• 26 hp (19.4 kw) Kawasaki® Twin-Cylinder Engine
  • Toro exclusive traction control system, similar to Dingo TX and STX stump grinder
  • Tracks instead of wheels
  • Easy to maneuver

Extending its popular line of dedicated walk-behind trenchers Toro® TRX-26, is the most powerful dedicated walk-behind trencher on the market. Boasting a 26 hp (19.4 kw) Kawasaki® engine, the TRX-26 is ideal for utility workers, irrigation contractors and plumbers looking for the power of a ride-on trencher, with the maneuverability, price and control of a walk-behind.

Exclusive Toro TRX Control System

Easy-to-use control system doesn't require jerk-style steering like handle bar trenchers. Three simple controls operate all traction and trenching functions. Simple controls are easy for beginners to learn quickly. Similar to Dingo TX and STX stump grinder.

Track Design

• Allows for zero turn capability
• Provides a low center of gravity and large footprint
• Increased stability on side hills
• Eliminates tire ruts and flat tires
• Operates in wet & soft ground conditions.
• Get to the most challenging stumps

Kawasaki Twin-Cylinder Engine

Powerful Kawasaki engines deliver the performance you have come to expect from Toro. The Kawasaki twin-cylinder engine means your trencher will be reliable and easy-to-start. The large oil reservoir maintains a cooler running engine while prolonging engine life.

Heavy-Duty Remote Air Cleaner

Reduces engine wear and improves performance. Heavy-duty remote air filter standard on TRX-26.

TRX Pivoting Trencher Head

Pivoting head provides high ground clearance during transport.

  • Engine Oil Capacity
    2.2 quarts (2.1 liters)
  • Fuel Capacity
    4.8 gallons (18 liters)
  • Headshaft Speed
    210 RPM w/554 ft/lbs (751.1 N) of torque
  • Height
    46" (116 cm)
  • Hour Meter
  • Hydraulic Flow
    13.5 gpm (51.1 lpm) trencher chain, 9.5 gpm (36 lpm) traction each pump
  • Hydraulic Oil Capacity
    6.3 gallons (23.8 l)
  • Hydraulic System Pressure
    2900 psi (199.8 bar)
  • Length
    82.5" (209.6 cm) (boom up)
  • Pivoting Trencher Head
    Provides high ground clearance during transport
  • Track
    5.9" (15 cm) wide - endless nylon reinforced rubber track
  • Transport Speed
    3.1 mph (5 kph) fwd, 1.5 mph rev (2.5 kph). 273 ft/min (83.2 m/min) / 132/ft/min (40.4 m/min)
  • Weight
    1,248 lbs. (566.1 kg)
  • Wheelbase
    23" (58.4 cm)
  • Width
    33.8" (86 cm)

4" (10.2 cm), 6" (15.2 cm) and 8" (20.3 cm)* chain widths available:

Soil & Cup Chains

Rock & Cup Combo Chains

Shark (Rock) Chains (4" and 6" only)

Bullet (Alligator) Chains (4" and 6" only)

*Only available for TRX-26

Bore Drive Head

Easily bore under driveways and sidewalks to simplify irrigation and cable installations. Design allows for boring unit to be lowered into the trench to aide in level operation.

Backfill Blade

Installed in less than a minute without tools to allow TRX to complete trenching job. Cut job time and labor by using the TRX to backfill the open trench efficiently.

Custom Trailer

Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires.

Trencher Boom

24", 36" or 48" reversible booms available

Trencher Crumber

The Toro crumber is designed specifically to make the trench bottom clean and smooth. The crumber follows behind the chain to clean all "crumbs" from the bottom of the trench. The hardend tip of the crumber pulls any loose material back into the chain teeth.