ProCore® 648

High Productivity

The ProCore® 648 allows you to aerate all 18 greens in about 7.2 hours* and clean up is easier and less labor intensive resulting in less time.

*Assumes average 604 sq. meters (6500 sq./ft.) greens, 51x51 mm (2"x2") linear hole spacing, 305 meters (1000 feet) between greens at maximum transport speed and standard "tear-drop" style turnarounds.

Innovative Rear Wheel Placement

The wheels are located in front of the aeration head so they do not drive over the freshly aerated turf and run over the cores.

Series/Parallel 3-Wheel Drive

The patented 3-wheel series/parallel traction drive, combined with high-torque, low-speed wheel motors, prevents slippage for reliable traction and even hole spacing.

Smooth, Quiet, Powerful

To give the ProCore® 648 its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.

TrueCore™ Ground Following

The TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 10 cm (4").

Variable Hole Spacing

The ProCore® 648 gives you more control with variable hole spacing ranging from 38 mm (1.5 inches) to 76 mm (3 inches) apart.

Deeper, High Quality Holes

RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result.

Ease of Operation

A single switch on the handle controls the tine head and a handle bail engages forward and reverse. No shifting required. A fail safe system stops the machine and lifts the coring head if bail handle is released.

Efficient Aeration

The ProCore® 648 is more efficient with a 1.2 meter (48 inch) aeration swath that is 50 - 100 percent wider than competitive units.

Rear Roller

122 cm (48 inch) wide roller that helps smooth out surface imperfections while performing needle or solid tine aeration.

Tine Holders

Customize your aerator with a choice of four tine holders.

Titan® QuickChange™ Tine Heads

Titan QuickChange tine heads help to increase the speed and effectiveness of the aeration process. The innovative design allows for tines to be changed quickly and easily, even while in the field, for more efficient turf aeration. Learn more.

Tire Scrapers

Removes any soil accumulation from rear tires.

Weight Kit

Up to two additional 60 lb. (28.6 kg) weights can be added to ensure maximum penetration in hard soil.

Windrower

Directs cores into neat, narrow rows for easy collection and removal.