Skip Ribbon Commands
Skip to main content

ProLine Mid-Size WPM

How do I obtain a replacement Owner's Manual or Parts Manual?
To request or download a replacement Owner's Manual or Parts Manual, you will need the model and serial number of your machine.

Back to Questions

Where can I buy parts?
Toro parts are sold exclusively through our network of Toro Authorized Service Dealers.  Please use our Dealer Locator to find the closest dealer near you.

Back to Questions

What if my mower won't start?
If your machine will not start, please verify the following: 
  • Fuel tank is full. 
  • Fuel shut off valve is in the open position. 
  • Throttle lever is in the choke position. 
  • Air filter is clean.
  • Spark plug is in good condition and securely connected. 
  • Fuel filter is clean. 
  • Fresh fuel. (Dirt, water or stale fuel in the fuel system can cause the unit not to start).

If you need additional assistance, please contact your local Toro Authorized Service Dealer.

Back to Questions

Does Toro recommend a stand on sulky for their Mid-Size mowers?
Yes, Toro has developed the Toro Tru Trak™ Sulky model number 30110 for all Toro ProLine Mid-Size mowers no matter when produced. 

Contact your local Toro Authorized Dealer for availability and pricing.

Back to Questions

How do I obtain the best quality of cut from my mower?
To obtain the best quality of cut:
  • Make sure the blade is sharp (for best results, replace or sharpen yearly or when needed).
  • Operate the machine at full throttle.
  • Cut only 1/3 of the grass blade at a time.
  • Mow only dry grass or leaves.
  • Verify using correct blade for type of mowing (i.e. recycler blades for recycling , High Sail blade for side discharge.) 

If the finished lawn appearance still is unsatisfactory, try one or more of the following:

  • Slow down the ground speed of the unit.
  • Raise the cutting height on your mower deck.
  • Cut the grass more frequently.
  • Overlap the cutting swaths instead of cutting a full swath with each pass.
  • Alternate mowing direction to keep the grass standing straight - this helps disperse clippings, which enhances decomposition and fertilization.
  • Clean the clippings and dirt from the underside of the mower deck after each use. (Grass build up inside the mower will affect cutting quality.)
  • Verify correct belt tension to the cutting deck.

Back to Questions