7000 Series 60" Zero Turn Mower | 25 HP 898cc Z580-D Diesel | 72267

Toro Z Master 7000 Series Diesel Zero Turn Mower

Lower Fuel Consumption - With the 25 HP (19 kw) Kubota® Diesel 898cc Engine.
60" TURBO FORCE® Cutting Deck - Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.
Robust Cast Aluminium Spindle - Cools quickly for enhanced durability and performance.
Comfortable Ride - The deluxe suspension seat absorbs bumps and vibrations to reduce fatigue and keep you mowing comfortably all day long.

Overview

7000 Series zero turn mower with a high-volume 60" (152 cm) TURBO FORCE® deck. Powered by high-torque 25 hp (19 kw) Kubota® Diesel 898cc Engine. Fast ground speed of 11.2 mph (18 km/h).

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Handcrafted Seat with Arm Rests

Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

High-performance Discharge Chute

High performance 5/16" (8 mm) rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides excptional clipping dispersion.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Powerful Engines

The Kubota 25 hp (18.6 kw) liquid-cooled diesel engines are geared for high torque while also delivering fast 11.2 mph (18 kph) ground speeds. The powerful, yet fuel-efficient engines come in a compact package that is exceptionally well balanced for low vibration. The liquid-cooled system ensures cleaner combustion and extended engine life.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminum Spindle

Cools quickly for enhanced durability and performance.

Specifications

Engine
25 HP* (19 kw) Kubota® Diesel 898cc
Fuel Capacity
Diesel -12 gallons (45.4 L)
Cutting Width
60" (152 cm) TURBO FORCE® deck
Adjustable Discharge Baffle
Standard, tools-free
Air Filter
Heavy-Duty Canister Air Cleaner
Armrests
Standard
Blade Tip Speed
18,500 ft/min (5,640 m/min)
Blade Type
.204" (5 mm) thick heat-treated steel
Carrier Frame
2" x 2" x 3/16" (5.1 x 5.1 x 5 mm) steel
Caster Tires
13" x 6.5"-6" (33 x 16.5 - 15.2 cm) Flat-free semi-pneumatic
Cooling System
Liquid-Cooled
Deck Design
80-Grade 7-Gauge 60" (152 cm) TURBO FORCE®
Discharge Chute
Rubber
Drive System
Hydraulic 16 cc (1 cu. in.) Hydro-Gear tandem pumps
Drive Tires
24" x 12"-12" (61 x 30.5 - 30.5 cm)
Front Bumper
Reinforced bull-nose front bumper
Ground Speed
11.2 mph (18 km/h) forward
6.3 mph (10 km/h) reverse
Height of Cut
1-1/2" - 5" in 1/4" (3.8 - 12.7 cm in 6 mm) increments
Hydraulic Fluid
Premium synthetic
ROPS
Folding; standard
Seat
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Bearings
Greaseless ball bearings
Spindle Housing
9" (22.9 cm) diameter cast aluminum
Steering Controls
1-5/8" (4.1 cm) dia. levers; adjustable
Weight
1484 lbs / 673.1 kg
Disclaimer
*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Warranty

For complete product warranty information contact Toro Customer Service

72267 Product Warranty

Accessories

Cool Tops™ Downdraft System

Available exclusively from Toro, the Cool Tops downdraft system is a patented, 12-volt fan that can be mounted to Toro® Z Master® riding mowers equipped with a roll-over protection system (ROPS) - whether old or new. It's designed to promote comfort and productivity by keeping motor heat, insects, and debris off equipment operators. The Cool Tops heavy-duty, S Blade Trimline fan utilizes the power system of a mower's traction unit to deliver an output of 1800 cubic feet per minute (cfm) (50.9 cubic metres per minute) air flow. The fan's sturdy construction measures 25 inches (63.5 cm) long by 20.5 inches (52 cm) wide and includes a steel frame, plus a waterproof motor and switch.

Deluxe Rider Cover

Heavy-duty waterproof cover is abrasion- and tear-resistant. Vented design helps minimize heat and moisture build-up.

Part # 490-7319 Deluxe Rider Cover – All Z-Masters

E-Z Vac™ Bagger Collection System

Toro® Z Master® E-Z Vac triple baggers (for 60" / 72" (152cm / 182.9 cm) decks) deliver excellent collection performance, convenience and versatility. Commercial-grade, reinforced mesh bags include convenient dump handles. No tools, quick-release design allows for easy removal of the collection system, making it a snap to alternate between bagging and side discharge.

E-Z Vac™ DFS Collection System

Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 8.3 cu. ft. capacity (6.7 bushels).
L 48" deck – 103.2" (262.0 cm)
W 48" deck – 63.9" (162.3 cm)>
L 52" deck – 103.2" (262.0 cm)
W52" deck – 67.8" (172.1 cm)

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 13.7 cu. ft. capacity (11 bushels).
L 60" deck – 107.1" (271..9 cm)
W 60" deck – 75.2" (191.1 cm)
L72" deck – 110.2" (281.3 cm)
W 72" deck – 87.2" (221.1 cm)
NOTE: Length & width measurements are as installed.

Optional Blades

In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Operator-Controlled Discharge Chute

Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Recycler® Mulching Kits

Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.

Striping Kit

The optional striping kit is easily installed and provides a premium "ball park" after-cut appearance.

Utility Bags

Toro® utility bags for riding mowers are ideal for holding trash, tools, keys, and cell phones. They keep landscaping pros on the go and productive by transporting the essentials they need to get the job done. The lightweight yet durable bags are constructed of heavy-duty mesh fabric to keep contents secure, visible and within reach. They're available in over-the-seat and armrest styles and in sizes that match varying machines and mowing needs.

Z Stand™ Kit

Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide easy access to the underside of the deck, at the shop or in the field. Just swing the on-board Z-Stand jack out in front of the cutting deck, then drive forward until it locks into place.

Parts & Manuals

Select your serial number range from the options below to view parts & manuals.

72267 Serial #
410000000-999999999
406395553-409999999
400000000-406395552

Homeowner

Golf

Professional Contractor

Sports Fields & Grounds

Agriculture

Rental

Government

7000 Series Diesel 60" (152 cm) 25 HP 898cc (72267)

Highlights