Skip to main content

Dingo® TX 427 Track Loader, Wide

Model: 22322

Image Not Found

Dingo® TX 427 Track Loader, Wide

Model: 22322

Model: 22322 UPC/EAN: 21038223223

Key Features

  • Patented TX control system
Find a Dealer

Related Products

Bore Drive Head Attachment

Bore Drive Head Attachment

Model: 22420
Find a Dealer

Product Details

The Toro® Dingo® TX 427 Wide Track extends your versatility, while improving your productivity when faced with a variety of landscapes and ground conditions. The TX 427 Wide Track offers amazing hydraulic power and with only 0.25 bar ground pressure, the Dingo TX 427 is extremely gentle on delicate turf. All of this awesome power is harnessed with only 3 easy-to-use hand controls. These simple controls coupled with walk behind operator position translate into extremely short learning curves, 360° visibility and instant productivity.
Dingo controls
Simple Controls
Three simple controls let operators get to work fast.
Dingo TX427 with the bucket hauling blocks of cement
4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!
Dingo 525 in Florida using the trencher attachment near a sidewalk
Exclusive TX Track Drive
Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.

Air Filter

Two-stage, Heavy-duty, Remote

Cooling System

Air Cooled

Dump Angle

38 deg

Dump Height

117 cm

Engine Displacement

725 cc

Engine Horsepower

18.6 kW (25 hp) @ 3,600 rpm

Engine Make

Kohler

Engine Model

Command Pro Series CH 740

Fuel Tank

22.7 litres

Fuel Type

Petrol

Ground Clearance

11.7 cm

Ground Pressure

24.1 kPa (3.5 psi)

Ground Speed - Forward

Up to 4.5 mph

Ground Speed - Reverse

Up to 2 mph

Height

117 cm

Height - With Bucket

117 cm

Hinge Pin Height

167.1 cm

Hydraulic Flow - Auxiliary

43.1 L/min

Hydraulic Flow - Traction

64 L/min

Hydraulic Pressure

207 bar (3,000 psi)

