Request A Demo

  • No Crushed Cores
  • Higher Productivity
  • Contour Following System
  • Easy and Safe to Operate

From the innovative wheels within the coring path, to the large 48" (122cm) aeration swath, there's nothing ordinary about the ProCore® 648 aerator. Years of research, customer input, testing and attention to detail went into making the ProCore® 648 the most productive and efficient walking aerator on the market.
Learn more about the innovative aerator - ProCore® 648!

Start the Tour >>

View Larger
Toro Titan™ Tines

View the Toro Titan Tines Guide & Catalog

View Larger
Deeper, High Quality Holes

RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result.

View Larger
Ease of Operation

A single switch on the handle controls the tine head and a handle bail engages forward and reverse. No shifting required. A fail safe system stops the machine and lifts the coring head if bail handle is released.

View Larger
Efficient Aeration

The ProCore 648 is more efficient with a 48 inch (121.9cm) aeration swath that is 50 - 100 percent wider than competitive units.

View Larger
High Productivity

The ProCore 648 allows you to aerate more areas in one day with the 48 inch (121.9 cm) aerating swath and clean up is easier and less labor intensive resulting in less time.

View Larger
Innovative Rear Wheel Placement

The wheels are located in front of the aeration head so they do not drive over the freshly aerated turf and run over the cores.

View Larger
Series/Parallel 3-Wheel Drive

The patented 3-wheel series/parallel traction drive, combined with high-torque, low-speed wheel motors, prevents slippage for reliable traction and even hole spacing.

View Larger
Smooth, Quiet, Powerful

To give the ProCore 648 its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.

View Larger
TrueCore™ Ground Following

TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 4" (10.2 cm).

View Larger
Variable Hole Spacing

The ProCore 648 gives you more control with variable hole spacing ranging from 1.5 inches to 3 inches (3.8 cm to 7.6 cm) apart.

  • Aerating Depth
    Up to 4 inches (102 mm)
  • Aerating Width
    48 inches (1.2 m)
  • Engine
    23 hp (17.2 kW) Kohler® gas
  • Ground Speed
    0-3.5 mph (0-5.6 kph) (Forward) / 0.62 to 2.5 hp (1 to 1.9 kw) (Reverse)
  • Height
    45 inches (114.3 cm)
  • Length
    105 inches (266.7 cm)
  • Warranty
    2 year or 500 hour limited**
  • Weight
    1590 lbs. (689 kg) (less fuel)
  • Width
    52 inches (132.1 cm)
View Larger
Rear Roller

Full, rear roller smoothes turf and eliminates tire tracks on cores or freshly aerated turf.

View Larger

Directs cores into neat, narrow rows for easy collection and removal.

View Larger
Tine Holders

Customize your aerator with a choice of five tine holders.

View Larger
Tire Scrapers

Removes any soil accumulation from rear tires.

View Larger
Weight Kit

Up to two additional 60 lb. (28.6 kg) weights can be added to ensure maximum penetration in hard soil.

Documents Type Language
Product Literature ProCore-648-Product-Brochure English PDF
Data Sheet ProCore-648-Sell-Sheet English PDF
Product Literature ProCore-648-Tine-Fit-Chart English PDF
Specifications ProCore-648-Detailed-Specifications English PDF