Toro Canada/English Choose another region
Toro HomeownerGolf Course ManagementCommercial/ContractorSports Fields and GroundsProfessional Irrigation
Products Customer Care Dealer Locator
Locate a Dealer
Display page formatted for printing

74408

Z300 - 19 hp Kawasaki® KAI 86 cm (34") 7-gauge deck fits through 91 cm (36") gates with ease..

Product Details

  • 7-gauge fabricated deck
  • 24 cm (9-3/8") cast-iron spindle housings
  • Patented rubber discharge deflector
  • 6 mm (¼") thick, high-strength alloy steel blades
  • Semi-pneumatic flat-free caster tires

Learn More

Z Master Z500 video clips
Toro Safety Program
 
  • Features
  • Accessories
  • Specifications
  • Powered by Kawasaki

7-gauge Deck


7-gauge Deck

Z300 Series decks are not only strong (see Deck Construction), but they deliver an immaculate after-cut appearance that can't be beat. Available in 34" and 40" cutting widths.

*Z400 Series shown


A flat, crisp cut with precision blades


A flat, crisp cut with precision blades

6 mm (1/4") thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.


Deck Construction

Deck Construction

Constructed of high-strength 4,5 mm welded steel, the deck shell is extremely resistant to impacts and abrasion. The TURBO FORCE deck has more than enough capacity to handle the most demanding conditions. The 86 cm (Z334) and the 102 cm (Z340) decks offer side-discharge or Recycler® capabilities.


Rubber Discharge Chute


Rubber Discharge Chute

High performance 8 mm (5/16") rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.


The industry's toughest spindle assembly


The industry's toughest spindle assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 24cm (9-3/8") diametre base, absorbs impact loads and distributes them across a broader area of the robust deck shell.


Recycler® Mulching Kits


Recycler® Mulching Kits

86cm (34") and 102cm (40") Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging.


Deck-Mounted Bagger


Deck-Mounted Bagger

Provides for easy debris handling, and is quick and easy to attach or remove. Great for seasonal clean up and small jobs.


Optional Blades


Optional Blades

In addition to the high sail blade which comes standard on Z Master® Z300 Series mowers, additional 13mm (1/4") blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahia blades, and low sail sand blades.


Operator-Controlled Discharge Chute-OCD


Operator-Controlled Discharge Chute-OCD

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the ODCD will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.


19 hp engine Kawasaki® KAI
Cutting Deck 86cm (34") 7-gauge
Spindle Housings Cast iron with 24cm (9-3/8") base
Spindle Bearings Ball bearings
Blades 6mm (1/4") thick alloy steel
Blade Tip Speed 5,639+ m/min
(18,500+ ft/min)
Clutch 125 ft-lb Electromagnetic
Height of Cut 25mm - 127mm in 6mm increments
(1 - 5" in 1/4" increments)
Discharge Chute High-performance reinforced rubber
Carrier Frame 4cm x 5cm x 0,5cm tubular steel
(1 1/2" x 2" x 3/16")
Ground Speed 13 km/h forward
8 km/h reverse
(8 mi/h forward
5 mi/h reverse)
Hydraulic Drive System Dual-integrated commercial transaxles
Drive Tires 46 x 19 -20cm
(18" x 7.5"-8")
Caster Tires 28 x 10 -13cm flat-free
(11" x 4"-5")
Steering Controls 33mm (1-5/16") dia. levers; adjustable
Fuel Capacity 30 Litres
(7.7 gallons)

FH580V



FH580V

Kawasaki FH Series Engines are the standard of professional powerplants in many industries and products.

  1. Overhead v-valve
  2. 90-degree V-twin
  3. Pressurized lubrication
  4. Electronic spark ignition
  5. Automatic compression release
  6. Dual element air cleaner
  7. Internally vented carburetor with fuel shut-off solenoid
  8. Rotating grass screen
  9. Cast iron cylinder liners


 
 
Customer Care
Where to Buy, Service or Rent
Interactive Product Manuals
Operator's and Part's Manuals
Look Up Parts
Safety Information
Register Your Product Online
Frequently Asked Questions
Contact Us
Helpful Links
2010 LCE Full Line Brochure
View Attachments and Accessories
 
Toro
Toro
Back  Return To: Z300 Series
Toro
Model Shown 74408
The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.