6000 Series 72" Zero Turn Mower | 31 HP 999cc | 72961

6000 Series 72" (183 cm) 31 HP 999cc (72961)

Find a Dealer

Highlights

Professional Performance - With the 31 HP* (23.12 kw) Kawasaki® FX 999cc Engine.
72" TURBO FORCE® Cutting Deck - Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.
Comfortable Ride - The deluxe suspension seat absorbs bumps and vibrations to reduce fatigue and keep you mowing comfortably all day long.
16cc unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points

The Z Master 6000 Series is one of Toro’s most advanced zero-turning radius mowers. It’s also one of our most comfortable. This Z Master® 6000 Series mower has a 31 HP (23.12 kw) Kawasaki® FX 999cc Engine with 72" (183 cm) TURBO FORCE® deck.

Features

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Handcrafted Seat with Arm Rests

Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smooth, Powerful Response

The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminum Spindle

Cools quickly for enhanced durability and performance.

Specifications

Engine
31 HP* (23.12 kw) Kawasaki® FX 999cc
Fuel Capacity
Gas/12 gal (45.4 L)
Adjustable Discharge Baffle
Standard, tools-free
Air Filter
Heavy-Duty Canister Air Cleaner
Blade Tip Speed
18,500+ ft/min (5,640 m/min)
Blade Type
.25" (.6 cm) heat-treated steel
Carrier Frame
3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
Caster Tires
13” X 6.5” – 6” (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic
Clutch
Electromagnetic
Deck Design
80-Grade 7-Gauge 72" (183 cm) TURBO FORCE® w/bull-nose bumper
Discharge Chute
Rubber
Drive System
Unitized Pumps (16cc/rev) & Wheel Motors (17.1 cir)
Drive Tires
24" x 12" – 12" (61 cm x 30.5 cm – 30.5 cm)
Ground Speed
11.5 mph forward (18.5 km/h)
Height
ROPS Height (Folded) 46.8" (118.9 cm), ROPS Height (Upright) 70.5" (179.1 cm)
Height of Cut
1.0" – 5.5" (2.5 cm x 14 cm)
Hour Meter
Standard
Hydraulic Fluid
Premium synthetic
Length
86.1" (218.7 cm)
ROPS
Folding; standard
Seat
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Bearings
Greaseless ball bearings
Spindle Housing
9" (22.9 cm) diameter cast aluminum
Steering Controls
1-5/8" (4.1 cm) diameter grips; adjustable, dampened
Weight
1,334 lbs (605.1 kg)
Width
73.6" (186.9 cm) with Deflector up, 87.6" (222.5 cm) with Deflector down
Disclaimer
*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J1995. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Warranty

For complete product warranty information contact Toro Customer Service

72961 Product Warranty
- EN (3455-279)

Accessories

E-Z Vac™ DFS Collection System

Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 8.3 cu. ft. capacity (6.7 bushels).
L 48" deck – 103.2" (262.0 cm)
W 48" deck – 63.9" (162.3 cm)>
L 52" deck – 103.2" (262.0 cm)
W52" deck – 67.8" (172.1 cm)

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 13.7 cu. ft. capacity (11 bushels).
L 60" deck – 107.1" (271..9 cm)
W 60" deck – 75.2" (191.1 cm)
L72" deck – 110.2" (281.3 cm)
W 72" deck – 87.2" (221.1 cm)
NOTE: Length & width measurements are as installed.

E-Z Vac Twin & Triple Bagger Systems

These baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

E-Z VAC TWIN BAGGER
Deck-mounted, spindle-driven fan; 2 commercial-grade mesh bags with reinforced front and bottom; 10 cu. ft. capacity (8 bushels).
L 48" deck – 102.3" (259.8 cm)
W 48" deck – 63.8" (162.1 cm)
L 52" deck – 102.3" (259.8 cm)
W 52" deck – 67.7" (172.0 cm)

E-Z VAC TRIPLE BAGGER
Deck-mounted, spindle-driven fan; 3 commercial-grade mesh bags with reinforced front and bottom; 16.7 cu. ft. capacity (13.4 bushels).
L 60" deck – 106.1" (271.9 cm)
W 60" deck – 75.2" (191.1 cm)
L 72" deck – 109.3" (279.1 cm)
W 72" deck – 87.2" (563.9 cm)
NOTE: Length & width measurements are as installed.

Light Kit

The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

Part # 107-9880 – 7000 Series and Z100-Z500
Part # 116-1154 – G3 and 3000/5000/6000 Series
Part # 130-8469 – 8000 Series Direct Collect Z
Part # 114-3505 – All Grandstands (2015 models and prior)
Part # 133-1437 – All Grandstands (2016 models)
Part # 133-1495 – All Grandstands (2016 models)

Operator-Controlled Discharge Chute

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Optional Blades

In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Recycler® Mulching Kits

Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.

Toro Z Stand™

Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

Part # 105-1622 Z Stand Kit – Z200, Z500, 7000 Series
Part # 117-0354 Z Stand Kit – 72" 5000/6000 Series (Excludes Rear Discharge 74944)
Part # 121-4811 Z Stand Kit – 48"-60" 2000/3000/5000/6000 Series

Parts & Manuals

Select your serial number range from the options below to view parts & manuals.

72961 Serial #
414121574-999999999
413000000-414121573
412413841-412999999
409035563-412413840
400000000-409035562

Homeowner

Golf

Professional Contractor

Sports Fields & Grounds

Agriculture

Rental

Government

6000 Series 72" (183 cm) 31 HP 999cc (72961)