• 20 HP (14.9 kW) @ 3600 rpm Kohler® Command Series CH20
  • 2-Pump System
  • 2 Ground Speeds
  • Compact Size

The Toro Dingo 220 provides excptional value. Packed with 3000 psi (206.7 bar) and 14.8 gpm (56 lpm) of hydraulic power, the Dingo 220 is built with a 20hp (14.9 kw) Kohler engine to save you time and money in the long run, and excellent power for enhanced performance.

Compact Size & Maneuverability

Get the Dingo into tight spaces where only hand labor could go before. Add to the easy spin steer turning, and you'll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labor.

Fingertip Controls

Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips.

Hydraulic Power

Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30" (76 cm) holes or trench 36" (91 cm) deep.

2-Pump Hydraulic System

Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 10.8 gpm (37.9 lpm) and a low flow of 4 gpm (15.1 lpm). This provides better usage of power to get the job done as well as not relying on one pump for shared power!

Quick Attach System™

Each attachment is equipped with Toro's unique Quick Attach System™. The Dingo QAS makes changing attachments as simple as turning 2 levers. Each attachment is designed to be installed in less than 1 minute. (One exception - the backhoe takes 2 minutes.)

2 Ground Speeds

Operator can select low or high speed ground speed. Low speed directs more hydraulic power to the attachment and high speed directs more power to the wheels. The low speed option also helps new operators shorten their learning curve.

  • Air Filter
    High-capacity, paper type w/pre-cleaner
  • Controls
    Key, throttle, choke
  • Cooling System
    Air Cooled
  • Engine
    20 HP (14.9 kW) @ 3600 rpm Kohler® Command Series CH20
  • Ground Clearance
    5.8" (15 cm) front & rear
  • Ground Speed
    0-3.7 mph (0-6 km/h) / 0-3.7 mph (0-6 km/h)
  • Height
    Overall Height - 48.7" (123.7 cm), Max Operating Height - 91.2" (231.6 cm)
  • High Flow Pump
    10.8 gpm (40.9 lpm)
  • Hinge Pin Height
    66" (167.6 cm)
  • Hydraulic Reservoir Cap.
    14.8 gallons (56 liter)
  • Hydraulic System Pressure
    3,250 PSI
  • Length
    82.2" (208.8 cm) w/bucket; 62" (157.5 cm) w/o bucket
  • Loader Hydraulic System
    2 control levers- push/ pull
  • Low Flow Pump
    4 gpm (15.1 lpm)
  • Reservoir Capacity
    14.8 gallons (56 liter)
  • Steering Controls
    Zero turning type w/ 2 levers
  • Tip Capacity
    1,030 lbs (467.2 kg) w/ 200lb (90.7 kg) operator
  • Warranty
    Product - One Year* / Engine - Two Year*
  • Weight
    1,430 lbs (649 kg)
  • Width
    40.5" (102.9 cm) std tires, 35" (88.9 cm) narrow
  • Disclaimer
    *See your local dealer for warranty details.
Compact Utility Loader Attachments

From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks.
See them all here:

Documents Type Language
Dingo Brochure