ProCore® 648

Deeper, High Quality Holes

RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result.

Ease of Operation

A single switch on the handle controls the tine head and a handle bail engages forward and reverse. No shifting required. A fail safe system stops the machine and lifts the coring head if bail handle is released.

Efficient Aeration

The ProCore® 648 is more efficient with a 1.2 m (48") aeration swath that is 50 - 100 percent wider than competitive units.

High Productivity

The ProCore® 648 allows you to aerate all 18 greens in about 7.2 hours* and clean up is easier and less labor intensive resulting in less time.

*Assumes average 604 sq./m greens, 51mm x 51mm linear hole spacing, 305m between greens at maximum transport speed and standard "tear-drop" style turnarounds.

Innovative Rear Wheel Placement

The wheels are located in front of the aeration head so they do not drive over the freshly aerated turf and run over the cores.

Series/Parallel 3-Wheel Drive

The patented 3-wheel series/parallel traction drive, combined with high-torque, low-speed wheel motors, prevents slippage for reliable traction and even hole spacing.

Smooth, Quiet, Powerful

To give the ProCore® 648 its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.

TrueCore™ Ground Following

The TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 10 cm.

Variable Hole Spacing

The ProCore® 648 gives you more control with variable hole spacing ranging from 38mm - 76mm apart.

Rear Roller

122 cm (48") wide roller that helps smooth out surface imperfections while performing needle or solid tine aeration.

Tine Holders

Customize your aerator with a choice of four tine holders.

Tire Scrapers

Removes any soil accumulation from rear tires.

Weight Kit

Up to two additional 27 kg (60 lb.) weights can be added to ensure maximum penetration in hard soil.*

*Maximum of 2 per machine.

Windrower

Directs cores into neat, narrow rows for easy collection and removal.