• Powerful 18.6 kW (25 hp) 1,267 cc Yanmar® Diesel Engine
  • 152 cm Rear Discharge TURBO FORCE® deck
  • Mow smarter with Horizon™ Technology that lets you choose the right operating mode for the conditions, saving fuel costs while maintaining top-level performance
  • Deluxe suspension seat with ISO-mounts to reduce operator fatigue and vibration

Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. Maximum productivity with a rear discharge 152 cm commercial cutting deck. It delivers all the speed and manoeuvrability of a zero-turn, along with the superior quality of cut you expect from Toro.

  • Engine
    18.6 kW (25 hp)* 1267 cc Yanmar® Diesel
  • Fuel Capacity
    Diesel/47.3 litres
  • Cutting Width
    152 cm (Rear Discharge)
  • Air Filter
    Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor
  • Anti-Scalp Wheels
    4 Standard, 2 Side Skids
  • Armrests
  • Blade Tip Speed
    5,550 m/min
  • Blade Type
    3 blades at 52 cm length
  • Caster Tyres
    15 x 6.00-6, Flat-Free, Semi-Pneumatic
  • Clutch
    Wet Disc
  • Deck Design
    7-gauge TURBO FORCE® with bull-nose bumper
  • Drive System
    292 cc (17.84 cu in) Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
  • Drive Tyres
    26 x 12.00-12
  • Engine Horsepower
    18.6 kW (25 hp)
  • Engine Displacement
    1,267 cc
  • Foot Operated
    Height of Cut

    Hydraulic with Rocker Switch
  • Ground Speed
    12.5 mph
  • Height
    ROPS Height (Folded): 129.5 cm; ROPS Height (Upright): 182.4 cm
  • Height of Cut
    2.5 to 14 cm
  • Hour Meter
    Horizon™ Technology
  • Length
    245 cm
  • ROPS
  • Seat
    Deluxe Suspension (Iso-Mount, Flip-Up)
  • Spindle Bearings
  • Spindle Housing
    22.9 cm (9") Diameter Cast Aluminium, 2.5 cm (1") Heavy-Duty Spindle Shaft
  • Steering Controls
    4.1 cm Diameter Grips; Adjustable, Dampened
  • Weight
    888 kg
  • Width
    Deck Clearance Width: 168.4 cm
  • Disclaimer
    * The gross horsepower of these diesel engines was laboratory rated at 3,600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
    **See retailer for warranty details.

Select your serial number range from the options below to view parts & manuals.

72028 Serial number