5000 Series 60" Zero Turn Mower | 25.5 HP 852cc | 72910

NEW

5000 Series 60" (152 cm) 25.5 HP 852cc (72910)

Highlights

Professional Performance - With the 25.5 HP Kawasaki FX 852cc engine.
60" TURBO FORCE® Cutting Deck - Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.
Superior Fuel Economy - Up to 25% better fuel economy than equivalent carbureted engines.
High-Strength Blades - Super fast 18,300+ ft./min blade tip speed, high-lift, flex-resistant 1/4" thick heat-treated steel blades.

When you cover a lot of ground, you need a machine that keeps up. With a tough 25.5 hp Kawasaki® FX801 852cc engine, 60" (152.4 cm) TURBO FORCE deck and a deluxe, handcrafted seat, Toro’s Z Master® 5000 packs the power and comfort you demand.

Features

Deluxe Handcrafted Seat with Arm Rests

Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Rugged Frame

A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminum Spindle

Cools quickly for enhanced durability and performance.

Specifications

Engine
25.5 HP* Kawasaki FX 852cc
Fuel Capacity
Gas/12 gal (45.4 L)
Adjustable Discharge Baffle
Standard
Air Filter
Heavy-Duty Canister
Anti-Scalp Wheels
4 Standard, 1 Optional
Blade Tip Speed
18,300+ ft/min (5,577.8 m/mim)
Blade Type
.25 in (.6 cm) thick heat-treated steel
Carrier Frame
3" x 1.5" x 10 gauge
Caster Tires
13 in x 6.5 in - 6 in (33 cm x 16.5 cm -15.2 cm) flat-free semi-pneumatic
Deck Design
80-Grade 7-gauge 60 in (152 cm) TURBO FORCE® w/bull-nose bumper
Discharge Chute
Rubber
Drive Tires
24" x 12" - 12"
Ground Speed
10 mph forward
Height of Cut
1.0" -5.5" in 0.25" increments
Hour Meter
Standard
Hydraulic Fluid
Premium synthetic
Ignition
Electric Start, Standard
ROPS
Folding; standard
Seat
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Bearings
Greaseless ball bearings
Spindle Housing
9" (22.9 cm) diameter cast aluminum
Steering Controls
1-5/8" diameter grips; adjustable, dampened
Disclaimer
*The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Warranty

For complete product warranty information contact Toro Customer Service

72910 Product Warranty
- EN (3455-279)

Accessories

E-Z Vac Twin & Triple Bagger Systems

These baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

E-Z VAC TWIN BAGGER
Deck-mounted, spindle-driven fan; 2 commercial-grade mesh bags with reinforced front and bottom; 10 cu. ft. capacity (8 bushels).
L 48" deck – 102.3" (259.8 cm)
W 48" deck – 63.8" (162.1 cm)
L 52" deck – 102.3" (259.8 cm)
W 52" deck – 67.7" (172.0 cm)

E-Z VAC TRIPLE BAGGER
Deck-mounted, spindle-driven fan; 3 commercial-grade mesh bags with reinforced front and bottom; 16.7 cu. ft. capacity (13.4 bushels).
L 60" deck – 106.1" (271.9 cm)
W 60" deck – 75.2" (191.1 cm)
L 72" deck – 109.3" (279.1 cm)
W 72" deck – 87.2" (563.9 cm)
NOTE: Length & width measurements are as installed.

E-Z Vac™ DFS Collection System

Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 8.3 cu. ft. capacity (6.7 bushels).
L 48" deck – 103.2" (262.0 cm)
W 48" deck – 63.9" (162.3 cm)>
L 52" deck – 103.2" (262.0 cm)
W52" deck – 67.8" (172.1 cm)

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 13.7 cu. ft. capacity (11 bushels).
L 60" deck – 107.1" (271..9 cm)
W 60" deck – 75.2" (191.1 cm)
L72" deck – 110.2" (281.3 cm)
W 72" deck – 87.2" (221.1 cm)
NOTE: Length & width measurements are as installed.

Recycler® Mulching Kits

Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.

Optional Blades

In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Light Kit

The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

Part # 107-9880 – 7000 Series and Z100-Z500
Part # 116-1154 – G3 and 3000/5000/6000 Series
Part # 130-8469 – 8000 Series Direct Collect Z
Part # 114-3505 – All Grandstands (2015 models and prior)
Part # 133-1437 – All Grandstands (2016 models)
Part # 133-1495 – All Grandstands (2016 models)

Toro Z Stand™

Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

Part # 105-1622 Z Stand Kit – Z200, Z500, 7000 Series
Part # 117-0354 Z Stand Kit – 72" 5000/6000 Series (Excludes Rear Discharge 74944)
Part # 121-4811 Z Stand Kit – 48"-60" 2000/3000/5000/6000 Series

Sun Shades

Optional fabric sun shade provides protection and comfort by shielding the operator from the elements. See a dealer near you for pricing and availability.

Part # 115-4510 - Sunshade – All Z-Masters with ROPs
Part # 110-1996 - Cool Top-ROPs Mounted Fan – 7000/Z500 Series only

Utility Bags

Toro® utility bags for riding mowers are ideal for holding trash, tools, keys, and cell phones. They keep landscaping pros on the go and productive by transporting the essentials they need to get the job done. The lightweight yet durable bags are constructed of heavy-duty mesh fabric to keep contents secure, visible and within reach. They're available in over-the-seat and armrest styles and in sizes that match varying machines and mowing needs.

Cool Tops™ Downdraft System

Available exclusively from Toro, the Cool Tops downdraft system is a patented, 12-volt fan that can be mounted to Toro® Z Master® riding mowers equipped with a roll-over protection system (ROPS) - whether old or new. It's designed to promote comfort and productivity by keeping motor heat, insects, and debris off equipment operators. The Cool Tops heavy-duty, S Blade Trimline fan utilizes the power system of a mower's traction unit to deliver an output of 1800 cubic feet per minute (cfm) (50.9 cubic metres per minute) air flow. The fan's sturdy construction measures 25 inches (63.5 cm) long by 20.5 inches (52 cm) wide and includes a steel frame, plus a waterproof motor and switch.

Deluxe Rider Cover

Heavy-duty waterproof cover is abrasion- and tear-resistant. Vented design helps minimize heat and moisture build-up.

Part # 490-7319 Deluxe Rider Cover – All Z-Masters

Operator-Controlled Discharge Chute

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Parts & Manuals

Select your serial number range from the options below to view parts & manuals.

72910 Serial #
414161126-999999999
412800000-414161125
409521812-412799999
409219336-409521811
400000000-409219335

Homeowner

Golf

Professional Contractor

Sports Fields & Grounds

Agriculture

Rental

Government

5000 Series 60" (152 cm) 25.5 HP 852cc (72910)