• Recommended for bits up to 24" (61cm)
  • Direct planetary drive
  • Pivots 15 degrees left to right to insure plumb holeson slopes or uneven terrain

This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diametre. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

15° Universal Pivot

Power head swivels in all directions allowing the contractor to create plum holes on hills, slopes and uneven terrain regardless of the orientation of the traction unit. The side-to-side swing has a lockout in the centered position

High Speed Drive

The high speed drive provides maximum bit speed of 86 rpm, allowing the auger to dig holes very fast. The high speed drive delivers 960 ft-lbs torque and is fantastic for any contractor wanting to auger many holes in a short period of time in most ground conditions.

Planetary Gear Drive

The plantetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. The planetary gear drive insures the longevity of the hydraulic motor.

  • Auger Speed
    86rpm @11gpm (42 lpm)
  • Height
    23.4" (59cm)
  • Length
    16.5" (42cm)
  • Shaft
    2-9/16" (6.5 cm) round
  • Torque
    960 ft-lb (1300 N) @ 3000p (207 bar @ 11gpm
  • Weight
    196lbs (89 kg)
  • Width
    25" (64cm)
Auger Bits

Available in 6" 9" 12" 15" 18" 24" 30" (15.2 cm, 22.9 cm, 30.5 cm, 38 cm, 45.7 cm, 61 cm, 76.2 cm). Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro welds will not break under the same conditions. The Toro flighting is composed of 3/8" (1 cm) thick continuous steel where many other augers are 1/8" (3 mm) thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components.

Carbide Teeth & Pilot

For the most demanding conditions, Toro has carbide tooth and pilot options: Wisdom tooth (part number 104-5996) Chisel tooth (part number 104-5997) Hard face Pilot (part number 104-5998)

Cement Bowl

Haul, mix, and pour up to 200 lbs (dry) cement. Eliminates hand mixing.