Commercial Walk-Behind Mower, Floating Deck, Split Lever, Hydro Drive with 48in TURBO FORCE Cutting Unit
Product Information
- Model #: 30488
- Serial #: 313000001 - 313999999
- Product Type: Walk Behind Mowers
Loading...
-
Operator's Manual
-
Engine Evaporative Emission Warranty
-
Setup Instructions
BLADE-ROTARY, 16.5IN LOW FLOW (Part # 107-3193-03)
BLADE-ROTARY, 16.5IN MED FLOW (Part # 107-3194-03)
BLADE-ROTARY, 16.5IN ATOMIC (Part # 107-3195-03)
BLADE-ROTARY, 16.5IN RECYCLING (Part # 107-3196-03)
Bagging Enhancement Kit, Z400 Series Z Master Mowers (Part # 108-4091)
6 PACK-BLADE, HI FLOW - 16.5" (Part # 110-0414)
6 PACK-BLADE-LO FLOW - 16.5" (Part # 110-0415)
6 PACK-BLADE, 16.5" RECYCLER (Part # 110-0416)
6 PACK-BLADE, 16.5" ATOMIC (Part # 110-0417)
6 PACK-BLADE, 16.5" MID-FLOW (Part # 110-0418)
48in Recycler Kit, 2006 and After Mid-Size Mowers (Part # 110-2060)
WEIGHT-CAST (Part # 112-7059-01)
Weight Kit, 2007 and After Commercial Floating-Deck Mid-Size Mowers (Part # 112-9971)
Trim Side Anti-Scalp Roller Kit, 48-inch TURBO FORCE Floating Mower fo (Part # 115-1015)
Discharge Side Anti-Scalp Roller Kit, 48-inch TURBO FORCE Floating Mow (Part # 115-1016)
Operator-Controlled Discharge Chute Kit, Commercial Walk-Behind Mower (Part # 115-4195)
3bu. Soft Bagger, 36" and Larger Mower Decks (Part # 30104)
Tru Trak Sulky (Part # 30110)
-
Model #
30488 -
Serial #
313000001 - 313999999 -
Product Name
Commercial Walk-Behind Mower, Floating Deck, Split Lever, Hydro Drive with 48in TURBO FORCE Cutting Unit -
Product Brand
Toro -
Product Type
Walk Behind Mowers -
Product Series
Mid-Size ProLine Mower -
Chassis Type
Mid-size - Floating Deck -
Swath
48 inch -
Discharge
Side -
Engine/Motor Manufacturer
Kawasaki -
Engine/Motor Size
18.5 hp -
Engine/Motor Type
4 Cycle -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
2wd
-
Drive System: Ground Speed
Fwd. 0 - 6.0 Rev. 0 - 2.5 mph -
Engine: Battery
12V 300CCA -
Engine: Engine Speed
3600±100 RPM -
Engine: Spark Plug
NGK BPR4ES -
Engine: Spark Plug Gap
.030"/ .76mm -
Engine: Ignition Coil Air Gap
.008-.016" / .2-.4mm -
Chassis: Height of Cut Range
1-4.5", 1/4" increments -
Chassis: Tire Pressure
12-14 psi rear -
Engine: Engine Oil Type
67 oz. (2.1 Liter) SAE 10W-30 or 10W-40 -
Drive System: Gearbox Lubricant
HYPR-OIL 500 / 15w-50 Synthetic Motor Oil