74441

Rugged Frame

A commercial-grade carrier frame, constructed of 2" x 2" x 3/16" tubular steel, supports the cutting deck and stands up to the rigors of professional use.*

*Z400 Estate Series shown

Deck Offset

Z400 Series cutting decks are offset toward the trim side in order to provide trimming capabilities that are superior to those of comparable compact ZRTs. The trim side of the deck is also reinforced by a rugged 1/2" x 1-1/2" steel wear guard.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

The industry's toughest spindle assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.

Comprehensive Warranty*

1 year Limited, 2 year Engine, Hydrostatic & Deck Shell and 3 year Spindle Assembly.**

**Third year parts only.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, at unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

A flat, crisp cut with precision blades.

1/4" thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.* *Z400 Series blades are similar to those found on the Z500 Series pictured below.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4", allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up is also significantly reduced.

Convenience and Comfort

Operator controls are conveniently grouped in a single location.
Large 1-5/8" diameter steering levers increase comfort and reduce fatigue.

7-gauge, high-strength steel

Constructed of high-strength 7-gauge steel (50,000 psi minimum yield strength), the deck shell is extremely resistant to impacts and abrasion. At a full 5-1/2" deep, the TURBO FORCE deck has more than enough capacity to handle the most demanding conditions.*

*Comparison based on 7-gauge high-strength steel versus ordinary 10-gauge commercial steel.

Rubber Discharge Chute

High performance 5/16" rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Exclusive TURBO FORCE® Deck

Operator-Controlled Discharge Chute-OCD

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the ODCD will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Utility Bags

Toro® utility bags for riding mowers are ideal for holding trash, tools, keys, and cell phones. They keep landscaping pros on the go and productive by transporting the essentials they need to get the job done. The lightweight yet durable bags are constructed of heavy-duty mesh fabric to keep contents secure, visible and within reach. They're available in over-the-seat and arm-rest styles and in sizes that match varying machines…and mowing needs.

Z Stand Kit

Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide easy access to the underside of the deck, at the shop or in the field. Just swing the on-board Z-Stand jack out in front of the cutting deck, then drive forward until it locks into place.*

*Standard Z500 Series Z Stand shown.

Heavy Duty Air Cleaner

Deluxe 2-stage air cleaner protects engine from contaminants and prolongs product life. Standard on Z450 PRO Performance and available as an optional upgrade on Z440 PRO Value models.

E-Z Vac Twin Bagger Collection System

Toro® Z Master® E-Z Vac^TM Twin Bagger delivers the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

Optional Blades

In addition to the high sail blade which comes standard on Z Master® Z400 Series mowers, additional 1/4" blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Cool Tops™ Downdraft System

Available exclusively from Toro, the Cool Tops downdraft system is a patented, 12-volt fan that can be mounted to Toro® Z Master® riding mowers equipped with a roll-over protection system (ROPS) - whether old or new. It's designed to promote comfort and productivity by keeping motor heat, insects, and debris off equipment operators. The Cool Tops heavy-duty, S Blade Trimline fan utilizes the power system of a mower's traction unit to deliver an output of 1800 cubic feet per minute (cfm) air flow. The fan's sturdy construction measures 25 inches long by 20.5 inches wide and includes a steel frame, plus a waterproof motor and switch.

Deluxe Rider Cover

Toro's zero turn rider cover helps operators protect their mower - and their investment in it - by shielding the machine from the elements. The all-black cover is made from a 600 Denier polyester fabric that's waterproof as well as abrasion- and tear-resistant. Perfect as an overnight cover for mowers stored outside, it's also ideal for offering longer-term protection during winter storage. The vented design helps promote air movement around the mower to prevent build-up of harmful heat or moisture. The rider cover fits most styles of Z mowers.

DFS Vac Collection System

Quiet and powerful, the Toro DFS Vac collection system is the industry's first and only true vacuum bagger. Featuring a top-rear mounted PTO driven commercial vacuum system, the Toro DFS Vac delivers powerful vacuum suction to rapidly draw debris into the hopper. Add to that a DFS (Dump-From-the-Seat) hopper, and there's no faster way to bag!

Deck-Mounted Grass Catcher

Provides for easy debris handling, and is quick and easy to attach or remove. Great for seasonal clean-up and small jobs, or for general use on Estate Series models.

Deck Lift Assist Kit

Provides foot pedal that allows for the use of leg strength to raise and lower the deck more easily.

Light Kit

*Contains three 37-watt lights that easily mount to the frame of Z400 Series mowers. Wiring quickly connects to the existing 12-volt accessory circuit.*

*Shown on Z590-D Series

Recycler® Mulching Kits

48" and 52" Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging.

Deluxe Suspension Seat

Deluxe suspension seat improves operator comfort and reduces operator fatique when mowing for prolonged periods of time. Provides lumbar support and adjustable suspension, position, arm rests, and seat back angle.

Seat Suspension Kit

Optional seat suspension system enhances operator comfort. Customizable to suit individual operator preferences. A value-priced alternative to the Deluxe Suspension Seat.

Sun Shade

Constructed of a UV- and water-resistant polyester fabric, the sun shade enhances comfort by protecting operators from the sun's rays. For use on 2-post ROPS systems, the shade is designed to fold for transport without the use of tools. Available at participating stocking dealers.

*Shown on Z590-D Series