• Consistent 40,000 lb of thrust and pullback
  • 5,000 ft-lb of rotation torque
  • Newly designed control system
  • Features next generation drill operating system, TDOS-1

The Toro DD4050 provides the optimal ratio of thrust/pullback and torque performance to footprint – with a width of only 85”, consistent 40,000 lb of thrust and pullback, and 5,000 ft-lb of rotation torque. Additionally, the newly designed drill operating system, TDOS-1, delivers single-screen drill performance information and intuitive navigation to enhance operator productivity.

  • Length
    257" (653 cm)
  • Width
    85" (216 cm)
  • Height
    86.25" (219)
  • Weight
    17,460 lbs (7,920 kg) without drill pipe
  • Engine
    Cummins QSB4.5, liquid-cooled, diesel
  • Gross Power Rating
    160 hp (119 kW)
  • Rated Engine Speed
    2,300 RPM
  • Controls
    Single or dual joystick
  • Injection
    Direct
  • Displacement
    272 cu. in. (4.5 L)
  • Engine Oil Capacity
    11.6 qt (11 L)
  • Fuel Capacity
    67 gallons (254 L)
  • Emissions Compliance
    Tier 4 Final
  • Rotarty Speed (Maximum)
    225 RPM
  • Torque
    5,000 ft-lbs (6,101 N-m)
  • Carriage Travel Speed (Thrust/Pullback)
    150 ft/min (46 m/min)
  • Thrust/Pullback Force
    40,000 lbs (18 Tonnes)
  • Drill Angle Entry
    16 degrees
  • Maximum Ground Travel Speed
    3.25 mph (5.2 km/h)
  • Drill Pipe Length
    10' (305 cm)
  • Drill Pipe Outside Diameter
    2.375" (61 mm)
  • PipeTool Joint Outside Diameter
    2.75" (70 mm)
  • Minimum Bend Radius
    108.2' (33 m)
  • Pipe Carrying Capacity
    520' (159 m) (52 pieces)
  • Maximum Flow
    70 gpm (265 L/min)
  • Maximum Pressure
    1,300 psi (90 Bar)