| |
- Features
- Accessories
- Specifications
Smooth, Quiet, Powerful

|
Smooth, Quiet, Powerful
To give the ProCore® 648 its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.
|
TrueCore™ Ground Following

|
TrueCore™ Ground Following
The TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 4".
|
Variable Hole Spacing

|
Variable Hole Spacing
The ProCore® 648 gives you more control with variable hole spacing ranging from 1.5 inches to 3 inches apart.
|
Deeper, High Quality Holes

|
Deeper, High Quality Holes
RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result.
|
Ease of Operation

|
Ease of Operation
A single switch on the handle controls the tine head and a handle bail engages forward and reverse. No shifting required. A fail safe system stops the machine and lifts the coring head if bail handle is released.
|
Efficient Aeration

|
Efficient Aeration
The ProCore® 648 is more efficient with a 48 inch aeration swath that is 50 - 100 percent wider than competitive units.
|
High Productivity

|
High Productivity
The ProCore® 648 allows you to aerate all 18 greens in about 7.2 hours* and clean up is easier and less labor intensive resulting in less time.
*Assumes average 6500 sq./ft. greens, 2"x2" linear hole spacing, 1000 feet between greens at maximum transport speed and standard "tear-drop" style turnarounds.
|
Innovative Rear Wheel Placement

|
Innovative Rear Wheel Placement
The wheels are located in front of the aeration head so they do not drive over the freshly aerated turf and run over the cores.
|
Series/Parallel 3-Wheel Drive

|
Series/Parallel 3-Wheel Drive
The patented 3-wheel series/parallel traction drive, combined with high-torque, low-speed wheel motors, prevents slippage for reliable traction and even hole spacing.
|
Rear Roller

|
Rear Roller
48 inch wide roller that helps smooth out surface imperfections while performing needle or solid tine aeration.
|
Tine Holders

|
Tine Holders
Customize your aerator with a choice of five tine holders.
|
Tire Scrapers

|
Tire Scrapers
Removes any soil accumulation from rear tires.
|
Weight Kit

|
Weight Kit
Up to two additional 60 lb. (28.6 kg) weights can be added to ensure maximum penetration in hard soil.
|
Windrower

|
Windrower
Directs cores into neat, narrow rows for easy collection and removal.
|
 |
Coring Width |
48 inches (1.2 m) |
 |
Coring Depth |
Up to 4 inches (102 mm) |
 |
Engine |
23 HP Kohler® gas |
 |
Forward Speed |
0-3.5 mph |
 |
Reverse Speed |
0-2.0 mph |
 |
Width |
52 inches |
 |
Height |
45 inches |
 |
Length |
105 inches |
 |
Weight (less fuel) |
1,590 lbs. (689 kg) |
 |
Warranty |
2 year or 500 hour limited** |
|