Sand Pro® 3040

Steerable Front Attachments (5040)

Steerable front attachments on the Infield Pro 5040 give operators the precision never before offered in this industry. The newly designed Flex Blade is adjustable to different environments (wet/dry), scarify, level and smooth in the same pass. Improve the operators ability to push up bunker walls after washout. Hydraulic float position and steerable blade reduces operator influence and the potential for damage. Combined, these features Improve the consistency between bunkers, operators and weather conditions.

3WD Series Parallel Traction Drive

The 3WD Series Parallel traction drive improves traction in wet or heavy working conditions to get the job completed quickly. In traditional 3WD units all traction effort is lostas soon as one wheel slips. Series Parallel ensures that you always have tractive effort with at least one wheel to keep your unit from getting stuck and losing precious time.

Ease of Use

Easy to use and adapt to the next task. Having the right tool for the job increases the effectiveness of your crew and the efficiency of your operation. Attachments are designed to minimize operator influence to achieve the same result, regardless of whether a new or veteran employee performed the task.

Power Packed Engines

Choose from an 18-hp engine in the 5040 or 16 hp in the 3040 and 2020. These trusted Vanguard® engines are fuel efficient, run cooler and feature a fully pressurized oil lubrication system for longer life.

Quick Connect Hydraulics

The new quick connect hydraulics allow anyone to connect or disconnect any of the powered attachments in under a minute. This eliminates the need for dedicated equipment.

Maintenance Friendly Layout

The new unit was designed with the mechanic in mind, to reduce, simplify, and increase access to all scheduled maintenance. The majority of scheduled maintenance projects can be accessed by lifting the operator seat. For increased access, the side and center quarter panels can be taken off by removing just a few bolts

Maneuverable Steering

For operator ease of use, and to improve the effectiveness of the steerable front attachments, hydraulic power steering is now available on the 5040 and a rugged gear drive system on the 3040. Both designs are now environmentally sealed to ensure long life and reduced maintenance.

Front Manual Blade (3040)

Finger tip operation (no overhead bar), paired handle/foot pedal and torsion bar to improve down pressure provide level/consistent contouring in difficult areas. Quick-up latch locks blade in transport position between uses to improve operator ease of use.

Mid-Mount System

With the Mid-mount system, a flex mounted toolbar can be adjusted to flex backwards when it comes in contact with anything from rocks or other rigid objects to prevent gouging or wash boarding. Multiple locking depth settings to ensure consistent depth of scarification from day to day or between operators. A mid-mount leveling system is also available to make quick work of the difficult projects like around dugouts or player positions.

Extremely Multifunctional

The revolutionary Quick Attach System (QAS) gives any member of your maintenance crew the ability to switch out any of the front or rear attachments in under a minute. This reduces the need for additional traction units when dealing with heavy rain or difficult infield mixes. The QAS keeps the product out on your field where it can begin to pay for itself.

Quick Attach System (QAS)

With the Quick Attach System (QAS), anyone can switch from one attachment to another in less than a minute, with no tools required! Match the machine to the environment to get your course back into playing condition The QAS allows you to do more with less, and get the job done faster.
Rear QAS standard on the Sand Pro 3040 and Sand Pro 5040, front QAS optional on the Sand Pro 5040. .

Reduced Simplified Maintenance(RSM)

Improved access to maintenance components and improved rugged design reduces the time needed to maintain the product. Less time spent maintaining and fixing units leaves more time to complete the desired tasks to keep your course in top playing condition.

QAS Bunker Pump

Bring your flooded bunkers back in play faster while requiring only one person to operate. Driven by the Infield Pro’s powerful onboard hydraulics, the QAS Bunker Pump throws water up to 45 feet, pumping 95 gallons per minute. The Bunker Pump utilizes the exclusive Quick Attach System (QAS) and can mount on the front or rear of an Infield Pro for added versatility. An available hose kit gives added flexibility allowing the QAS Bunker Pump to be dropped into hard to reach areas. Download Bunker Pump sell sheet.

