• Kawasaki 10.8 kW (14.5 hp) petrol engine with 48 V 5400 W brushless generator or 8 Lithium-Ion Samsung® SDI batteries
  • Positive 2WD traction drive or optional 3WD
  • 150 cm Cutting Width
  • Ground Speed – Mowing: 0 to 5 mph; Transport: 0 to 10 mph; Reverse 0 to 3 mph

The new Greensmaster® eTriFlex models carry no hydraulic fluid and utilise all-electric components for traction, steering, lift and cutting. These EnergySmart® models are operationally friendly with noticeable noise reductions, operational cost savings, and other meaningful improvements to complement the ever-important enhancements in cutting performance. Combining the innovative, Double A-Arm Suspension System with industry-leading Flex technology, the cutting units float freely over any terrain. The new Radius Dependent Speed (RDS™) System, in combination with the Lift-In-Turn cutting unit leveling feature virtually eliminates the effect known as “Triplex-Ring”. This substantially improves both the aesthetics and playability of the green. And superior cutting performance is only the beginning. The patented Lift-Gate Footrest, Tool-Free QuickChange™ cutting units, Automatic “Slow-in-Turn” during Transport and Auto-Brake on Operator Dismount are just a few of the many new features that provide added versatility, simplified service, and ultimately, more productivity.

Configuration Options:

  • Greensmaster 3360 All-Electric Engine Generator
  • Greensmaster 3370 All-Electric Battery Powered

DPA Cutting Units

The most advanced cutting unit in the industry:

  • Only two adjustments
  • Superior height-of-cut retention
  • No daily greasing (stainless steel bearings)
  • Consistent cutting edge regardless of reel wear (patented)
  • Smallest bedknife increment adjustments 0.178 mm

Double A-Arm Suspension

The suspension system maintains full floatation range to prevent gouging or scalping when going over undulations.

Proven Flex Suspension (Patented)

Superior contour following capability utilizes an integrated "Flex" linkage system to allow cutting units to pivot around the center of the front roller to master undulations and prevent side-to-side scrubbing of the putting surface.

EdgeSeries™ Reels

Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior aftercut appearance, while reducing maintenance with improved reel edge retention. Learn More.

All-Electric Reel Drive

In addition to eliminating hydraulic leaks, each reel motor has a nominal 1.5 horsepower (1.1 kW) that can increase up to 3.0 hp (2.2 kW) during peak load periods. This translates into the power you need when you need it for unparalleled performance in your most challenging cutting or verticutting applications.

Stored Energy

Eliminates clip marks at startup of mowing path and provides braking power to stop reels from spinning when cutting units are disengaged for safer operation.

Tool-Free, Quick-Change Cutting Units

A single operator can go from cutting Greens at 3.2 mm (1/8") to cutting a Fairway at 19 mm (¾") in just a few minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.

Balloon Style Tyres

Tires have been redesigned to deliver uniform loading across the entire cross-section (load footprint area) to eliminate side wall loading that can create visible tyre tracks.

  • Engine
    Engine: Kawasaki 10.8 kW (14.5 hp), petrol, air-cooled, twin cylinder. Generator: 48 V 5400 W air-cooled brushless permanent magnet motor (3360). Or Eight, Lithium-Ion Samsung® SDI batteries (3370)
  • Fuel Capacity
    18.5 litres petrol (3360) or 10.77 kWh; 48 V nominal (3370)
  • Mowing Speed
    0 to 5 mph
  • Transport Speed
    0 to 10 mph
  • Cutting Width
    150 cm
  • Blade Type
    8-Blade, 11-Blade, or 14-Blade, High carbon steel blades
  • Height of Cut
    Bench HOC range is 1.6 to 7.5 mm. With high HOC kit, range is 7.5 to 25.4 mm
  • Reel Diameter
    12.7 cm EdgeSeries™ Reels
  • Reel Speed
    Adjustable up to 2,050 rpm
  • Steering Controls
    48 V electric steering motor with torque feedback device
  • Tyres
    19x10.50-8, 4-ply rating pneumatic tubeless balloon tyres
  • Warranty Two-year limited warranty, both models. Lithium-Ion battery 4 years.

    For complete product warranty information contact Toro Customer Service

View Larger

Groomers vertically cut into the turf canopy to reduce thatch and stand grass blades for a crisp, clean cut. Select between carbide tipped groomer blade, spring steel groomer blade, or a groomer brush.

View Larger
Light Kit

Three lights - two in front and one in reat - offer more visibility in low light conditions.

View Larger
Greens Cutting Unit Rollers, Scrapers, Bedknives

Toro offers a wide variety of accessories to customise the cutting units to suit your needs and work the best in your conditions.

View Larger
Greens Spiker Kit

An aeration attachment used to relieve soil compaction, control organic matter, and maintain turf health.

View Larger
Greens Tri-Roller Kit

Used to roll greens and smooth surface of turf for an improved after cut appearance.

View Larger
Rotating Rear Roller Brush

Cleans rear roller of grass build-up to prevent leaving clumps on your turf.