Midmount Spring Tine Toolbar
Flexible 1/4"x 5" (6 mm x 12.7 cm) tines designed for light scarifying and breaking up top crusts after rains.
Midmount Scarifier/Leveling Blade
Mid-mount leveling blade attaches to any tine toolbar to quickly level out large areas. Selectable depth engagement from ground level to 1.5 (3.8 cm), 52 (132.1 cm) width, transport height 6.75 (17.1 cm)
Midmount Solid Tine Toolbar
Reversible solid tines designed for aggressive scarifying and harder surfaces (carbide tipped teeth are also available for the harshest conditions).
Rear Finish Grader
QAS Designed for leveling and/or scarifying large areas like difficult sports field areas. 66 (168cm) width, box plow and scarifier, 1.8 (4.5cm) max working depth, spring load regulation to allow relief if an obstruction is hit. Hardened carbide tips available for scarifier teeth.
Rear Drag Mat Carrier System
QAS mounting carrier frame designed to eliminate the need to manually lift drag mats between passes and traveling from field to field. 72 (183cm) width, accepts steel or cocoa drag mats. Hydraulic raise/lower of drag mats.
Rear Cocoa Drag Mat
Designed to quickly produce a premium finish on dry bunkers.
QAS™ Bunker Pump
Bring your flooded areas back in play faster while requiring only one person to operate. Driven by the Sand Pro's powerful onboard hydraulics, the QAS™ Bunker Pump throws water up to 40 feet (12.2 metres), pumping 95 gallons per minute (360 litres per minute). The Bunker Pump utilizes the exclusive Quick Attach System™ (QAS) and can mount on the front or rear of a Sand Pro® (rear-only for the 3040) for added versatility. An available hose kit gives added flexibility allowing the QAS™ Bunker Pump to be dropped into hard to reach areas.
Download Bunker Pump Brochure.
QAS Ground driven design for spiking and increasing air flow on turf. Rear QAS 57.6 (746cm) width, 1.25 (3.1cm) max working depth, 2.4 (6.1cm) blade spacing. Two independently floating units, with 12 spiker blades and 11 hold down fingers.
Rear Segmented Grooming Broom
QAS grooming brooms designed to minimize top surface disruption to maximize firmness for a smooth finished look.
Front Manual Blade
Spring balanced manual blade, designed for leveling out uneven areas. Comes with additional foot lever to enable operator to easily apply added down pressure. 40 (101 cm) width steel blade, spring assisted for raising plow.
Rear Spring Rake
QAS spring leaf rake assembly designed for sole use or in combination with tooth rake to achieve desired appearance. Great for wet conditions and collecting debris in groomed areas. Rear QAS 76" (193cm) width, with 5 individual rake sections and spring teeth for excellent floatation and minimal surface disruption.
Front 60" (152.4 cm) Blade Extension
60" (152.4 cm) bolt on expansion blade designed for leveling out larger uneven areas (for manual blade only).
Rear Tooth Rake
QAS Grooming rake designed to lightly scarify, pack, smooth and groom in one pass (for wet or dry conditions). Great for improving the performance of neglected sports fields. 72" (183cm) width, with 5 rake sections, 27 prongs adjustable for depth and wear.
Rear Steel Drag Mat
Designed to quickly groom and finish wet or dry sports fields, while minimizing the displacement of infield mix especially into the outfield.
Midmount Weeder Tine Toolbar
Cultivation style tines for removing weeds and grass from unwanted areas.
Rear Hitch Kit
200 lbs (90.7 kg) gross trailer weight/ hitch load.
Rear Debris Blower
QAS high power cyclone blower designed to quickly clear debris from groomed and unwanted areas. Hydraulically powered, 2000 rpm fan speed - 2700 cfm @ 81 mph (76.4 cmm @ 130 kph).