Toro | Sand Pro® 3040 (08703)

Highlights

16 hp (12 kw) Vanguard® Engine
Quick Attach System™ (QAS)
17 Attachments Available
Series/Parallel™ 3WD Traction Drive

The Sand Pro® 3040 is a versatile maintenance machine that not only does an exceptional job grooming surfaces for sports fields. It can also can be converted to perform other critical maintenance tasks. The patented Quick Attach System™ (QAS) allows for under-a-minute attachment changes for 17 attachments. Each attachment was specifically designed to take the operator influence out of the equation for high performance and a consistent surface finish.

Features

Power Packed Engines

The trusted Vanguard® engine is fuel efficient, runs cooler and features a fully pressurized oil lubrication system for longer life.

3WD Series/Parallel™ Traction Drive

The 3WD Series/Parallel™ traction drive improves traction in wet or heavy working conditions to get the job completed quickly. In traditional 3WD units all traction effort is lost as soon as one wheel slips. Series/Parallel™ ensures that you always have tractive effort with at least one wheel to keep your unit from getting stuck and losing precious time.

Ease of Use

Easy to use and adapt to the next task. Having the right tool for the job increases the effectiveness of your crew and the efficiency of your operation. Attachments are designed to minimize operator influence to achieve the same result, regardless of whether a new or veteran employee performed the task.

Front Manual Blade

Finger tip operation (no overhead bar), paired handle/foot pedal and torsion bar to improve down pressure provide level/consistent contouring in difficult areas. Quick-up latch locks blade in transport position between uses to improve operator ease of use.

Maneuverable Steering

For operator ease of use, and to improve the effectiveness of the steerable front attachments, hydraulic power steering is now available on the 5040 and a rugged gear drive system on the 3040. Both designs are now environmentally sealed to ensure long life and reduced maintenance.

Maintenance Friendly Layout

The new unit was designed with the mechanic in mind, to reduce, simplify, and increase access to all scheduled maintenance. The majority of scheduled maintenance projects can be accessed by lifting the operator seat. For increased access, the side and center quarter panels can be taken off by removing just a few bolts.

Quick Attach System™ (QAS)

With the Quick Attach System™ (QAS), anyone can switch from one attachment to another in less than a minute, with no tools required! Match the machine to the environment to get your fields back into playing condition The QAS allows you to do more with less, and get the job done faster. Rear QAS is standard on the Sand Pro® 3040 and 5040, front QAS™ is optional on the Sand Pro® 5040.

Mid-Mount System

With the Mid-mount system, a flex mounted toolbar can be adjusted to flex backwards when it comes in contact with anything from rocks or other rigid objects to prevent gouging or wash boarding. Multiple locking depth settings to ensure consistent depth of scarification from day to day or between operators. A mid-mount leveling system is also available to make quick work of the difficult projects like around dugouts or player positions.

Quick Connect Hydraulics

The new quick connect hydraulics allow anyone to connect or disconnect any of the powered attachments in under a minute. This eliminates the need for dedicated equipment.

Specifications

Engine
16 hp (12 kw) Vanguard® 4-cycle, gas
Fuel Capacity
5 gal (18.9 L)
Ground Speed
0-10 mph (0 - 16.1 kph)
Height
45.25 in (1.15 m)
Length
67.5 in (1.7 m)
Traction Drive
3 wheel drive
Weight
930 lbs. (422 kg)
Warranty
2-year limited warranty
Width
58" (147.3 cm)

Attachments

Midmount Scarifier/Leveling Blade

Mid-mount leveling blade attaches to any tine toolbar to quickly level out large areas. Selectable depth engagement from ground level to 1.5 (3.8 cm), 52 (132.1 cm) width, transport height 6.75 (17.1 cm)

Rear Finish Grader

QAS Designed for leveling and/or scarifying large areas like difficult sports field areas. 66 (168cm) width, box plow and scarifier, 1.8 (4.5cm) max working depth, spring load regulation to allow relief if an obstruction is hit. Hardened carbide tips available for scarifier teeth.

