Request A Demo

  • Lithium-Ion battery pack – nominal 50.4-Volt 26.7 A-Hr (42 – 56 volt, 1.345 kW-hr)
  • Permanent Magnet DC motor directly coupled to a fully gear-driven transmission with integral traction differential and traction disconnect to ease movement during service/maintenance operations.
  • 21" (53cm) Cutting Width
  • Ground Speed - Mowing speed: 2.0-3.5 mph (3.2-5.6 km/h). Transport speed (maximum): 5.3 mph (8.5 km/h).

Extremely quiet, the all-electric Toro® Greensmaster e1021 and eFlex1021 are among the quietest and most efficient walk greensmowers on the market today. Harnessing the power of lithium-ion battery technology, these mowers take electrical efficiency to a new level, allowing operators to mow up to 35,000 sq. ft. of turf on a single charge. Additionally, a convenient LCD screen indicates an ongoing battery charge status and also displays useful information such as machine hours, diagnostics, and overall battery health. These units are designed for minimal maintenace and long, productive life saving labor and operational costs.

Choose from 2 models, the Greensmaster eFlex 1021 with patented Flex suspension technology. Or the Greensmaster e1021 Fixed-head mower. Each with 21" (53cm) cutting widths.

Models:

  • Greensmaster® eFlex 1021
  • Greensmaster® e1021 Fixed-head

Patented Flex Suspension Technology

Flex suspension allows the cutting unit to easily follow the contours of the green and delivers a superior quality of cut. (eFlex 1021 only)

Proven Lithium-Ion Technology

Battery capacity with ample power and run time to mow up to 35,000 sq-ft (over 3000 sq-meters). Balanced battery management and on-board electronics monitor the mower to automatically optimize battery life.

Tool-free Cutting Unit Removal

Changing cutting units is simple with the tool-free quick-change levers. Easily swap out cutting units in seconds and minimize maintenance downtime. (eFlex 1021 only)

EdgeSeries™ Reels

Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention. Learn More.

Easy-Reach Adjustable Throttle

All operator controls are within easy reach to perfect the mowing process, improve cut consistency, and enhance control – in normal and tight turn-around situations.

Telescoping Handle

Engineered to accommodate operators of different heights, for mowing in a natural upright position. Leads to less fatigue and a superior cut. Adjustable to 5 distinct handle positions.

Handle Isolation Mounts

Two rubber grommets eliminate minor oscillations in Height-of-Cut caused by walking strides. Delivers a consistent cutting height on each and every green for optimal playability.

Reel Engagement Lever

Convenient, easy to reach location to engage reel from the operator position.

Durable Gear Drive Transmission

Provides long life and best-in-class transmission durability. Lubricated for life, no grease points.

Dual Function Bail

A single bail combines safety and ease-of-operation. Convenient operation allows the mower to slow down or come to a full stop during turn-arounds without disengaging traction to line up for next mowing pass. Also ideal when using turn-around mats to preserve collar health.

High/Low Clip Rate Knob

Clip frequency can easily be changed in the field to mow the perimeter, collars etc. The quick-change feature also can be locked out for added control.

Traction Release Lever

Disengage the traction with a simple lever twist. Getting around the shop has never been easier!

  • Power
    Lithium-Ion battery pack – nominal 50.4-Volt 26.7 A-Hr (42 – 56 volt, 1.345 kW-hr) with integrated battery management system utilizing CAN communication with the machine controller and charger. Single battery affixed to unit and charged onboard. Brushless permanent magnet DC motor with integral motor controller and helical gear reduction.
  • Mowing Speed
    2.0 to 3.5 mph (3.2 to 5.6 km/h)
  • Cutting Width
    21" (53cm)
  • Height of Cut
    (eFlex) For Greens: (Spacer Position One) 0.062" to 0.250" (1.5 mm to 6 mm) For Tees: (Spacer Position Two) 0.125" to 0.375" (3 mm to 9 mm) High Height of Cut Kit: 0.375 to 1.00" (9 mm to 25 mm)
  • Number of Blades
    11-blade and 14-blade cutting units available (8-blade available on e1021)
  • Drive System
    (e1021) Dual position traction drum with positions for contour following or forward weight bias at higher heights of cut. (eFlex) Tapered traction drum for improved after cut appearance.
  • Certification
    Designed in accordance to ANSI/CE/WEEE/ROHS/C-TICK.
  • Weight
    (e1021) 240 lbs. (109 kg) or (eFlex) 292 lbs. (132.5 kg)
  • Warranty Four-year warranty on Lithium-Ion Battery. Refer to the Operator’s Manual for further details.

    For complete product warranty information contact Toro Customer Service

Documents Type Language
Data Sheet Greensmaster e1021 Sell Sheet English PDF
Data Sheet Greensmaster eFlex 1021 Sell Sheet English PDF

Select your serial number range from the options below to view parts & manuals.

04861 Serial #
408000000-999999999
400000000-407999999
04831 Serial #
408000000-999999999
400000000-407999999