The Toro® ProCore® 648
Learn more about the innovative aerator - ProCore® 648!
Deeper, High Quality Holes
RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result.
Ease of Operation
A single switch on the handle controls the tine head and a handle bail engages forward and reverse. No shifting required. A fail safe system stops the machine and lifts the coring head if bail handle is released.
The ProCore 648 is more efficient with a 48 inch (121.9cm) aeration swath that is 50 - 100 percent wider than competitive units.
The ProCore 648 allows you to aerate more areas in one day with the 48 inch (121.9 cm) aerating swath and clean up is easier and less labor intensive resulting in less time.
Innovative Rear Wheel Placement
The wheels are located in front of the aeration head so they do not drive over the freshly aerated turf and run over the cores.
Series/Parallel 3-Wheel Drive
The patented 3-wheel series/parallel traction drive, combined with high-torque, low-speed wheel motors, prevents slippage for reliable traction and even hole spacing.
Smooth, Quiet, Powerful
To give the ProCore 648 its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.
TrueCore™ Ground Following
TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 4" (10.2 cm).
Variable Hole Spacing
The ProCore 648 gives you more control with variable hole spacing ranging from 1.5 inches to 3 inches (3.8 cm to 7.6 cm) apart.