MSRP: 11,999.00 USD

  • The digital display gauge features 14 critical operation information indicators
  • The shift lever is strategically located on the dash for added convenience, and it integrates a park gear for parking on steeper grades
  • This 2-in-1 cargo box converts to a flatbed in minutes and can handle up to 1,500 lbs. of total payload.
  • Over 40 different accessories available to customize for your needs

Go farther, haul more, and redefine the way you work with the new Toro side by side off-road utility vehicle. Meet the demands of any job with the 700 EFI model and choose from over 40 accessories to match your year-round project needs, increase your productivity and get valuable time back.

View Larger
Convert From Cargo Box To Flat Bed

Carry anything, anywhere. The convertible cargo box features 600-1,000 lbs. of cargo capacity and sides that remove in minutes to create a flatbed for hauling materials of all shapes and sizes.

View Larger
Standard Front Bursh Guard and 2" Receiver

There is no limit to the terrain you a standard front brush guard and 2" receivers in the front and rear, you are ready for any job, anywhere.

View Larger
10" of Suspension Travel

No matter how demanding the job site, utilize the adjustable CAM style shocks to maximize the full 10" of travel and 10" of ground clearance in your suspension to conquer every obstacle in your workday.

View Larger
Digital Display

The digital gauge features 14 critical operation information indicators: clock/hour meter, fuel level, mode button, set/reset button, odometer/trip, gear position, speedometer/tachometer, needle display, differential lock, high beam, temperature and oil pressure.

View Larger
Integrated Parking Brake

The shift lever is strategically located on the dash for added convenience, and it integrates a park gear for parking on steeper grades.

View Larger
Convertible Dumping Cargo Box

The 2-in-1 cargo box can be converted to a flatbed and features manual dumping for hauling and material placement.

  • Engine
    SOHC 46 hp 4-Stroke, 4 Valve with EFI
  • Displacement
    695cc
  • Cooling System
    Liquid with fan
  • Alternator Capacity
    28 Amps
  • Speedometer / Odometer
    Digital
  • Fuel Capacity
    8.2 gallons
  • Ground Speed
    Up to 55 mph
  • Transmission
    Automatic CVT with EBS, Hi/Lo Range, Reverse and Park
  • Drive System
    2/4 WD + Electric Front Differential Lock
  • Brake System
    Hydraulic Disc
  • Frame Suspension
    Double A-Arm
  • Front / Rear Travel
    10"
  • Tires
    Front Tires - 26" x 9" - 14
    Rear Tires - 26" x 11" - 14
  • Wheels
    Aluminum
  • Dimensions
    129" (L) x 60" (W) x 79" (H)
  • Wheelbase
    85"
  • Ground Clearance
    10"
  • Weight
    1363 lbs.
  • Payload Capacity
    1500 lbs.
  • Towing Capacity
    1500 lbs.
View Larger
3,000 LB Winch

The 3,000 lb. winch is designed and engineered by the experts at WARN® for pulling power you can depend on. The winch kit includes 50 ft. of durable wire cable and feature custom-fit harnesses and connections. The powerful permanent magnet motor provides 3,000 lbs. of pulling capacity. A continuously backlit illuminated rock switch makes night use and plowing easy. The all metal gear end house and mechanical brake ensure optimal operation. The winch's plow roller fairlead has a large diameter bottom roller to reduce rope stress when plowing.

Fits Models 500 EFI & 700 EFI.

View Larger
4-Season Tracks Clutch

Includes clutch rollers and spacer for Tiger Trax2 application.

Fits Models 500 EFI & 700 EFI.

View Larger
9-LED-5 Watt 1-Row Light Bar

Light your trail and stay visible with this powerful 5-watt, one row, nine LED light bar with 4,437 lumens output. The combination lens pattern optimizes peripheral floor and spot performance. Electronic thermal management and advanced 90% optically pure optics optimize light performance. Made with 6061 aluminum bezel and housing and IP-68 rating for extreme performance in all conditions. The kit includes the custom wire harness with high-end weatherproof connectors and backlit switch for quick and painless installation. Multi-voltage electronics provide an input voltage of 9-32 volts. Foot-style mounting hardware is included.

Fits Models 500 EFI & 700 EFI.

View Larger
Baja Light Bar

Mount the Baja light bar directly to the ROPS of give your LXC roof a custom look to attach the Firebar 9-LED Light Kit. To attached to ROPS, use four Fast Clamps (sold separately).

Fits 500 EFI & 700 EFI; ROPs or LXC Roof Kit.

View Larger
Box Enclosure

Sturdy aluminum framework and canvas construction easily mounts to the rear cargo box. Front and rear see-through windows with zippered rear access. Lays down when not in use.

