• 16.6 kW (23 hp) Kubota®, 898 cc, Diesel Engine
  • 132 cm TURBO FORCE Side Discharge Deck
  • TOUGH SPINDLES Cast aluminium sealed spindles survive impacts that would destroy lesser spindles, thanks to a stout cast iron housing and massive base. Toro® Small - Medium Area Mowers Z M
  • TURBO FORCE® DECK Works with the high-torque diesel engine for outstanding results at higher ground speeds.

It’s 7 a.m. The grass is long and wet. And you’ve got five more properties to mow after this one. At times like these, you don’t want a struggle. You need power. Toro’s Professional 7000 Series gives you the torque to take on extreme mowing conditions that would max out a conventional petrol-powered mower. Better yet, it runs on diesel, so you get more power with less fuel than a comparable petrol engine.

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

6.35 mm thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

High-performance Discharge Chute

High performance 8 mm rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides excptional clipping dispersion.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimise blowout of debris and dust. The bottom, leading edge of the deck is raised 6.35 mm, allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “ploughing” during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximise discharge velocity.

Powerful Engines

The Kubota 17.15 kW (23 hp) liquid-cooled diesel engines are geared for high torque while also delivering fast 11.2 mph ground speeds. The powerful, yet fuel-efficient engines come in a compact package that is exceptionally well balanced for low vibration. The liquid-cooled system ensures cleaner combustion and extended engine life.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

  • Engine
    16.6 kW (23 hp) Kubota®, 898 cc, Diesel
  • Fuel Capacity
    Diesel: 45 litres
  • Cutting Width
    132 cm
  • Adjustable Discharge Baffle
    Standard, tool-free
  • Air Filter
    Heavy-duty canister air cleaner
  • Carrier Frame
    5.1 cm x 5.1 cm x 5 mm steel
  • Caster Tyres
    13 x 6.50-6, Flat-free, Semi-Pneumatic
  • Clutch
    Electromagnetic
  • Cooling System
    Liquid-Cooled
  • Deck Design
    TURBO FORCE Side Discharge
  • Discharge Chute
    Rubber
  • Drive System
    Hydraulic 16 cc Hydro-Gear tandem pumps
  • Drive Tyres
    23 x 9.50-12, 4-ply
  • Engine Horsepower
    16,6 kW (23 hp)
  • Front Bumper
    Reinforced bull-nose front bumper
  • Ground Speed
    Diesel 16.6 kW (23 hp) Kubota®, 898 cc, Diesel 16.6 kW (23 hp) Kubota®, 898 cc, Diesel GROUND SPEED 0-11 mph, 0-11 mph
  • Height of Cut
    38 - 127 mm
  • Hydraulic Fluid
    Premium synthetic
  • ROPS
    Folding; standard
  • Seat
    Deluxe Suspension Seat With Armrest;
  • Spindle Housing
    22.9 cm (9") Cast Aluminium
  • Weight
    733 kg
  • Z Stand
    Optional
  • Disclaimer
    *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.
Cool Tops™ Downdraft System

Available exclusively from Toro, the Cool Tops downdraft system is a patented, 12-volt fan that can be mounted to Toro® Z Master® riding mowers equipped with a roll-over protection system (ROPS) - whether old or new. It’s designed to promote comfort and productivity by keeping motor heat, insects, and debris off equipment operators. The Cool Tops heavy-duty, S Blade Trimline fan utilises the power system of a mower’s traction unit to deliver an output of 50.9 cubic metres per minute air flow. The fan’s sturdy construction measures 63.5 cm long by 52 cm wide and includes a steel frame, plus a waterproof motor and switch.

View Larger
Deluxe Rider Cover

Heavy-duty waterproof cover is abrasion- and tear-resistant. Vented design helps minimise heat and moisture build-up.

View Larger
Deluxe Suspension Seat

Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

View Larger
E-Z Vac™ DFS Collection System

Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

View Larger
Optional Blades

In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 6.35 mm blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

View Larger
Operator-Controlled Discharge Chute

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

View Larger
Recycler® Mulching Kits

Recycler mulching kits deliver the industry’s finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn’t bag.

View Larger
Striping Kit

The optional striping kit is easily installed and provides a premium "ball park" after-cut appearance.

Utility Bags

Toro® utility bags for riding mowers are ideal for holding trash, tools, keys, and cell phones. They keep landscaping pros on the go and productive by transporting the essentials they need to get the job done. The lightweight yet durable bags are constructed of heavy-duty mesh fabric to keep contents secure, visible and within reach. They’re available in over-the-seat and armrest styles and in sizes that match varying machines and mowing needs.

Select your serial number range from the options below to view parts & manuals.

72279TE Serial number
410000000-999999999
406400000-409999999
406397919-406399999
400000000-406397918