2. Underground
  3. Trenchers
  4. RT600

RT600 Riding Trencher

Sell Sheet

Highlights

  • Inline hydrostatic ground and attachment drive system provide optimal performance for trenching and plowing
  • Optional P85 vibratory plow capable of installing pipe, wire, or cable up to 30”
  • Standard four-wheel steering with planetary axles using constant velocity u-joints makes getting into tight spaces even easier

Overview

Using Toro-exclusive trencher drive technology - the only trencher in its class to use a flywheel, torsion shaft, and planetary gear box reduction system - the RT600 delivers smooth, consistent performance in the toughest digging conditions.

View Larger
Easy Backfilling

A six-way, heavy-duty backfill blade is standard on Toro riding trenchers. The float position allows blade to smoothly follow the ground's contours.

View Larger
Highly Maneuverable

Standard four-wheel steering with planetary axles using constant velocity u-joints and a tight turning radius makes getting into tight spaces even easier.

View Larger
Maximum Operator Comfort for Maximum Productivity

Ergonomic controls at your fingertips, full range of clear analogue gauges, and a pivoting suspension operator's seat ensures operator comfort and jobsite visibility for all-day productivity.

View Larger
Power You Can Count On

Powered by a Cummins® B3.3 4-cylinder, liquid cooled, diesel engine - trusted for its power, reliability, and lifespan.

View Larger
Exclusive Planetary Gear Reduction Trencher Drive

The planetary trencher drive uses a flywheel, torsion shaft and planetary gearset for smooth operation and longer life. The flywheel keeps the chain line from stalling in tough soil conditions and minimizes pressure spikes in the hydraulic system. Between the flywheel and the planetary gearset, the torsion shaft serves as a spring to absorb shock loads from the trencher driveline. The planetary gearset multiplies the hydrostatic motor torque for unsurpassed digging power. These features all combine to deliver smooth, consistent, and powerful trenching, even as ground conditions change.

Dual Hydrostatic System

Inline hydrostatic ground and attachment drive system provide optimal performance for trenching and plowing.

  • Attachment Pump Capacity
    Maximum: 35.6 gpm (134.8 L/m)
  • Auxiliary Pump Capacity
    6.5 gpm per port (25 L/m) (2 ports on pump)
  • Auxiliary Pump Relief
    2,500 psi
  • Axle Type
    (Front/Rear) Steerable Planetary
  • Cooling System
    Liquid cooled, 4.5 gal (17 L) capacity
  • Dimensions
    Length:128.3" (326 cm) ; Width: 72" (185 cm) ; Height: 96" (244 cm)
    Weight: 6,350 lbs (2,880 kg), Ground Clearance: 7.4" (18 cm)
  • Engine
    Cummins® B3.3
  • Fuel Capacity
    20 gallons (75 liters)
  • Ground Drive Pump Capacity
    35.6 gpm (134.8 L/m)
  • Ground Drive Pump Relief Pressure
    5,000 psi (345 Bar)
  • Hydraulic Oil Capacity
    19 gallons (72 liters)
  • Maximum Creep Speed
    1.4 mph (2.3 km/h)
  • Tires
    31 x 15.50-15, 8 ply
  • Transport Speed
    6.2 mph (10.8 km/h) fwd. 4.6 mph (7.4 km/h) rev.

Sliding Offset

Sliding Offset The sliding offset attachment allows the trencher to start in the center of the machine, and move a total of 29.75” on the slider track to the right, and at its furthest offset point the center of the trencher chain ends up in the center of the right rear tire.

Combo Mount

The innovative combo mount system can potentially minimize downtime by allowing both a trencher and a plow to be mounted to the back of the machine, eliminating the need to change attachments depending on installation requirements. The RT600 combo uses the new direct drive trencher in combination with the heavy-duty P85 plow attachment. The utilization of the combo mount means that the operator can achieve increased versatility by adding an attachment without sacrificing performance.

View Larger
Productive Plowing

Optional P85 Vibratory Plow is capable of installing pipe or wire up to 30" (76 cm) deep.

View Larger
Optional Backhoe

Digging is fast and efficient with a front mounted heavy-duty backhoe with a digging force of 6,700 lbs (3,039 kg), a depth up to 7'5" (229 cm), and a reach of 11'4" (345 cm). True over-center backhoe design ensures consistent machine stability when backhoe is in transport mode.

Documents Type Language
16_sw_490-8726_rev1_RT600

Select your serial number range from the options below to view parts & manuals.

Serial #
313000001-313000500
314000001-314999999
313000501-313999999