|
|
 |
Z400 Commercial Series
Series Overview
A combination of cut, quality and price. Compact and maneuverable, this is a great machine for the estate owner who wants to step-up to faster, more sophisticated equipment that delivers a superior looking cut.
|
| |
Comprehensive Warranty*
Comprehensive Warranty*
1 year Limited, 2 year Engine, Hydrostatic & Deck Shell and 3 year Spindle Assembly.**
|
7-gauge Deck
|
7-gauge Deck
Z400 Series decks are not only strong (see Deck Construction), but they deliver an immaculate after-cut appearance that can't be beat. Available in 48" and 52" cutting widths.
|
A flat, crisp cut with precision blades.
|
A flat, crisp cut with precision blades.
1/4" thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.*
*Z400 Series blades are similar to those found on the Z500 Series pictured below
|
Convenience and Comfort
Convenience and Comfort
Operator controls are conveniently grouped in a single location. Steering levers are adjustable to accommodate a wide range of operators. A built-in cup holder is provided.
|
Rubber Discharge Chute
|
Rubber Discharge Chute
High performance 5/16" rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
|
Rugged Frame
|
Rugged Frame
A commercial-grade carrier frame, constructed of 2" x 2" x 3/16" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
|
Deck Offset
|
Deck Offset
Z400 Series cutting decks are offset toward the trim side in order to provide trimming capabilities that are superior to those of comparable compact ZRTs. The trim side of the deck is also reinforced by a rugged 1/2" x 1-1/2" steel wear guard.
|
Folding Rollover Protection System ROPS
|
Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
|
The industry's toughest spindle assembly
|
The industry's toughest spindle assembly
Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.
|
7-gauge, high-strength steel
|
7-gauge, high-strength steel
Constructed of high-strength 7-gauge steel (50,000 psi minimum yield strength), the deck shell is extremely resistant to impacts and abrasion. At a full 5-1/2" deep, the deck has more than enough capacity to handle the most demanding conditions.
|
E-Z Vac DFS Collection System*
E-Z Vac Soft Bag Collection System
Recycler® Mulching Kits
|
Recycler® Mulching Kits
48" and 52" Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging.
|
Deluxe Suspension Seat
|
Deluxe Suspension Seat
Deluxe suspension seat improves operator comfort and reduces operator fatique when mowing for prolonged periods of time. Provides lumbar support and adjustable suspension, position, arm rests, and seat back angle.
|
Seat Suspension Kit
|
Seat Suspension Kit
Optional seat suspension system enhances operator comfort. Customizable to suit individual operator preferences. A value-priced alternative to the Deluxe Suspension Seat.
|
Optional Blades
|
Optional Blades
In addition to the high sail blade which comes standard on Z Master® Z400 Series mowers, additional 1/4" blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
|
Deck Lift Assist Kit
|
Deck Lift Assist Kit
Provides foot pedal that allows for the use of leg strength to raise and lower the deck more easily.
|
Light Kit
|
Light Kit
Contains three 37-watt lights that easily mount to the frame of Z400 Series mowers. Wiring quickly connects to the existing 12-volt accessory circuit.*
|
Z Stand Kit
|
Z Stand Kit
Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide easy access to the underside of the deck, at the shop or in the field. Just swing the on-board Z-Stand jack out in front of the cutting deck, then drive forward until it locks into place.*
|
Sun Shade
|
Sun Shade
Constructed of a UV- and water-resistant polyester fabric, the sun shade enhances comfort by protecting operators from the sun's rays. For use on 2-post ROPS systems, the shade is designed to fold for transport without the use of tools. Available at participating stocking dealers.
|
Utility Bags
|
Utility Bags
Toro® utility bags for riding mowers are ideal for holding trash, tools, keys, and cell phones. They keep landscaping pros on the go and productive by transporting the essentials they need to get the job done. The lightweight yet durable bags are constructed of heavy-duty mesh fabric to keep contents secure, visible and within reach. They're available in over-the-seat and arm-rest styles and in sizes that match varying machines…and mowing needs.
|
Cool Tops™ Downdraft System
|
Cool Tops™ Downdraft System
Available exclusively from Toro, the Cool Tops downdraft system is a patented, 12-volt fan that can be mounted to Toro® Z Master® riding mowers equipped with a roll-over protection system (ROPS) - whether old or new. It's designed to promote comfort and productivity by keeping motor heat, insects, and debris off equipment operators. The Cool Tops heavy-duty, S Blade Trimline fan utilizes the power system of a mower's traction unit to deliver an output of 1800 cubic feet per minute (cfm) air flow. The fan's sturdy construction measures 25 inches long by 20.5 inches wide and includes a steel frame, plus a waterproof motor and switch.
|
Deluxe Rider Cover
|
Deluxe Rider Cover
Toro's zero turn rider cover helps operators protect their mower - and their investment in it - by shielding the machine from the elements. The all-black cover is made from a 600 Denier polyester fabric that's waterproof as well as abrasion- and tear-resistant. Perfect as an overnight cover for mowers stored outside, it's also ideal for offering longer-term protection during winter storage. The vented design helps promote air movement around the mower to prevent build-up of harmful heat or moisture. The rider cover fits most styles of Z mowers.
|
Operator-Controlled Discharge Chute-OCD
|
Operator-Controlled Discharge Chute-OCD
Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the ODCD will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.
|
|
| |
|
| |
|
| |
|
|
