Skip Ribbon Commands
Skip to main content

52" (132 cm) 25 HP 725cc (74903)

  • 25 hp (18.6 kw) Kohler Command 725cc Engine
  • 52 in (1.3 m) TURBO FORCE deck
  • Deluxe suspension seat features thick cushions, large bolsters and
    3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue
  • Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points
Z Master® Professional 5000 - 25 hp (18.6 kw) Kohler® Command 725cc Engine with 52 in (1.3 m) TURBO FORCE® deck. Model Shown 74915

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

Industry's Toughest Spindle Assemblies

Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.

72" Deck will have tapered bearing only.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Suspension Seat

Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smooth, Powerful Response

The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Convenience and Comfort

Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.

Engine 25 hp* (18.6 kw) Kohler® Command 725cc
Fuel Capacity Gasoline - 12 gal (45.5 L) single-point fill
Adjustable Discharge Baffle Standard
Air Filter Heavy-Duty Canister Air Cleaner
Blade Tip Speed 18,500+ ft/min (5,638.8 m/min)
Blade Type .25 in (.2 cm) thick heat-treated steel
Carrier Frame 3 in x 1.5 in (7.6 cm x 3.8 cm) tubular steel
Caster Tires 13 in x 6.5 in - 6 in (33.0 cm x 16.5 cm - 15.2 cm) flat-free semi-pneumatic
Deck Design 7-gauge 52 in (1.32 m) TURBO FORCE® w/bull-nose bumper
Discharge Chute Rubber
Drive System Hydraulic unitized pumps and wheel motors
Drive Tires 23 in x 9.5 in -12 in (58.4 cm x 24.1 cm - 30.5 cm)
Ground Speed 10 mph (16.1 kph) forward
Height of Cut 1 in - 5.5 in (2.5 cm -14 cm) by.25 in (.6 cm) increments
Hydraulic Fluid Premium synthetic
ROPS Folding; standard
Seat Deluxe suspension
Spindle Bearings Geasable ball bearings
Spindle Housing Cast iron
Steering Controls 1.625 in (4.1 cm) dia. levers; adjustable
Disclaimer *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

E-Z Vac™ DFS Collection System

Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

E-Z Vac Twin & Triple Bagger Systems

Toro® Z Master® E-Z VacTM Twin and Triple Baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

Light Kit

The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

Operator-Controlled Discharge Chute

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Recycler® Mulching Kits

Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.

Roller Striping Kit

Roller striping kit is easily installed and provides a premium "ball park" after-cut appearance.

Toro Z Stand

Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

TypeDownloadPages
CARB WarrantyEnglish PDF1 Pages
Operator ManualEnglish PDF68 Pages
 Spanish PDF68 Pages
 French PDF72 Pages
Parts CatalogEnglish PDF36 Pages
Setup InstructionsEnglish PDF16 Pages

Select your printing preference

  • Overview
  • Features
  • Customer Reviews
  • Specifications
  • Accessories
  • Manuals

Financing

Toro offers a wide variety of financing solutions through our participating independent dealers.

Financing Options

Demo a Toro Today

Our toughness is your strength. Schedule a demo or visit a demo event at one of our Toro Commercial Dealers today.

Demo a Toro Today

Stay Safe with Toro

Stay safe when using your Toro product. View videos, find general safety tips and view operator safety training manuals.

Visit our Safety Page