• 25 HP (18.6 kW) Kubota® engine
  • 87.6 cm width with bucket
  • Turf friendly at only 907 kg
  • Patented, easy-to-use traction control system

Diesel. Done Right.
Our diesel Dingo TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 52.2 L/min and pumping 17.9 kW (24 hp) to the attachments, yet has a ground pressure as low as 0.36 bar (5.2 psi). And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.

4-Pump Hydraulic System

4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Compact Size

Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labour. Plus it provides zero radius turn capability for unmatched manoeuvrability.

Exclusive TX Track Drive

Low centre of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tyre ruts and flat tyres.

Hydraulic Power

Up to 34 L/min at 207 bar hydraulic system gives you incredible hydraulic power to auger up to 76 cm holes or trench 91 cm deep.

Liquid-Cooled Diesel Engine

The 18.6 kW (25 hp) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.

Simple Controls

You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.

  • Engine
    25 HP (18.6 kW) Engine Kubota®
  • Flow
    43.2 L/min
  • Ground Clearance
    11.7 cm
  • Ground Pressure
    0.36 bar (5.2 psi)
  • Ground Speed
    0 to 4.0 mph fwd, 0 to 2 mph rev.
  • Height
    117.1 cm
  • Hinge Pin Height
    167.1 cm
  • Hydraulic System Pressure
    207 bar relief
  • Length
    179.6 cm
  • Loader Arm Flow
    22.7 L/min
  • Loader Hydraulic System
    Joystick control for all funct
  • Operating Capacity
    251 kg
  • Reservoir Capacity
    40 litres
  • Tip Capacity
    716.7 kg
  • Track
    15 cm Kevlar reinforced rubber
  • Traction Flow
    64 L/min
  • Weight
    864 kg
  • Width
    85.6 cm
  • Disclaimer
    *See your local dealer for warranty details.
Aggressive Tread Tracks

Make those difficult job site conditions easier to manoeuvre with this aggressive track option.

Dingo Light Kit

Make night and dark work places, shine.