eDingo® TX 750 Electric Track Loader, Narrow

Model: 22230
UPC/EAN: 21038222301

Rated operating capacity of 750-lbs.
Easily clear the side of 30-yard dumpsters or one-ton trucks
Powered by HyperCell Power System® delivers up to 8 hours of continuous runtime.

Top

Overview

Meet the unique demands of interior construction and demolition with the productivity-boosting Toro® eDingo® TX 750. Toro’s patented HyperCell® Battery technology offers up to eight hours of quiet runtime and zero engine exhaust emissions. Intuitive controls and compact design allow operators to easily maneuver in tight spaces while saving time, reducing fatigue and boosting productivity.

Features

Rated Operating Capacity (ROC)

This compact powerhouse can lift up to 750 lbs

81-inch hinge pin height

Easily clear the side of 30-yard dumpsters or one-ton trucks

Powered by HyperCell

Toro’s proprietary battery technology offers reduced noise, zero engine exhaustemissions and all-day runtime*.*Run time may vary depending on attachment being used

Specifications

Battery	Toro HyperCell Lithium Ion
Battery Capacity	22.3 kWh
Battery Charging Requirements	240V
Battery Chemistry	Toro HyperCell Lithium Ion
Dump Angle	40 deg
Fuel Type	Electric
Ground Clearance	14.7 cm
Ground Speed - Forward	Up to 4.0 mph
Ground Speed - Reverse	Up to 2.0 mph
Height	138.4 cm
Hinge Pin Height	205.7 cm
Length	167.6 cm
Loader Arms	Radial
Max Operating Height	270.7 cm
Rated Operating Capacity*	340 kg
Reach - Fully Raised	53.6 cm
Tip Capacity	971.5 kg
Track Length	321.5 cm
Track Width	13.7 cm
Tracks	MERT Track With “B” Style Tread
Traction	Electrically Driven
Weight	1,161.6 kg
Width	80.65 cm

Accessories

CABLE-ASSEMBLY, CHARGER (Part number 122-3489)

CABLE-ASSEMBLY, CHARGER (Part number 122-3490)

CABLE-ASSEMBLY, CHARGER (Part number 122-4204)

PX HYD FLUID (5 GAL) (Part number 133-8086)

Toro 55 Gallon PX Extended Life Hydraulic Fluid (Part number 133-8087)

Toro 55 Gallon PX Extended Life Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.

PX HYDRAULIC FLUID-4 PK GALLON (Part number 138-9460)

KIT-LIGHT (Part number 163-1225)

KIT-CHARGER, NORTH AMERICAN (Part number 163-1244)

KIT-CHARGER, EUROPEAN (Part number 163-1245)

Loader Bucket Attachment 113 Litres (Part number 22340)

Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 1 m³ (4 cubic feet)

Loader Bucket Attachment 255 Litres (Part number 22342)

Designed for Dingo® TX 1000, volume = 113 litres. This high volume loader bucket attachment is great for moving rock, dirt, sand or other materials off and around the job site. Ideal for jobs with large amounts of material to move.

Loader Bucket Attachment (Part number 22409)

Light Materials Loader Bucket Attachment (Part number 22410)

Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 0.2 m³, is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.

Utility Blade Attachment (Part number 22414)

The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from pavements in one pass.

Bore Drive Head Attachment (Part number 22420)

The Toro® Dingo® boring unit allows you to dig under pavements and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.

Rod and Reamer Kit (Part number 22421)

Easily bore under driveways and pavements to simplify irrigation and cable installations. Use with Bore Drive Head attachment model 22420. Working depth: 48 cm. Bits and reamers up to 8.9 cm (3.5") in diameter.

Stump Grinder Attachment (Part number 22429)

The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.

Tree Fork Attachment (Part number 22438)

The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to manoeuvre, helping you transport and position trees or shrubs exactly where you want them.

Tiller Attachment (Part number 22445)

The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 15 cm (6") deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.

Trencher Crumber (Part number 22464)

Spring design, trencher accessory to help clean out trenches

Trench Filler, Compact Utility Loader (Part number 22472)

High Torque Trencher Attachment (Part number 22473)

High-torque trencher head with heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 127cm below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.

High Speed Trencher Attachment (Part number 22474)

Ideal for fast, efficient trenching in most soil conditions. Great for cable, pipe or irrigation installations.

Trencher Crumber (Part number 22477)

Trencher accessory to help clean out trenches

4-in-1 Bucket Loader Bucket Attachment (Part number 22478)

Designed to be used on the Dingo 323, 320-D, e-Dingo, TX 427, TX 525 and TX 1000 models, this attachment offers the versatility of 4 attachments. Use as a standard bucket, a leveler, a grapple rake and a blade.

