• 662 L (145 gal) Tank with 6 Diaphragm Pump
  • Ground Drive Proportional Pumping System
  • Compact and Manoeuvrable With Low Turf PSI
  • QuickFind™ Sprayer Operator Console

Earning the market leader position in turf vehicle sprayers comes from listening to what your customers truly want in a sprayer. Toro’s new 662 L (175 gal) dedicated vehicle sprayer is the culmination of hundreds of hours of insightful customer input. This totally new sprayer uses the advanced spray system design of Toro’s extremely successful Multi Pro 5800, 300-gallon sprayer, combined with cutting-edge sprayer controls and productive vehicle features to create the most advanced, efficient and accurate 662 L (175 gal) sprayer on the market. From aggressive agitation, faster response, consistent and accurate application rates, and intuitive rate set up, to precise vehicle control, this sprayer has it all.

Quick Find™ Console

The new Quick Find™ Console feature helps the operator intuitively find boom and actuator switches with the palm of their hand and places command of all key vehicle and sprayer systems at the operator’s fingertips for ease-of-use and improved control. The new Info Centre display and the analogue pressure gauge, which are conveniently located just above the boom section and actuator switches, keeps all key sprayer operation data in the operator’s line of sight.

Chemical Tank

Elliptical tank design prevents chemicals from building up in ‘dead spots’. Square tanks with interior ledges can lead to misapplication or residual chemicals left in the tank after the spray application. The tank incorporates a 40.6 cm side-offset fill well for easy access when loading chemicals. Durable polyethylene material won’t crack, dent, rust, chip or peel. Three, 30-degree, side-mounted, agitation nozzles continuously ‘roll’ the tanks contents. Agitation nozzles are serviceable from outside of the spray tank.

6 Diaphragm Pump

An Industry Exclusive! This unique pump produces up to twice the flow to simultaneously achieve higher spray volumes and aggressive agitation needs. While spraying, the pump continuously agitates tank contents for a homogeneous mix and more accurate application of chemicals from start to finish, saving chemical costs and ensuring efficacy. When engaged, the pump is always on, even when agitation is off. This provides instant pressure, to achieve the desired spray rate, rather than having a delay to spool up the pump.

  • Engine
    Kohler®, CH740 Command series, twin cylinder, air-cooled, 4 cycle, 20.1 kW (27 hp) (gross)
  • Boom System
    5.6 m three section, triangular truss-style open booms
  • Ground Speed
    Forward 0 to 11.5 mph; Reverse 0 to 2.5 mph
  • Height
    2.4 m with booms folded in cradles
  • Length
    4.06 m with booms folded in cradles
  • Nozzle Type
    Triple turret mount, Quick-disconnect with diaphragm check valves.
  • Seat
    Single high back cushion seat standard with manual position adjustment with seatbelts
  • Spray Pump
    Hardi 363/5.5, 6-diaphragm positive displacement with 25 mm input shaft; input speed 300 to 1,150 rpm, Flow rate of 129 L/min @ 2.76 bar (860 rpm).
  • Steering Controls
    Fully hydraulic: steering wheel turns, lock to lock: 3.5
  • Tank Capacity
    662 litres
  • Tyres
    Front: Kenda K404 smooth (treadles); 20x10-10; Rear: Kenda turf tread; 24x13-12
  • Transmission
    3 speed forward, 1 reverse
  • Weight
    998 kg shipping weight
  • Width
    1.78 m with booms folded in cradles
  • Warranty 2 year limited warranty

    For complete product warranty information contact Toro Customer Service

View Larger
66.3 L Fresh Water Rinse Kit

Automatic rinse system is safely and conveniently controlled from the operator seat. Rinse tank nests in front of the main tank, this system includes a separate electric pump, plumbing and dual rinse nozzles. At 22.0 litres per cycle, it has on-board capacity to complete a triple rinse process.

Cleanload Eductor Kit

This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry. Powerful Venturi creates suction to safely and efficiently pull material into the chemical tank. Incorporates a built-in bottle wash nozzle and has an optional suction lance to pull in powdered or liquid products from their container. Stores within the width of the machine.

Electric Hose Reel Kit

45.7 m of hose for hand or walk spraying applications. New 45, 90 & 135 degree swing out base adjustment allows for better hose positioning during spray operations. Hose rewind switch, on/off switch, pressure adjustment switch and pressure gauge are all conveniently located next to the hose reel on the control console for easy operation. Convenient electric powered rewind.

Pro Foam Marking Kit (41232)

New “turn signal” type control conveniently placed on the left side of the steering column provides for fingertip control. Select foam for either boom independently or both simultaneously. Adjust for desired amount of foam with valve on dash.

Ultra Sonic Boom Leveling Kit

New Sonar sensors automatically maintain proper spray height over undulating turf.

Drift Reduction Boom Shroud (41602)

Extends 30.5 cm below the boom to minimise chemical drift in breezy conditions while retaining full boom system functionality.

Spray Nozzles

Full range of contact, systemic and low drift air inclusion nozzles available. Air inclusion nozzles improve accuracy and coverage with more uniform droplets and reduced drift.