Skip Ribbon Commands
Skip to main content

Workman® HDX-4WD (07386)

  • 32.5 hp (24.2 kW) Kubota® engine 972EFI
  • 4 Wheel Drive
  • Total Payload Capacity of 3,190 lbs. (1,291 kg)
  • Towing Capacity of 3,500 lbs. (1,587 kg)
A tough, 4-wheel drive vehicle providing durability, excellent driving performance and versatility.

Payload Capacity

The Workman® HDX 4WD vehicle provides total payload capacity of 2,835 lbs. (1,289 kg).

DeDion Rear Axle

The DeDion rear axle design is an automotive technology which isolates the engine, transmission and main frame from all load forces, eliminating stress to these main components. The I-beam design provides superior ability to handle vertical loading, exactly the reason I-beams are used extensively in the construction industry.

Disc Brakes

4 wheel hydraulic disc brakes provide greater stopping power and easier servicing than traditional drum brakes.

Four Wheel Drive Traction

Automatic, on demand, bi-directional four wheel drive traction system provides additional traction when needed without operator action.

Front Impact Bumper

A specially designed composite bumper with seven (7) energy absorbing crush zone cones protects the Workman to withstand impacts up to 3 mph (4.8 km/h) under full load with no permanent deformation.

High Performance Engine

Liquid cooled diesel engine provides excellent low end torque and is EPA Tier 4 emmission compliant and B20 biodiesel ready.

Ride Quality

Independent front suspension consisting of two double A-frames with opposing dual coil springs and dual shock absorbers provides 5.75 in. (14.6 cm) of front suspension travel. Rear suspension design consists of a DeDion rear axle and dual independent leaf springs and shock absorbers to provide 3 in. (7.6 cm) of rear travel. Benefits include operator comfort, safety, reduced operator fatigue, productivity and efficiency gains.

Tough Frames

The Workman® front space frame design is multi-dimensional or truss like, providing superior strength and torsional rigidity in rough terrain. The rear frame uses a C-channel design to provide superior strength in hauling heavy loads.

Operator Comfort

In addition to excellent ride quality, the HD Series offers an easy to read instrumentation package, enhanced leg room, a radio / beverage holder, easy to reach controls and a deep storage box.


The Workman® can perform a variety of work tasks beyond hauling and towing with attachments such as a 200 Gallon (757 Litre) Sprayer, Vicon® Spreader, 1/3 Vertical Platform Lift, Patriot® Aerial Lift and Topdressers. Numerous accessories enhance versatility including Canopy, Folding Windshield, Various Light Kits, Deluxe Hard Cab, Various Flatbeds, 4-Post ROPS, Automatic Tailgate Release, Rear PTO and others.

Brake System 4 wheel hydraulic disc brakes.
Engine 32.5 hp (24.2 kW) Kubota® engine 972EFI
Four Wheel Drive Automatic, on-demand, bi-directional system.
Front Suspension Independent double A-Frames with opposing dual coil springs and dual shock absorbers provides 5.75 in. (14.6 cm) of front suspension travel.
Rear Suspension DeDion rear axle and dual independent leaf springs and shock absorbers to provide 3 in. (7.6 cm) of rear travel.
Turning Radius 50 degrees
Warranty 2 year limited warranty

Workman® HD Accessory Guide

View all available accessories and attachments in the Accessory Guide.


To keep operators and passengers cool in the sun and dry in the rain, the Workman HD Series has a custom designed extra-wide canopy with rear moisture drainage outlets. Made of durable, high density polyethylene.

Deluxe Hard Cab

ROPS (Roll Over Protection System) and CE certified cab enclosure. Features a vented front windshield for cross ventilation, glass windshield and side panels for increased visibility, and standard automotive latching system for tight seals on doors and windows. Interior dome light and 2-speed windshield wiper.

Folding Windshield

Clear high-impact modified acrylic. Quick and easy fold-down for airflow to enhance operator/passenger comfort. Added flexibility of full protection against elements in fold-up position.

Hand Throttle

Mechanical throttle and speed control to provide constant RPM for stationary attachments, or a controlled maximum speed for applications such as spraying or spreading.

