• Convenient depth-indicator
  • Elliptical vibrating motion
  • Pull pipe up to 2" diameter
  • 12" and 18" blades available

The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.

Depth Indicator

Convenient depth-indicator ensures pipe-laying at uniform depth.

Flexible Head

Compression springs allow the head to pivot 30-degree side-to-side for tight turning.

Heavy Cast Coulter

Provides knife like slit in turf ahead of blade. Allows blade to move through turf with minimal tearing.


Rubber isolators control the plow vibration amputude

Elliptical Vibrating Motion

Creates natural force in the direction of the machine, thus helping to pull pipe and cable through difficult soil conditions.

  • Bearings
    4 pressed-in spher. roller
  • Blade Adjustment
    Adjust f/ 0 -18" (0-46cm) Depths
  • Blade Type
    See Accessories
  • Chain
    Machined, plated 2" (5cm) hex bullet
  • Construction
    Fabricated, welded steel frame
  • Depth Control
  • Height
    27.0" (69cm) w/o Blade
  • Length
    34" (86cm)
  • Quick Couplers
    Male & Female Quick Couplers
  • Weight
    457lbs (207 kg)
  • Width
    28.2" (72cm)
  • Working Depth
    Adjust f/ 6-18" (15-46cm) Depths
Spool Carrier

Mounts onto Dingo loader arm to carry spool of wire or cable. Used with the chuted blade assembly for pulling cable or wire. Part number 104-2685

Blade Options

1/4" x 12" (30.5 cm) Part number 99-2682-03
1/2" x 18" (45.7 cm) Part number 99-8600-03
3/8" x 18" (45.7 cm) Part number 99-8647-03
3/8" x 12" Part number 106-7646-03
Chuted Blade Part number 104-0640

Puller Options

1" (2.5 cm) Taper Lock Puller for PVC. Part number 100-6285
1-1/2" (3.8 cm) Taper Lock Puller for PVC. Part number 100-6290
2" (5.1 cm) Taper Lock Puller for PVC. Part number 100-6284
3/4" to 1-1/4" (1.9 cm to 3.2 cm) Basket Grip Puller for Poly. Part number 100-1662
1-1/4" to 1-1/2" (3.2 cm to 3.8 cm) Basket Grip Puller for Poly. Part number 100-1661
Tapered Threaded Puller. Part number 104-0646
Bullet (needed for Puller). Part number 100-6337