• Kawasaki, 726 cc, FX691V Engine
  • 132 cm TURBO FORCE deck
  • Deluxe suspension seat features thick cushions, large bolsters and
    3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue
  • 12 cc unitised pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points

Z Master® Professional 6000 – Kawasaki® 726 cc Engine with 132 cm TURBO FORCE® deck.

View Larger
Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

View Larger
7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

View Larger
Industry’s Toughest Spindle Assemblies

Toro’s rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, 2.5 cm diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.

183 cm Deck will have tapered bearing only.

View Larger
A Flat Crisp Cut with Precision Blades

6.35 mm thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

View Larger
Deluxe Suspension Seat

Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

View Larger
Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

View Larger
Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimise blowout of debris and dust. The bottom, leading edge of the deck is raised 6.35 mm, allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “ploughing” during spring and fall clean-up also is significantly reduced.

View Larger
Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximise discharge velocity.

View Larger
Smooth, Powerful Response

The new unitised pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.

View Larger
Operator Information Center

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

View Larger
Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

View Larger
Convenience and Comfort

Operator controls are conveniently located. Large 4.1 cm diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.

  • Engine
    Kawasaki® 726 cc, FX691V
  • Fuel Capacity
    45 L single-point fill
  • Adjustable Discharge Baffle
    Standard, tools-free
  • Air Filter
    Heavy-Duty Canister Air Cleaner
  • Blade Tip Speed
    5,640 m/min
  • Blade Type
    6.4 mm thick heat-treated steel
  • Carrier Frame
    7.6 cm x 3.8 cm tubular steel
  • Caster Tyres
    13 x 5.00-6 flat-free semi-pneumatic
  • Deck Design
    7-gauge 132 cm TURBO FORCE® with Bull-nose Bumper
  • Discharge Chute
    Rubber
  • Drive System
    Hydraulic Drive System Pump Displacement (12 cc / rev pump)
  • Drive Tyres
    24 x 9.50-12
  • Ground Speed
    0 to 9.9 mph
  • Height of Cut
    25 to 140 mm
  • Hydraulic Fluid
    Premium synthetic
  • ROPS
    Two-position Folding ROPS
  • Seat
    3-D Isolation Seat
  • Spindle Bearings
    Premium Sealed Ball Bearings
  • Spindle Housing
    Cast iron
  • Steering Controls
    4.1cm dia. levers; adjustable
  • Disclaimer
    *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.
View Larger
E-Z Vac™ DFS Collection System

Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

View Larger
E-Z Vac Twin & Triple Bagger Systems

Toro® Z Master® E-Z VacTM Twin and Triple Baggers deliver the convenience and versatility essential to landscape professionals’ productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

View Larger
Light Kit

The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

View Larger
Operator-Controlled Discharge Chute

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

View Larger
Optional Blades

In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 6.35 mm blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

View Larger
Recycler® Mulching Kits

Recycler mulching kits deliver the industry’s finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn’t bag.

View Larger
Roller Striping Kit

Roller striping kit is easily installed and provides a premium “ball park” after-cut appearance.

View Larger
Toro Z Stand

Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

Select your serial number range from the options below to view parts & manuals.

Serial number
314000001-314999999
315000001-315999999
316000001-316999999
400000000-401899999
401900000-403227084
403227085-404319999
404320000-999999999