• No filters to change or chemically treated disks to handle
  • Irrigation takes place at or below grade so there is minimal water loss due to mist, evaporation, run-off or wind
  • Ideal for shrub areas, median strips, public recreation areas and parking islands
  • Seven-year warranty against root intrusion

DL2000 pressure-compensating dripline is the most technologically advanced subsurface irrigation system available. Through its non-toxic ROOTGUARD® technology, only DL2000 delivers optimal water application directly to the root zone while safely inhibiting root intrusion.

Dripline calculator click here

View Larger
U.S. Government-approved ROOTGUARD Protection

The pre-emergent, TREFLAN®, is impregnated into the emitter during the molding process and creates a “force field” effect around the emitter outlet, diverting root growth and assuring long term reliability.

View Larger
At-Grade Or Buried Options

Can be installed at grade or buried 4” – 8” (10,2- 20,4cm)underground, delivering irrigation directly to the plant’s root zone.

View Larger
Pressure Compensating Self-cleaning Emitters

Provide precise, trouble-free water application. TREFLAN® impregnated emitters are inseparably welded to the inside wall of durable polyethylene dripline tubing during manufacturing.

View Larger
Environmentally Friendly

Irrigation takes place at or below grade so there is minimal water loss due to mist, evaporation, run-off or wind. Fertigation needs are reduced because water is applied only at the root zone.

View Larger
Safety and Liability

When DL2000 is installed below ground, the landscape surface is free from irrigation equipment that may disrupt activities or cause injury. Sub-surface performance also avoids slippery walkways and roadways as well as wet walls, fences and windows.

  • Coil Color
    Black and Red
  • Coil Length
    100', 500', 1000' (31, 150, 305 m)
  • Emitter Spacing
    12", 18" (31, 46 cm)
  • Flow
    0.5-1.0 GPH (1.9 - 3.8)
  • Outside Diameter
    0.71" (1.8 cm)
  • Inside Diameter
    0.62" (1.6 cm)
  • Wall thickness
    0.045" (1 mm)
  • Minimum Filtration Requirement
    120 Mesh
  • Recommended Operating Pressure
    15-60 PSI (1 - 4.1 BAR)
  • Size
    5/8" (1.6 cm)
Documents Type Language
Product Literature DL2000™ Series Subsurface Dripline – Sell Sheet English PDF
Manual Landscape Dripline Design – Installation Guide English PDF