Fits Models 500 EFI & 700 EFI.

View Larger
Cab Heater

Space-saving, under hood-mounted heat unit. High-output, dual-speed fan and two-directional outlets in splash panel keep feet warm. Fog-free windshield from dash-mount defroster. Comes complete with installation kit and instructions. Note: Requires Front Under Hood Storage Box.

Fits Models 500 EFI & 700 EFI.

View Larger
Fast Clamp

Embedded threads allow mounting of lights, GPS brackets etc. to ROPS. Quick-release capability. Attaches to any 1 1/2" or 1 3/4" tube. High-strength nylon construction. Zinc-coated hardware for resistance to corrosion.

Sold individually.

View Larger
Front Bumper

The heavy-duty front bumper offers contoured fit for protection of the grill, hood, and headlights. It mounts directly to the frame and pivots for under hood access.

Fits Models 500 EFI & 700 EFI.

View Larger
Front Under Hood Storage Box

Carry and protect items with sturdy storage box. Installs under hood. Required for Cab Heater Kit and Wiper Kit.

View Larger
Hitch

A top accessory for every UTV owner, the receiver hitch is design for 2-in x 2-in receivers and 1-in shank balls. It features rugged, rust-resistant, highgloss powdered-coated finish for long durability. Pin and clip are included.

View Larger
Hitch Ball - 1 7/8"

Chrome plated with 1-in shank. Requires receiver hitch.

View Larger
Hitch Ball - 2"

Chrome plated with 1-in shank. Requires receiver hitch.

View Larger
Low Windshield

Aerodynamic styling diverts wind up and over operator and passenger. Scratch- and abrasion-resistant Makrolon® AR polycarbonate construction.

Fits Models 500 EFI & 700 EFI.

View Larger
LXC Cab

The LXC cab features an excellent fit, perfect for keeping the elements out in any climate with plenty of noise reduction and ventilation. The lightweight, spacious cab is easy to install and features a sliding window in the doors, plus a rear tip-out window. The kit includes roof, windshield, rear panels, and doors.

Fits Models 500 EFI & 700 EFI.

View Larger
LXC Door (pair)

Lightweight molded HDPE provides protection against elements. Lockable door system and frame created an automotive look. HDPE absorbs noise, providing better acoustics. Up and down sliding scratchresistant polycarbonate window provides ample ventilation. Finished interior with armrest.

Fits LXC Cabs.

View Larger
LXC Rear Panel

Smoked polycarbonate panel is molded for strength and lightness and provides optimal visibility. Tip-out window provides ventilation. Lightweight and easy to handle. Resistant to shocks that may come from the rear box. Rear panel is composed of steel and features a sliding glass window.

Fits LXC Cabs.

View Larger
LXC Roof/Headliner

Constructed entirely of twin-sheet thermoformed HDPE with integrated, tinted sunroof and finished interior. Provides protection against wind, rain, cold and sand. Highly impactresistant and lightweight sunroof. Stereo Kit may be installed in the interior of the LXC Roof.

Fits LXC Cabs.

View Larger
LXC Windshield

Laminated glass, easy-opening assist with gas springs. Protection against wind, rain, cold and sand with excellent visibility. Provides ventilation inside when the panel is open. Three positions: completely closed, partially open and fully open. Works with Windshield Wiper Kit. Windshield Only.

Fits LXC Cabs.

View Larger
Mounting Brackets for Tiger Trax

Mounting Brackets for Tiger Trax

Fits Models 500 EFI & 700 EFI.

View Larger
Nerf Bars

Slip-resistant step for easy access to your Toro UTV. Strong, heavy-duty, powder-coated steel with solid four point attachment.

Fits Models 500 EFI & 700 EFI.

View Larger
Oil Cooler

Provides additional engine oil cooling in extremely high temperatures. Recommended for heavy-pulling, heavy load conditions or extended high-speed operation. Includes oil cooler, oil tower, filter, hoses and mounting brackets.

Fits Models 500 EFI & 700 EFI.

View Larger
Quick Attach Tiger Trax Extension

Provides appropriate blade clearance when Tiger Trax Kit is installed.

Required for plow use with Tiger Trax Kit.

View Larger
Rear Bumper

Heavy-duty, powder-coated tubular steel construction. Mounts to rear of box frame to protect the box and tailgate areas. Allows bed to dump.

Fits Models 500 EFI & 700 EFI.

