• Industry's Largest Nozzle Selection
  • Five Activation types
  • Constant Velocity Full Circle Drive
  • Radius Reduction Screw for Fine Tuning

The New INFINITY 34/54 is Toro’s Premium full-circle golf sprinkler series with SMART ACCESS™. The dual trajectory main nozzle provides exceptional nozzle performance at the 25° standard angle position and great performance in windy applications at the 15° low angle position. And the consistency of the constant velocity full circle drive ensures even water application across the coverage area every time you water.

View Larger
The Industries Largest and Most Flexible Nozzle Selection

With the industries largest selection of nozzles Toro sprinklers allow you to put the precise amount of water exactly where you need it.

View Larger
Indestructible Stainless Steel Valve Seat

Never gets damaged; never requires replacement; lower cost of ownership

View Larger
Future-Proof Your Investment

Compartment provides room to grow. Whatever the future holds, this sprinkler will be ready. Getting smarter without digging!

View Larger
GDC 2-wire module

accessible from the top Allows for GDC module retrieval, system troubleshooting and system repairs without digging!

Nozzle Base Clutching

Hot spot watering has never been easier, simply turn in either direction, hold and shoot to put down as much water as needed, exactly where you want it. Standard on all part circle models.

View Larger
Wire splices protected and accessible from the top

The protective enclosure isolates wire splices from the soil and potential shorts to ground. Provides access for system troubleshooting and repairs without digging!

View Larger
Pilot Valve Accessible

Toro’s patented CHECK FLOW™ feature facilitates troubleshooting, pressure adjustments, solenoid and pilot valve servicing without turning the water off or digging!

  • Radius
    INF34: 52' - 91'
    INF54: 52' - 99'
  • Flow
    INF34: 13.0 - 46.9 GPM
    INF54: 13.2 - 61.8 GPM
  • Precipitation Rate
    INF34: Min = .33"/hr; Max = .55"/hr
    INF54: Min = .33"/hr; Max = .61"/hr
  • Trajectory
    25° & 15°
  • Arc
    Full Circle
  • Recommended Operating Pressure
    65-100 PSI
  • Maximum Operating Pressure
    150 PSI
  • Minimum Operating Pressure
    40 PSI
  • Inrush
    60 Hz, 0.12 Amps
  • Holding
    60 Hz, 0.10 Amps
  • Inlet
    INF34: 1" Acme
    INF54: 1 1/2" Acme
  • Pop-Up Height
    3 1/4"
  • Body Height
    INF34: 10"
    INF54: 11 3/8"
  • Body Diameter
    SMART ACCESS cover and compartment
    INF34: 7 5/8"
    INF54: 7 5/8"
  • Weight
    INF34: 4.22 lbs.
    INF54: 5.04 lbs.