Length

179.5 cm

Length - With Bucket

233.6 cm

Loader Arms

Radial

Max Operating Height

228.8 cm

Oil Capacity

1.9 litres

Rated Operating Capacity*

242.7 kg

Reach - Fully Raised

55.3 cm

Reservoir Capacity

37.8 litres

Tip Capacity

694 kg

Track Length

245.3 cm

Track Width

24.1 cm

Tracks

Sprocket-drive, 10 Road Wheels Per Side

Traction

Dual Hydrostatic Pump

Weight

903 kg

Wheelbase

79.2 cm

Width

104.1 cm

Width - With Bucket

104.1 cm

Disclaimer

*Per ISO 14397-1
Road Wheel Kit, Dingo TX 413, 420 and 425 Compact Utility Loader (Part number 106-7620)
Reference Guide Kit, Dingo TX Compact Utility Loaders (Part number 107-9310)
TRACK-AGGRESSIVE TREAD, WIDE (Part number 108-9749)
PX HYD FLUID (5 GAL) (Part number 133-8086)
Toro 55 Gallon PX Extended Life Hydraulic Fluid
Toro 55 Gallon PX Extended Life Hydraulic Fluid (Part number 133-8087)
Toro 55 Gallon PX Extended Life Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.
50 HOUR FILTER KIT (Part number 136-4774)
200 HOUR FILTER KIT (Part number 136-4775)
OIL-30/10W-30 SYNTHETIC (Part number 138-6053)
PX HYDRAULIC FLUID-4 PK GALLON (Part number 138-9460)
SCREEN-SPARK ARRESTOR (Part number 142-7683)
KIT-TX427/525 SNOW THROWER POWER (Part number 144-2512)
LIGHT KIT ASM (Part number 144-7101)
DECAL KIT - HERC (Part number 145-6941)
SPOT 2 GPS KIT (Part number 161-6885)
Adjustable Forks, TX 1000 Compact Utility Loaders (Part number 22341)
Standard Bucket
Loader Bucket Attachment (Part number 22409)
Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 1 m³ (4 cubic feet)
Light material bucket attachment
Light Materials Loader Bucket Attachment (Part number 22410)
Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 0.2 m³, is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.
Utility Blade Attachment
Utility Blade Attachment (Part number 22414)
The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from pavements in one pass.
Bore Drive Head Attachment
Bore Drive Head Attachment (Part number 22420)
The Toro® Dingo® boring unit allows you to dig under pavements and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.
Rod and Reamer
Rod and Reamer Kit (Part number 22421)
Easily bore under driveways and pavements to simplify irrigation and cable installations. Use with Bore Drive Head attachment model 22420. Working depth: 48 cm. Bits and reamers up to 8.9 cm (3.5") in diameter.
Multi-Purpose Tool, Dingo (Part number 22423)
Power Box Rake Attachment
Power Box Rake Attachment (Part number 22426)
The Toro Power Box Rake is the perfect tool for seed bed and sod bed preparation. The rotary drum on the power box rake pulverizes rough soil, cuts high spots and fills low spots in one pass; while removing rocks and debris. Pure carbide teeth design produces the best possible seeded sub-soil, which promote superior moisture retention and rapid seed growth.
Dingo Stump Grinder Attachment
Stump Grinder Attachment (Part number 22429)
The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.
Tree Fork Attachment
Tree Fork Attachment (Part number 22438)
The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to manoeuvre, helping you transport and position trees or shrubs exactly where you want them.
Cement mixing bowl attachment
Cement Mixer Attachment (Part number 22442)
This unique attachment will mix and pour up to 200 pounds (90.7 kg) of dry cement. The specially designed auger flighting inside the cement bowl keeps the cement in the bowl during mixing. This same auger design permits cement to be poured into fence post holes with the posts in place!
Tiller Attachment
Tiller Attachment (Part number 22445)
The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 15 cm (6") deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.
Empty Image Container
Trencher Crumber (Part number 22464)
Spring design, trencher accessory to help clean out trenches
Trench Filler, Compact Utility Loader (Part number 22472)
High Torque Trencher Attachment
High Torque Trencher Attachment (Part number 22473)
High-torque trencher head with heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 127cm below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.
High Speed Trencher Head Attachment
High Speed Trencher Attachment (Part number 22474)
Ideal for fast, efficient trenching in most soil conditions. Great for cable, pipe or irrigation installations.
4 in 1 Bucket
4-in-1 Bucket Loader Bucket Attachment (Part number 22478)
Designed to be used on the Dingo 323, 320-D, e-Dingo, TX 427, TX 525 and TX 1000 models, this attachment offers the versatility of 4 attachments. Use as a standard bucket, a leveler, a grapple rake and a blade.
narrow bucket attachment
Narrow Loader Bucket Attachment (Part number 22520)
Handle compact construction and remodelling sites by moving through 91.4cm gates without a problem. This 87.6cm wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tyres.
Grapple Rake Attachment
Grapple Rake Attachment (Part number 22577)
The Toro grapple rake attachment allows operators to grab, drag, lift, and place materials with ease. The grapple has two heavy-duty cylinders capable of producing 1361 kg of clamping force at the tine tips, insuring you can "grab-ahold" and not let go.
FLOOR SCRAPER (Part number 22673)
Swivel auger power head attachment
High Torque Auger Attachment (Part number 22805)
In any drive head, there is a trade-off between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo's capability to dig 30" (76.2 cm) holes up to 6' (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.
Swivel auger power head attachment
Track Loader Auger Attachment (Part number 22806)
This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diameter. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!
Empty Image Container
18" Auger Bit (Part number 22814)
18" Auger Bit, requires 22805 or 22806
Empty Image Container
24" Auger Bit (Part number 22815)
24" Auger Bit, requires 22805 or 22806
Empty Image Container
30" Auger Bit (Part number 22816)
30" Auger Bit, requires 22805 or 22806
Empty Image Container
12" Auger Extension (Part number 22818)
12" Auger Extension - add onto any auger to increase depth
Empty Image Container
24" Auger Extension (Part number 22819)
24" Auger Extension - add onto any auger to increase depth
Empty Image Container
6" Full Flight Auger Bit (Part number 22820)
6" Full Flight Auger Bit - requires 22805 or 22806
Empty Image Container
9" Full Flight Auger Bit (Part number 22821)
9" Full Flight Auger Bit - requires 22805 or 22806
Empty Image Container
12" Full Flight Auger Bit (Part number 22822)
12" Full Flight Auger Bit - requires 22805 or 22806
Empty Image Container
15" Full Flight Auger Bit (Part number 22823)
15" Full Flight Auger Bit - requires 22805 or 22806
Vibratory Plough Attachment
Vibratory Plough Attachment (Part number 22911)
The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.
Soil Cultivator Attachment
Soil Cultivator Attachment (Part number 23102)
The soil cultivator is the ultimate attachment for soil preparation! This incredibly versatile attachment can be used to cultivate and level soil as well as blend landscape materials, compost and fertiliser. This attachment will also bury debris such as stones, soil clods and grass. It transforms rough terrain into a perfect planting bed in one pass.
Concrete Breaker, Dingo Compact Utility Loaders (Part number 23135)
Backhoe Kit, Dingo TX (Part number 23162)
Backhoe, Dingo Compact Utility Loader (Part number 23163)
Leveller Attachment
Leveller Attachment (Part number 23165)
This versatile and highly productive tool is a must-have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and transporting materials around the job site.
30IN STANDARD BUCKET (Part number 23174)
30IN PALLET FORK (Part number 23175)
30IN GRAPPLE (Part number 23176)
10W30 4-CYCLE ENGINE OIL 32 OZ BOTTLE (Part number 38280)
415300000-999999999 412800000-415299999 410000000-412799999 409445442-409999999 408000000-409445441 407400000-407999999 405700000-407399999 404720000-405699999 402000000-404719999 400000000-401999999 316000001-316999999 315000001-315999999 314000001-314999999 313000001-313999999 312000201-312999999 312000001-312000200 311000001-311999999 310000001-310999999 290000001-290999999 280000001-280999999

For complete product warranty information, contact Toro Customer Service

22322 Product Warranty

**See dealer for Warranty details.