Where to buy or service your Toro
|
 |
22307
Check out the Toro Dingo TX 425 - with its exclusive Wide Track, it extends your versatility, while improving your productivity when faced with a variety of landscapes and ground conditions. Equipped with a 25 hp (18 kW) Kohler gas engine, the Dingo TX 425 with its Wide Track offers incredible ground engaging power and awesome digging or trenching capabilities. But, at only 0.23 bar (3.4 psi) ground pressure, the Dingo TX 425 is extremely gentle on delicate turf. All of this awesome power is harnessed with only 3 easy-to-use hand controls. These simple controls coupled with walk behind operator position translate into extremely short learning curves, 360° visibility and instant productivity. Mounts each of over 35 attachments in seconds!
|
|
|
|
Product Details
|
-
25 HP (18 kW) Kohler® engine
-
Wide Track Design
-
Versatility
-
Low Ground Pressure
|
|
|
|
|
| |
- Features
- Accessories
- Specifications
Exclusive Track Drive
Exclusive Track Drive
Kevlar reinforced tracks, designed specifically for the Toro Dingo TX to offer excellent traction and floatation even in the most difficult conditions. This means you can power through the toughest jobs and still be light on the turf.
|
Hydraulic Power
Hydraulic Power
The Dingo TX 425 models' auxiliary hydraulic performance makes the most challenging ground conditions irrelevant by pumpimg 25 hp (18 kW) to the attachment. Four independent hydraulic pumps deliver:
63.9 lpm (16.9 gpm) of flow to each track
43 lpm (11.4 gpm) to the auxiliary
23 lpm (6 gpm) to the loader arm
|
4-Pump Hydraulic System
4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!
|
Air-Cooled Gasoline Engine
Air-Cooled Gasoline Engine
A 25 hp (18 kW) Kohler® engine provides the necessary power to drive Toro's 35+ attachments.
|
Simple Controls
|
Simple Controls
You're up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activiated while operating the traction drive, powers the attachments instantly.
|
Compact Size
Compact Size
Narrow enough so you can bring hydraulic power easily into 107 cm (42") access points; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.
|
Sun Shade
Sun Shade
Blocks the sun while providing the operator with clear 360 visibility. For use with the Toro Dingo backhoe attachment.
|
Ride-On Platform
Ride-On Platform
Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue - especially in applications requiring a lot of hauling and covering substantial distances.
Additional information
|
 |
25 HP (18 kW) Engine |
Kohler® Command Pro™ |
|
Cooling System |
Air Cooled |
|
Hydraulic System:Pressure |
207 bar (3000 psi) relief |
|
Flow |
42 lpm (11.2 gpm) |
|
Reservior Capacity |
40 liters (10.5 gallons) |
|
Track |
Kevler reinforced rubber |
|
Controls |
Key, throttle, choke |
|
Steering |
Single control w/ ref. bar |
|
Loader/ Hydraulic System |
Joystick control for all funct |
|
Dimensions:Grd. Clearance |
12 cm (4.6") |
|
Overall Length |
179 cm (70.5") |
|
Overall Width |
104 cm (41") |
|
Overall Height |
117 cm (46") |
|
Hinge Pin Height |
167 cm (66") |
|
Ground Speed |
0-7 km/h (0-4.5 mi/h) fwd, 0-6 km/h (0-2 mi/h) rev. |
|
Tip Capacity |
671 kg (1480 lbs.) |
|
Rated Operating Capacity |
227 kg (500 lbs.) |
|
Weight |
905 kg (1996 lbs) |
|
Engine Warranty* |
Two Year |
|
Product Warranty* |
One Year |
|
| |
|
| |
|
| |
|
|