Rear Drag Mat Carrier System

QAS mounting carrier frame designed to eliminate the need to manually lift drag mats between passes and traveling from field to field. 72 (183cm) width, accepts steel or cocoa drag mats. Hydraulic raise/lower of drag mats.

Rear Cocoa Drag Mat

Designed to quickly produce a premium finish on dry bunkers.

Rear Steel Drag Mat

Designed to quickly groom and finish wet or dry sports fields, while minimizing the displacement of infield mix especially into the outfield.

Rear Spiker

QAS Ground driven design for spiking and increasing air flow on turf. Rear QAS 57.6 (746cm) width, 1.25 (3.1cm) max working depth, 2.4 (6.1cm) blade spacing. Two independently floating units, with 12 spiker blades and 11 hold down fingers.

Rear Segmented Grooming Broom

QAS grooming brooms designed to minimize top surface disruption to maximize firmness for a smooth finished look.

Front Manual Blade

Spring balanced manual blade, designed for leveling out uneven areas. Comes with additional foot lever to enable operator to easily apply added down pressure. 40 (101 cm) width steel blade, spring assisted for raising plow.

Rear Tooth Rake

QAS Grooming rake designed to lightly scarify, pack, smooth and groom in one pass (for wet or dry conditions). Great for improving the performance of neglected sports fields. 72" (183cm) width, with 5 rake sections, 27 prongs adjustable for depth and wear.

Rear Spring Rake

QAS spring leaf rake assembly designed for sole use or in combination with tooth rake to achieve desired appearance. Great for wet conditions and collecting debris in groomed areas. Rear QAS 76" (193cm) width, with 5 individual rake sections and spring teeth for excellent floatation and minimal surface disruption.

Front 60" (152.4 cm) Blade Extension

60" (152.4 cm) bolt on expansion blade designed for leveling out larger uneven areas (for manual blade only).

Midmount Solid Tine Toolbar

Reversible solid tines designed for aggressive scarifying and harder surfaces (carbide tipped teeth are also available for the harshest conditions).

Midmount Spring Tine Toolbar

Flexible 1/4"x 5" (6 mm x 12.7 cm) tines designed for light scarifying and breaking up top crusts after rains.

Midmount Weeder Tine Toolbar

Cultivation style tines for removing weeds and grass from unwanted areas.

Rear Hitch Kit

200 lbs (90.7 kg) gross trailer weight/ hitch load.

Rear Debris Blower

QAS high power cyclone blower designed to quickly clear debris from groomed and unwanted areas. Hydraulically powered, 2000 rpm fan speed - 2700 cfm @ 81 mph (76.4 cmm @ 130 kph).

Sports Field Edger

Use the Sports Field Edger to ensure safe and playable transition interfaces by removing overgrown turf and infield lip build-up.

Lip Broom

The Lip Broom eliminates the task of manually maintaining infield lips by removing ridge buildup and sweeping material back into the infield.

Accessories

Accessory Guide

View all available attachments and accessories in the Accessory Guide

Documents

Documents	Type	Language
Product Literature	Sand Pro 3040/5040 Product Brochure	English PDF
Data Sheet	SandPro 3040/5040 SFG Sell Sheet	English PDF
Accessories	Sand Pro 3040/5040 Accessory Brochure	English PDF
Specifications	Sand Pro 3040/5040 Detailed Specifications	English PDF

Parts & Manuals

Select your model year from the options below to view parts & manuals.

Serial #	Year
316000001-316999999	2016
315000001-315999999	2015
314000001-314999999	2014
314000001-314999999	2014
313000001-313999999	2013
312000001-312000271	2012
312000272-312999999	2012
311000001-311000490	2011
311000491-311999999	2011
310000001-310000300	2010
310000301-310000500	2010
310000501-310999999	2010
290000001-290999999	2009
280000001-280999999	2008
270000001-270000400	2007
270000401-270999999	2007
260000001-260000200	2006
260000201-260000400	2006
260000401-260999999	2006
400000000-999999999