|
|
 |
22802-High Torque Auger Power Head
In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo's capability to dig 30" holes up to 5' deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.
|
|
|
|
Product Details
|
-
Designed for large auger bits up to 30"
-
High Torque (Power) Drive
|
|
|
|
| |
- Features
- Accessories
- Specifications
One Person Bit Change
One Person Bit Change
Any of the Toro Augers can be changed on the head with only one person! The 2 9/16" diameter shaft allows easy fitting of the head to the auger. Most other competitors require two people to change an auger. |
Single Directional Pivot
Single Directional Pivot
Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing. |
Horizontal Lockout
Horizontal Lockout
The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more. |
Planetary Gear Drive
Planetary Gear Drive
The planetary gear drive provides maximum torque at a consistent level. The planetary gear drive also insures the longevity of the power head by transmitting less stress to the hydraulic motor. |
6" 9" 12" 15" 18" 24" 30" Augers
6" 9" 12" 15" 18" 24" 30" Augers
Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro augers will not break as easily. The Toro flighting is composed of 3/8" thick continuous steel where many other augers are 1/8" thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components. |
Cement Bowl
Cement Bowl
Haul, mix, and pour up to 200 lbs (dry) cement. Eliminates hand mixing! |
12" & 24" Auger Extension
12" & 24" Auger Extension
Made from the same high strength material as the auger shaft, the extension can be added to increase the depth of the hole. |
9" Rock Auger
9" Rock Auger
Used for extreme digging conditions, such as rock and coral. Replaceable carbide teeth. |
 |
Standard Equipment |
Quick Couplers |
|
|
2- 9/16" round output shaft |
|
|
Dingo Quick-Attach Mount Plate |
|
Pivot Pins |
1" |
|
Motor - Type: |
Eaton 2000 series Gerotor |
|
Displacement |
11.9 cubic inches |
|
Rated Pressure |
3000 psi continuous |
|
Gear Drive - Type: |
Auburn Gear Model 6 Planetary |
|
|
|
|
Hoses |
Two high-pressure hoses |
|
Quick Couplers |
Male & Female Flush Face |
|
Measurements |
Length 24" |
|
|
Width 16" |
|
|
Height 22" |
|
|
Weight 176 lbs. |
|
Bit Speed: |
54 rpm (@11gpm, 95% eff'cy) |
|
Torque: |
1514 ft-lb @3000psi, @11gpm |
|
| |
|
| |
|
| |
|
|
