• Available in 1" (2.5 cm) inlet (835S) and 1 1/2" (3.8 cm) inlet (855S)
  • TruJectory™ Adjustment of the main nozzle—24 positions from 7°-30°
  • Arc Adjustment—40–330° and true full-circle in one
  • The Industries Largest and Most Flexible Nozzle Selection

The 835S/855S Series sprinklers with TruJectory™. You know that bunker that’s always getting wet? Or that tree branch that’s always in the way? Now you can address trouble spots with Toro’s patented TruJectory feature. Simply adjust the trajectory of the spray from 7 to 30 degrees and get better head-to-head coverage. Plus there’s part- and full circle operation in one sprinkler.

View Larger
TruJectory™ Adjustment of the main nozzle—24 positions from 7°-30°

From 7-30 degrees this patented feature in 1 degree increments puts water where you want it for maximum distribution uniformity. Adjust from the top of the sprinkler in seconds, wet or dry. This flexibility lets you tackle every obstacle on the course; wind, trees, bunkers, mounds and more.

View Larger
Arc adjustment—40°-330° and true full-circle in one

One sprinkler for every location on the course. These unique sprinklers can be a full circle today and a part circle tomorrow, allowing you to simply and economically adjust the area of coverage to match your seasonal needs or meet water rationing mandates in seconds with no disassembly or additional parts required.

View Larger
The Industries Largest and Most Flexible Nozzle Selection

With the industries largest selection of nozzles Toro sprinklers allow you to put the precise amount of water exactly where you need it.

View Larger
Spike-Guard™ Solenoid

With its 20,000 volt lightning rating, the industries highest, the Spike Guard™ solenoid has virtually eliminated the need for solenoid replacement in high lightning environments. And with 1/2 the amperage draw of traditional solenoids you can run twice as many sprinklers simultaneously, reduce the cost of wiring during initial installation or increase the distance from controller to sprinkler.

View Larger
Indestructible Stainless Steel Valve Seat

Never gets damaged; never requires replacement; lower cost of ownership

View Larger
Slow closing piston valve eliminates pressure surges

Slow closing piston valve eliminates the high pressure surges that can damage the sprinkler, valves and piping systems.

View Larger
Selectable pilot valve

Allows pressure regulation adjustment at the sprinkler to 50, 65, 80 or 100 psi (3.4, 4.5, 5.5 or 6.9 bar).

View Larger
Removable rock screen

Allows you to flush debris out of the piping system from the top of the sprinkler

View Larger
Check Valve Standard

Prevents low head drainage, puddling and soil erosion

View Larger
Effluent Water Models Available

Models are available with lavender marking to identify the use of non-potable water.

View Larger
Ratcheting Riser

For fine-tuning arc adjustment after installation.

View Larger
Back Nozzle Capable

Allows watering directly behind a part circle sprinkler

View Larger
Electric Valve-In-Head Solenoid-835/855

Electric Valve-in-head solenoid 24V ac, 50/60 Hz

  • Radius
    42'-100' (12.8 - 30.5 m)
  • Flow
    7.1-61.1 GPM (27 - 231 LPM)
  • Precipitation Rate
    835S: Min = .37"/hr (.9 cm); Max = .53"/hr (1.3 cm) 855S: Min = .43"/hr (1.1 cm); Max = .60"/hr (1.5 cm)
  • Trajectory
  • Arc
    Full Circle; Part-circle Adjustable; Part/Full circle in One - 40°-330° and 360°
  • Recommended Operating Pressure
    65-100 PSI (4.5 - 6.9 BAR)
  • Maximum Operating Pressure
    150 PSI (10.3 cm)
  • Minimum Operating Pressure
    40 PSI (2.8 BAR)
  • Inrush
    60 Hz, 0.12 Amps
  • Holding
    60 Hz, 0.10 Amps
  • Inlet
    1" (2.5 cm) and 1 1/2" (3.8 cm) NPT, BSP, Acme
  • Pop-Up Height
    3 1/4" (8.3 cm)
  • Body Height
    835S: 10" (25.4 cm); 855S: 11 3/8" (28.9 cm)
  • Body Diameter
    835S: 6 1/2" (16.5); 855S: 7 1/2" (19.1 cm)
  • Weight
    835S: 2.98 lbs. (1.4 kg); 855S: 3.70 lbs. (1.7 kg)