74254

Heavy Duty Air Cleaner

Deluxe 2-stage air cleaner protects engine from contaminants and prolongs product life.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, at unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

A flat, crisp cut with precision blades.

1/4" thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4", allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up is also significantly reduced.

Convenience and Comfort

Operator controls are conveniently grouped in a single location. Large 1-5/8" diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.

7-gauge, high-strength steel

Constructed of high-strength 7-gauge steel (50,000 psi minimum yield strength), the deck shell is extremely resistant to impacts and abrasion. At a full 5-1/2" deep, the TURBO FORCE deck has more than enough capacity to handle the most demanding conditions.

*Comparison based on 7-gauge high-strength steel versus 10-gauge steel

Rubber Discharge Chute

High performance 5/16" rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides excptional clipping dispersion.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

The industry's toughest spindle assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Tapered roller bearings last up to six times longer than ball bearings.

Comprehensive Warranty*

1 year Limited, 2 year Engine, Hydrostatic & Deck Shell and 3 year Spindle Assembly.**

**3rd year is parts only

Exclusive TURBO FORCE® Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patent-pending adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

E-Z Vac Twin & Triple Bagger Systems

Toro® Z Master® E-Z Vac^TM Twin and Triple Baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

Optional Blades

In addition to the high sail blade which comes standard on Z Master® Z500 Series mowers, additional 1/4" blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahia blades, and low sail sand blades.

E-Z Vac DFS Collection System

Quiet and powerful, the Toro E-Z Vac DFS collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

ZRT Hitch Kit

ZRT hitch kit improves versatility and allows for simple tow-behind applications.

Recycler® Mulching Kits

60" and 72" Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging.

Operator-Controlled Discharge Chute-OCD

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the ODCD will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Deluxe Suspension Seat

Deluxe suspension seat improves operator comfort and reduces operator fatique when mowing for prolonged periods of time.

Striping Kits

60" and 72" striping kits are easily installed and provide a premium "ball park" after-cut appearance.

Toro Z Stand®

Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

FD791-D DFI

Kawasaki FD Series Engines are high-torque, serious professional powerplants featuring overhead valve, V-twin power.

1. Multi-port digital fuel injection
2. Liquid cooled
3. Overhead v-valve
4. 90-degree V-twin
5. Pressurized lubrication
6. Electron spark ignition
7. Compact electronic control unit
8. Choke-free operation
9. Oil pressure switch
10. Water temperature sensor
11. High pressure electric fuel pump
12. Cast iron cylinder liners