24" x 4" Soil Chain (61 cm x 10.2 cm) (Part number 22480)

2-pitch chain w/4-pitch tooth spacing (24 station)

24" x 4" Combo Chain (61 cm x 10.2 cm) (Part number 22481)

2-pitch chain w/soil and rock teeth (24 station)

24" x 4" Rock Chain (61 cm x 10.2 cm) (Part number 22482)

Welded shark chain 100% rock tooth (24 station)

24" x 6" Soil Chain (61 cm x 15.2 cm) (Part number 22483)

2-pitch chain w/4-pitch tooth spacing (24 station)

24" x 6" Combo Chain (61 cm x 15.2 cm) (Part number 22484)

2-pitch chain w/soil and rock teeth (24 station)

24" x 6" Rock Chain (61 cm x 15.2 cm) (Part number 22485)

Welded shark chain 100% rock tooth (24 station)

36" x 4" Soil Chain (91.4 cm x 10.2 cm) (Part number 22486)

2-pitch chain w/4-pitch tooth spacing (32 station)

36" x 4" Combo Chain (91.4 cm x 10.2 cm) (Part number 22487)

2-pitch chain w/soil and rock teeth (32 station)

36in x 4in Rock Tooth Chain (Part number 22488)

36" x 6" Rock Chain (91.4 cm x 15.2 cm) (Part number 22489)

Welded shark chain 100% rock tooth (32 station)

36" x 6" Soil Chain (91.4 cm x 15.2 cm) (Part number 22490)

2-pitch chain w/4-pitch tooth spacing (32 station)

36" x 6" Combo Chain (91.4 cm x 15.2 cm) (Part number 22491)

2-pitch chain w/soil and rock teeth (32 station)

48" x 4" Soil Chain (122 cm x 10.2 cm) (Part number 22492)

4-pitch chain w/4-pitch tooth spacing (20 station)

48in x 4in Combination Chain (Part number 22493)

48" x 6" Soil Chain (122 cm x 15.2 cm) (Part number 22494)

4-pitch chain w/4-pitch tooth spacing (20 station)

48" x 6" Combo Chain (122 cm x 15.2 cm) (Part number 22495)

4-pitch chain w/soil and rock teeth (20 station)

Narrow Loader Bucket Attachment (Part number 22520)

Handle compact construction and remodelling sites by moving through 91.4cm gates without a problem. This 87.6cm wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tyres.

Grapple Rake Attachment (Part number 22577)

The Toro grapple rake attachment allows operators to grab, drag, lift, and place materials with ease. The grapple has two heavy-duty cylinders capable of producing 1361 kg of clamping force at the tine tips, insuring you can "grab-ahold" and not let go.

DINGO SNOW THROWER (Part number 22585)

DINGO ADJUSTABLE FORKS (Part number 22586)

Grapple Bucket Attachment (Part number 22590)

Designed for contractors looking for a bucket to grab, drag, lift and remove materials on residential, commercial and demolition sites. Designed to be used on the Dingo 323, 320-D, e-Dingo, TX 427, TX 525, TX 1000 and e-Dingo models.

MULTI-PURPOSE TOOL (Part number 22672)

FLOOR SCRAPER (Part number 22673)

High Torque Auger Attachment (Part number 22805)

In any drive head, there is a trade-off between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo's capability to dig 30" (76.2 cm) holes up to 6' (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Track Loader Auger Attachment (Part number 22806)

This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diameter. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

18" Auger Bit (Part number 22814)

18" Auger Bit, requires 22805 or 22806

24" Auger Bit (Part number 22815)

24" Auger Bit, requires 22805 or 22806

30" Auger Bit (Part number 22816)

30" Auger Bit, requires 22805 or 22806

12" Auger Extension (Part number 22818)

12" Auger Extension - add onto any auger to increase depth

24" Auger Extension (Part number 22819)

24" Auger Extension - add onto any auger to increase depth

6" Full Flight Auger Bit (Part number 22820)

6" Full Flight Auger Bit - requires 22805 or 22806

9" Full Flight Auger Bit (Part number 22821)

9" Full Flight Auger Bit - requires 22805 or 22806

12" Full Flight Auger Bit (Part number 22822)

12" Full Flight Auger Bit - requires 22805 or 22806

15" Full Flight Auger Bit (Part number 22823)

15" Full Flight Auger Bit - requires 22805 or 22806

Soil Cultivator Attachment (Part number 23102)

The soil cultivator is the ultimate attachment for soil preparation! This incredibly versatile attachment can be used to cultivate and level soil as well as blend landscape materials, compost and fertiliser. This attachment will also bury debris such as stones, soil clods and grass. It transforms rough terrain into a perfect planting bed in one pass.

HYDRAULIC BREAKER, DINGO (Part number 23136)

Leveller Attachment (Part number 23165)

This versatile and highly productive tool is a must-have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and transporting materials around the job site.

30IN STANDARD BUCKET (Part number 23174)

30IN PALLET FORK (Part number 23175)

30IN GRAPPLE (Part number 23176)

POWER BOX RAKE, DINGO (Part number 23702)

Red Paint - Gallon Can (Part number 361-11)

PAINT-AEROSOL, DARK METALLIC GRAY (Part number 361-12)

PAINT-SPRAY, TORO TEXTURED BLACK (Part number 361-13)

PAINT-SPRAY, TORO SEMI-GLOSS BLACK (Part number 361-9)

Red Paint - Quart Can (Part number 5340)

Parts & Manuals

Select your model year from the options below to view parts & manuals.

22230 Serial number
420000000-999999999
418706281-419999999
400000000-418706280

Warranty

For complete product warranty information, contact Toro Customer Service

22230 Product Warranty

**See dealer for Warranty details.