High Air Intake Kit

Kit extends the air intake system from underneath the cargo bed to a position slightly above the ROPS shield behind the passenger position of the vehicle.

Plastic Bedliner

A rugged, weatherproof plastic constructed liner that protects the cargo bed.

Rear PTO

Rear mounted, 540 RPM, PTO shaft mechanically driven by transaxle.

Rear View Mirror Kit

8 ½ in. (21.6 cm) convex mirror with mounting capability on either the operator or passenger side of the vehicle.

Right or Left Side Driving Light Kits

Provides turn signal lights for both corners in the front and rear, as well as brighter beam headlights. Right side kit for users where driving is done on the right side of roads; left side kit for users where driving is done on the left side of roads such as England or Australia.

4-Post ROPS

Provides operator additional protection in case of roll over.

ROPS Signal Light Kit

Consists of two double amber warning lights and two single red tail lights, all mounted on top ROPS bar.

Work Light Kit

Consists of three work lights for mounting on top ROPS bar. Two lights forward facing and one light rearward facing.


Electrically powered heater provides enhanced comfort when needed on cold weather days.

Sprayer, 200 Gallon (757 liter)

The Toro Workman® 200 Gallon (757 liter) Sprayer provides precise applications of herbicides, fungicides, pesticides, or fertilizers. With the easy Toro on/off system, your Workman® utility vehicle is quickly transformed into a highly productive sprayer.

ProPass™ 200 Topdresser

A 21 ft³ (.54 m³) capacity topdresser that delivers extremely consistent spread patterns. An available wireless controller provides an easy method for controlling spread functions.

Vicon® Spreader

Pendulum action spreader for spreading sand, fertilizers, seed and other dry material.

Topdresser 1800

An 18 cubic foot (.5 cubic metre) topdresser that is durable, flexible and delivers an even rate of application - whether high or low rates of application are required. Also great for spreading sand and salt on sidewalks for ice control.

Patriot® Aerial Lift

The Patriot® Lift is perfect for golf course maintenance, orchard maintenance, street lights, residential aerial work, awning work, painting, and other jobs that require the ability to safely work aloft. The lift is powered by a 12 volt permanent magnet motor/pump and is equipped with a 12 volt deep cycle battery, 40 amp automatic battery charger and discharge meter. The aluminum walk through bucket is hydraulically leveled and has a working height of 23 feet with a side reach of 11.5 feet (3.5 m). The lift includes electric side mount outriggers that provide stability to the vehicle. The lift can be quickly detached from the vehicle frame allowing the Workman® to be used for other applications with minimal downtime.
View a video of the Patriot® Lift.

Vertical Platform Lift

The lift raises eight feet (2.5 metres) from the ground providing you with 12-14 feet (3.7 - 4.3 metres) of working height for tree trimming, changing light bulbs, and accessing other hard to reach areas.

Product LiteratureBrochureEnglish PDF
Product LiteratureSell SheetEnglish PDF
AccessoriesAccessory GuideEnglish PDF
SpecificationsSpecificationsEnglish PDF
CARB WarrantyEnglish PDF1 Pages
Operator ManualEnglish PDF64 Pages
 Danish PDF64 Pages
 German PDF68 Pages
 Spanish PDF68 Pages
 Finnish PDF64 Pages
 French PDF68 Pages
 Italian PDF68 Pages
 Dutch PDF68 Pages
 Norwegian PDF64 Pages
 Portugese PDF68 Pages
 Russian PDF76 Pages
 Swedish PDF64 Pages
Parts CatalogEnglish PDF80 Pages



Select your printing preference

  • Overview
  • Features
  • Specifications
  • Accessories
  • Attachments
  • Manuals
  • Images & Video

Workman HD

The Toro Workman HD utility vehicles are built tougher than ever, and are ready to handle your work challenges.

Experience the HD

Workman MD

The Workman MD is designed to provide superior ride quality, optimum operator comfort, increased payload and towing capacity.

Experience the MD

Toro Genuine Parts

Quality is what you expect out of Toro products, and our parts are no different. To meet your needs we ensure each part meets the highest quality standards.

Toro Genuine Parts

Toro Advantage

News & Information from Toro to help you and your course.

View Site
Subscribe now