The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.
Convenient depth-indicator ensures pipe-laying at uniform depth.
Compression springs allow the head to pivot 30-degree side-to-side for tight turning.
Provides knife like slit in turf ahead of blade. Allows blade to move through turf with minimal tearing.
Rubber isolators control the plow vibration amputude
Creates natural force in the direction of the machine, thus helping to pull pipe and cable through difficult soil conditions.
Mounts onto Dingo loader arm to carry spool of wire or cable. Used with the chuted blade assembly for pulling cable or wire. Part number 104-2685
1/4" x 12" (30.5 cm) Part number 99-2682-03
1/2" x 18" (45.7 cm) Part number 99-8600-03
3/8" x 18" (45.7 cm) Part number 99-8647-03
3/8" x 12" Part number 106-7646-03
Chuted Blade Part number 104-0640
1" (2.5 cm) Taper Lock Puller for PVC. Part number 100-6285
1-1/2" (3.8 cm) Taper Lock Puller for PVC. Part number 100-6290
2" (5.1 cm) Taper Lock Puller for PVC. Part number 100-6284
3/4" to 1-1/4" (1.9 cm to 3.2 cm) Basket Grip Puller for Poly. Part number 100-1662
1-1/4" to 1-1/2" (3.2 cm to 3.8 cm) Basket Grip Puller for Poly. Part number 100-1661
Tapered Threaded Puller. Part number 104-0646
Bullet (needed for Puller). Part number 100-6337
Select your serial number range from the options below to view parts & manuals.