View Larger
Rear Storage Box

Carry and protect items with sturdy storage box. Installs under rear cargo box. Left hand and right hand storage boxes sold separately. (132-3160 (LH) 132-3159 (RH))

View Larger
Rear View Mirror

Easily mounts to production holes in front canopy tube. 4-in x 11-in size gives a nice, widerear view.

Fits Models 500 EFI & 700 EFI.

View Larger
Side-View Mirrors LH, RH

5-in x 6 1/2-in adjustable mirror head provides superior visibility. Bracket and hardware included. Left hand and right hand sold separately. Model numbers: 132-3134 (LH) //132-3135 (RH)

Fits Models 500 EFI & 700 EFI.

View Larger
Snow Plow

Designed and engineered specifically for 500 & 700 EFI. Includes blade, frame and mount. Attaches/detaches in less than 10 seconds. Wide, 72-in. two-way tapered blade design throws snow farther in either direction. 16-in. center height with blade ends tapering out to 22 in. Five adjustable plow positions for increased versatility. Durable, heavy duty steel construction. Standard Snow Deflectors and Edge Markers for increased snow handling.

Requires 3,000-lb. Winch Kit to lift.

View Larger
Stereo Kit

Developed for installation in an LXC Roof Kit. Includes Jensen radio, two 6.5" and two 5.25". JBL speakers, antenna and custom wiring.

View Larger
Switch Mount Panel

Includes switch panel and two plugs for installing added accessories.

View Larger
Tiger Trax

The custom fit Tiger Trax are optimized for Toro UTVs and give you the edge in deep snow, sand, swamps, and the roughest terrain. With excellent flotation, increased ground clearance, optimized frame geometry, aggressive track design, and significant ground traction, these tracks are the top terraincapable all-season track system available. NOTE: Requires Track Kit, Mount Kit & Clutch Kit, sold separately.

Fits Model 700 EFI.

View Larger
VXC 2-Piece Roof

Designed for use with polycarbonate windshields. Durable polyethylene construction. Bold Styling and textured surface resist scratching. Innovative two-piece design shields out the elements.

Fits VXC Cabs.

View Larger
VXC Cab

The VXC cab is made with lightweight polycarbonate and thermoplastic olefin components. The cab kit includes two-piece roof, rear panel, and doors. Note: VXC cab components are not designed to work with LXC cab components. Windshield sold separately. – choose from VXC Glass, Tip-Out, Vented, or Full.

Fits Models 500 EFI & 700 EFI.

View Larger
VXC Door (pair)

TPO formed A-pillar provides a perfect watertight fit. Metal sub frame backs up the A-pillar and provides a sturdy mount for door hinges. Doors can be removed without tools, delivering the ultimate in convenience. TPO with textured finish hides scratches and provides a stylish, low profile appearance. Windows do not open.

Fits VXC Cabs.

View Larger
VXC Glass Windshield

Fixed laminate glass with steel frame. Dual upper vents or added airflow. Works with Windshield Wiper Kit.

Fits VXC Cabs.

View Larger
VXC Rear Panel

Dust swirl is significantly reduced with a roof and windshield installed.

Fits VXC Cabs.

View Larger
VXC Tip-out Windshield

Scratch resistant/hard-coated polycarbonate, Durable nylon mounting brackets. Exclusive vented design. Convertible design allows use as half- or full-height, vented windshield.

Fits VXC Cabs.

View Larger
VXC Vented Windshield

Dual adjustable vents for added airflow. Scratch- and abrasion-resistant Makrolon® AR polycarbonate construction.

Fits VXC Cabs.

View Larger
Winch Synthetic Rope

Maximizes winch efficiency. Excellent for lifting plows. Includes easy-handling synthetic rope, burly rock guard sleeve and roller fairlead. 50 ft. long, 3/16 in. thick.

Use with Aluminum Drum 3000-lb. Winch.

View Larger
Windshield Washer Fluid Kit

Tank holds just over a half-gallon of fluid. Works with Wiper Kit.

Requires Front Under Hood Storage Kit.

View Larger
Windshield Wiper

180 degrees of rotation clears both driver and passenger. Kit includes wiper, motor, custom wiring harness and switch.

Fits LXC & VXC Glass Windshields.

View Larger
Windshield Wiper - Manual

8"-12" adjustable arm length; 11" wiper blade length. Note: Polycarbonate windshields have a scratch-resistant coating. Caution should be taken when wiping mud or abrasive material off windshield as it will affect the coating over time.

Fits glass and polycarbonate windshields.

View Larger
Worksite Tire

26-in x 9-14-in Kenda Tire. Specific radial design for UTV/ATV off-road applications. Unique, extended-wear tread pattern. Approved E Mark for European standards.

Fits Models 500 EFI & 700 EFI.