Request A Demo

  • Powerful 44 HP Yanmar® Diesel 1568cc Engine
  • 144" (366 cm) Rear Discharge TURBO FORCE® deck
  • Keep the engine cool with twin reversing cooling fans.
  • Choose the right operating mode for mowing conditions, saving fuel costs while maintaining top-level performance with our Horizon™ Technology.

Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. The highly productive 144-inch deck design folds up neatly for easy transport, then folds down to handle your biggest jobs — in half the time of comparable mowers. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.

Massive 144" Cutting Deck

Step up your productivity with a massive 144” wingdeck cutting system, that quickly and easily folds up to only 83”, small enough to fit on most trailers.

44 HP Yanmar Turbo Diesel Engine

Powered by a 44 hp Yanmar Turbo Diesel Engine, this mower is packed with power to tackle the toughest mowing jobs.

Twin Reversing Cooling Fans

Keep the engine cool with twin-reversing fans that also help keep the rear screen area clean and the air flowing.

High/Low Speed Settings

Get to your next job, or back to the trailer quickly with transport speeds of up to 17 MPH, while delivering more control and torque in low-speed settings with 10mph top speed.

4-Inch Suspension Seat

Stay comfortable on the job with the 4" suspension seat.

Horizon Technology

Choose the right operating mode for mowing conditions, saving fuel costs while maintaining top-level performance with our Horizon™ Technology.

  • Engine
    44 hp* Yanmar® Diesel 1568cc
  • Fuel Capacity
    Diesel/12.5 Gal (47.3 L)
  • Cutting Width
    144" (366 cm) (Rear Discharge - Wing Deck)
  • Air Filter
    Heavy-Duty Donaldson® Canister-Style Air Cleaner
  • Armrests
  • Blade Tip Speed
    18,500+ ft/min
  • Caster Tires
    15” x 6” – 6” (38.1 x 15.2 x 15.2 cm) Flat-Free Semi-Pneumatic
  • Clutch
    Wet Disc
  • Deck Design
    7-Gauge TURBO FORCE® w/ Bull-Nose Bumper
  • Drive System
    17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
  • Drive Tires
    26" x 12" – 12" (66.0 x 30.5 x 30.5 cm)
  • Engine Horsepower
    44 HP
  • Engine Displacement
  • Foot Operated
    Height of Cut

    Hydraulic with Rocker Switch
  • Ground Speed
    10/17 MPH forward (16.1/27.4 km/h)
    6 MPH reverse (9.7 km/h)
  • Height of Cut
    1.0” – 5.5” (2.5 – 14.0 cm)
  • Hour Meter
    Horizon™ Technology
  • ROPS
  • Seat
    Deluxe Suspension Comfort w/Armrests (Flip-Up, Iso-Mount)
  • Spindle Bearings
  • Spindle Housing
    9" (22.9 cm) Diameter Cast Aluminum, 1" (2.5 cm) Heavy-Duty Spindle Shaft
  • Steering Controls
    1.4” (3.6 cm) Diameter Grips; Adjustable, Dampened
  • Disclaimer
    * The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
    **See retailer for warranty details.

Select your serial number range from the options below to view parts & manuals.

72144 Serial #