Available in 1" (2.5 cm) inlet (834S) and 1 1/2" (3.8 cm) inlet (854S)
ACME, NPT and BSP threads
Constant Velocity Full-circle Drive
Provides consistant rotation speeds from sprinkler to sprinkler
The Industries Largest and Most Flexible Nozzle Selection
With the industries largest selection of nozzles Toro sprinklers allow you to put the precise amount of water exactly where you need it.
With its 20,000 volt lightning rating, the industries highest, the Spike Guard™ solenoid has virtually eliminated the need for solenoid replacement in high lightning environments. And with 1/2 the amperage draw of traditional solenoids you can run twice as many sprinklers simultaneously, reduce the cost of wiring during initial installation or increase the distance from controller to sprinkler.
Indestructible Stainless Steel Valve Seat
Never gets damaged; never requires replacement; lower cost of ownership
Slow closing piston valve eliminates pressure surges
Slow closing piston valve eliminates the high pressure surges that can damage the sprinkler, valves and piping systems.
Selectable pilot valve
Allows pressure regulation adjustment at the sprinkler to 50, 65, 80 or 100 psi (3.4, 4.5, 5.5 or 6.9 bar).
Removable rock screen
Allows you to flush debris out of the piping system from the top of the sprinkler
Check Valve Standard
Prevents low head drainage, puddling and soil erosion
Effluent Water Models Available
Models are available with lavender marking to identify the use of non-potable water.
Electric Valve-In-Head Solenoid-834/854
Electric Valve-in-head solenoid 24V ac, 50/60 Hz