• Industry's Largest Nozzle Selection
  • Hot Spot Watering
  • Adjustment With No Disassembly
  • True Part and Full-Circle in One – (40° - 330° part circle)

With the industry’s largest selection of high performance nozzles and Trujectory™ adjustment the New INFINTY 35-6/55-6 Series with SMART ACCESS™ allows you to put water precisely where you want it for maximum distribution uniformity. And the part/full circle drive allows you to simply and economically adjust the area of coverage to match your seasonal watering needs or meet water rationing mandates in seconds with no disassembly or additional parts required.

View Larger
TruJectory™ Adjustment of the main nozzle—24 positions from 7°-30°

From 7-30 degrees this patented feature in 1 degree increments puts water where you want it for maximum distribution uniformity. Adjust from the top of the sprinkler in seconds, wet or dry. This flexibility lets you tackle every obstacle on the course; wind, trees, bunkers, mounds and more.

View Larger
The Industries Largest and Most Flexible Nozzle Selection

With the industries largest selection of nozzles Toro sprinklers allow you to put the precise amount of water exactly where you need it.

View Larger
Indestructible Stainless Steel Valve Seat

Never gets damaged; never requires replacement; lower cost of ownership

View Larger
Ratcheting Riser

For fine-tuning arc adjustment after installation.

View Larger
Future-Proof Your Investment

Compartment provides room to grow. Whatever the future holds, this sprinkler will be ready. Getting smarter without digging!

View Larger
GDC 2-wire module

accessible from the top Allows for GDC module retrieval, system troubleshooting and system repairs without digging!

Nozzle Base Clutching

Hot spot watering has never been easier, simply turn in either direction, hold and shoot to put down as much water as needed, exactly where you want it. Standard on all part circle models.

View Larger
Pilot Valve Accessible

Toro’s patented CHECK FLOW™ feature facilitates troubleshooting, pressure adjustments, solenoid and pilot valve servicing without turning the water off or digging!

View Larger
Wire splices protected and accessible from the top

The protective enclosure isolates wire splices from the soil and potential shorts to ground. Provides access for system troubleshooting and repairs without digging!

  • Radius
    INF35-6: 42' - 92'
    INF55-6: 52' - 100'
  • Flow
    INF35-6: 7.1 - 45.3 GPM
    INF55-6: 13.9 - 61.1 GPM
  • Precipitation Rate
    INF35-6: Min = .37"/hr; Max = .53"/hr
    INF55-6: Min = .43"/hr; Max = .60"/hr
  • Trajectory
    24 position from 7° - 30° in 1° increments
  • Recommended Operating Pressure
    65-100 PSI (4.5 - 6.9 BAR)
  • Maximum Operating Pressure
    150 PSI (10.3 cm)
  • Minimum Operating Pressure
    40 PSI (2.8 BAR)
  • Inrush
    60 Hz, 0.12 Amps
  • Holding
    60 Hz, 0.10 Amps
  • Inlet
    1" (2.5 cm) and 1 1/2" (3.8 cm) NPT, BSP, Acme
  • Pop-Up Height
    3 1/4" INF55-6; 5.13 lbs
  • Body Height
    INF35-6: 10"
    INF55-6: 11 3/8"
  • Weight
    INF35-6: 4.31 lbs
    INF55-6; 5.13 lbs
  • Cap Diameter
    SMART ACCESS cover and compartment
    INF35-6: 7 5/8
    INF55-6: 7 5/8