Midmount Weeder Tine Toolbar

Cultivation style tines for removing weeds and grass from unwanted areas

Front 60" Blade Extension

60"(152.4 cm) bolt on expansion blade designed for leveling out larger uneven areas (for manual blade only)

Front Hydraulic Flex Blade

36 (91.4 cm) width steel blade
4 position settings:
Raise, Hold, Lower, and Float
Infield Pro 5040 only

Midmount Hardware

Base mounting assembly for the 3 different toolbars.

Front Manual Blade

Spring balanced manual blade, designed for leveling out uneven areas. Comes with additional foot lever to enable operator to easily apply added down pressure. 40 (101 cm) width steel blade, spring assisted for raising plow.

About Quick Attach System

This Changes Everything!
Introducing the 1st ever Quick Attach System (QAS), now anyone can switch from one attachment to another in less than a minute (no tools needed) giving you the ability to adapt to your environment rather than fighting with it. The new Sand Pro Bunker Rake will change the way you maintain your bunkers.

The new QAS gives you the right tool, for the right job, at the right time to get your course back into playing condition. Specially designed attachments make it easier to resurface problem areas.

Attachments are designed to reduce operator variability and improve consistency.

Improve the efficiency of your business.

Midmount Solid Tine Toolbar

Reversible Solid tines designed for aggressive scarifying and harder surfaces (Carbide tipped teeth are also available for the harshest conditions).

Midmount Spring Tine Toolbar

Flexible 1/4"x 5" tines designed for light scarifying and breaking up top crusts after rains

Rear Debris Blower

QAS high power cyclone blower designed to quickly clear debris from groomed and unwanted areas. Hydraulically powered, 2000 rpm fan speed (2700 cfm @ 81 mph)

Rear QAS Utility Box

QAS cargo box designed to convert the traction unit into an additional vehicle to transport tools and materials for repair or smaller construction jobs without tying up other resources or vehicles

Rear Segmented Grooming Broom

QAS grooming brooms designed to minimize top surface disruption to maximize firmness for a smooth finished look

Rear Drag Mat Carrier System

QAS mounting carrier frame designed to eliminate the need to manually lift drag mats between passes and traveling from field to field. 72 (183cm) width, accepts steel or cocoa drag mats. Hydraulic raise/lower of drag mats

Rear Cocoa Drag Mat

Designed to quickly produce a premium finish on dry bunkers.

Rear Finish Grader

QAS Designed for leveling and/or scarifying large areas like difficult sports field areas. 66 (168cm) width, box plow and scarifier, 1.8 (4.5cm) max working depth, spring load regulation to allow relief if an obstruction is hit. Hardened carbide tips available for scarifier teeth.

Rear Hitch Kit

200 lbs (90.7 kg) gross trailer weight/ hitch load

Rear Spring Rake

QAS spring leaf rake assembly designed for sole use or in combination with tooth rake to achieve desired appearance. Great for wet conditions and collecting debris in groomed areas. Rear QAS 76 (193cm) width, with 5 individual rake sections and spring teeth for excellent floatation and minimal surface disruption

Midmount Scarifier/Leveling Blade

Mid-mount leveling blade attaches to any tine toolbar to quickly level out large areas. Selectable depth engagement from ground level to 1.5 (3.8 cm), 52 (132.1 cm) width, transport height 6.75 (17.1 cm)

Rear Spiker

QAS ground driven design for spiking and increasing air flow on turf. Rear QAS 57.6 (746cm) width, 1.25 (3.1cm) max working depth, 2.4 (6.1cm) blade spacing. Two independently floating units, with 12 spiker blades and 11 hold down fingers.

Rear Steel Drag Mat

Designed to quickly groom and finish wet or drybunkers.

Rear Tooth Rake

QAS Grooming rake designed to lightly scarify, pack, smooth and groom in one pass (for wet or dry conditions). Great for improving the performance of neglected sports fields. 72 (183cm) width, with 5 rake sections, 27 prongs adjustable for depth and wear