Skip Ribbon Commands
Skip to main content

48" (122 cm) 23 HP 747cc EFI (74588)

  • Closed-loop EFI provides improved fuel efficiency resulting in lower emmissions
  • Exceptional hillside traction and handling
  • High productivity in a compact size
  • Operator platform suspension reduces fatigue and is foldable to allow for walk-behind operation
GrandStand® stand-on mower, 23 HP Kohler® Command EFI 747cc with 48" (122 cm) TURBO FORCE® deck.

Fatigue-Reducing Suspension

The revolutionary Flex-Ride operator platform suspension* keeps operators fresh, resulting in less fatigue and higher productivity throughout the day. Best of all, the suspension system is self-compensating for operators of different sizes.

2-in-1 Versatility

In situations where the operator may want or need to walk, Toro's foldable operator platform instantly converts the GrandStand to a walk-behind. When it's time to ride, just lower it back down - saving time, money and trailer space by eliminating the need to switch from one mower to another.

Stand-on Mower Productivity

The ability to turn easily, get in and out of tight spaces, and quickly get on and off the mower to pick up debris or move obstacles all contribute to less time spent per property. The exceptional visibility of the GrandStand protects the operator, the mower and the property. The operator is better able to steer clear of obstacles, identify upcoming changes in terrain and easily pass beneath overhanging branches.

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

The Industry's Toughest Spindle Assembly

Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.

Traction and Handling

The wide stance and optimal weight balance of the GrandStand enhance hillside stability and control. Because there are no restrictions to limit operator motion, operators can shift weight as needed to further enhance the performance of the machine.

Big on Features, Not Size

The GrandStand conserves space to get more machines on your trailer or allows for a smaller trailer and a lighter load. And the unique, foldable operator platform makes the product even more compact for transport or storage. Some property owners have negative reactions to larger, heavier-looking mowers, and are concerned that their lawns may be damaged. With the sleeker Toro GrandStand, that problem is eliminated.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Heavy-Duty Muffler Guard

Heavy-duty, 7-gauge muffler guard protects muffler against damage.

Engine 23 HP*Kohler® Command EFI 747cc
Fuel Capacity Gasoline - 7.8 gallons (30 L)
Air Filter Dual element
Blade Tip Speed 18,500+ ft/min (5,640 m/min)
Blade Type 1/4" (6 mm) thick heat-treated steel
Carrier Frame 3" x 1.5" (7.6 cm x 3.8 cm) x 12 guage
Caster Tires 11" x 4" - 5" (28 cm x 10.2 cm -12.7 cm) flat-free semi-pneumatic
Cooling System Air-Cooled
Deck Design 7-gauge 48" (122 cm) TURBO FORCE® with bull-nose bumper
Discharge Chute Rubber
Drive System Hydraulic pumps and wheel motors
Drive Tires 20" x 10.5" - 8" (51 cm x 27 cm - 20.3 cm)
Ground Speed 8.0 mph (13 km/h) forward
Height of Cut 1"- 5" in 1/4" (2.5 cm - 12.7 cm in 6 mm) increments
Hydraulic Fluid Premium synthetic
Spindle Bearings Greasable ball bearings
Spindle Housing Cast iron
Steering Controls Twin Lever
Disclaimer * The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAEJ2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Recycler® Mulching Kits

Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.

Operator-Controlled Discharge Chute

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Cup Holder and Debris Bag

Convenient carrier holds your drink and other personal items. Bag can also be used to collect debris - multiple styles available. (Optional items)

Striping Kit

The optional striping kit is easily installed and provides a premium "ball park" after-cut appearance.

Light Kit

The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

TypeDownloadPages
Operator ManualEnglish PDF68 Pages
 Spanish PDF72 Pages
 French PDF72 Pages
Parts CatalogEnglish PDF52 Pages
Setup InstructionsEnglish PDF8 Pages

Select your printing preference

  • Overview
  • Features
  • Customer Reviews
  • Specifications
  • Accessories
  • Manuals

Financing

Toro offers a wide variety of financing solutions through our participating independent dealers.

Financing Options

Demo a Toro Today

Our toughness is your strength. Schedule a demo or visit a demo event at one of our Toro Commercial Dealers today.

Demo a Toro Today

Stay Safe with Toro

Stay safe when using your Toro product. View videos, find general safety tips and view operator safety training manuals.

Visit our Safety Page