| Ver todos los elementos en Greensmaster® 3150/3250 Series |
La Greensmaster 3250-D destaca por su rendimiento contrastado en el campo y su excepcional calidad de corte. Equipadas con unidades de corte DPA patentadas para una calidad de corte superior y un mantenimiento mínimo, junto con controles cómodos para facilitar el manejo y potencia de sobra para cualquier aplicación, no es de extrañar que este modelo clásico proporcione desde hace muchos años la fiabilidad y el rendimiento que exigen los campos de golf, y unas superficies de green que superan todas las expectativas.
| Accesorios opcionales | 3-Wheel Drive Kit, Thatching Reel (Set of 1), Traction Tires, Hydraulic Oil Cooler Kit, Light Kit, Spark Arrestor, Leak Detector, Front Wheel Weight Kit, 2WD Weight Kit, 3WD Weight Kit, Hose Adapter Kit, Radiator Screen Kit, Ground Follow Kit, Bimini Folding Shade, Utility Bag Kit, Seat Cover, RH Armrest, LH Armrest, Armrest Kit, Wireless Hour Meter |
|---|---|
| Accesorios para unidades de corte | 8, 11, 14-Blade Cutting Unit, Roller Options, Groomer Options, Scraper Options, Bedknife and Bedbar Options, Thatching Reel Accessories, Tools and Maintenance Options. |
| Ajuste de la contracuchilla | Dual screw, indexed “click” adjustment to the reel; detents corresponding positively to 0.0007" (0.018 mm) bedknife movement for each position. |
| Altura | 77.5" (197 cm) |
| Altura de Corte | Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed. |
| Anchura de corte | 59" (150 cm) |
| Anchura para el transporte | Outside at Tires: 61" (154.94 cm) Outside at Reels: 68" (173 cm) |
| Anchura Total | 68" (173 cm) |
| Arranque | Arranque con llave |
| Asiento | Contour seat with high backrest. 7" (17.8 cm) fore/aft slider adjustment with two mounting positions, allowing 9" (22.8 cm) total seat travel. Operator manual tube mounted on the seat back for easy access. |
| Batería | 12 V |
| Capacidad de combustible | 22.7 litros (6 galones US) |
| Contracuchilla | Replaceable single edged EdgeMax™ Microcut Bedknife is standard. |
| Controles | Raise/lower-mow lever. Functional control lever (neutral, mow, transport). Foot operated traction drive and brakes. Hand operated choke, throttle. Mechanical engine speed control. |
| Descripción del sistema de dirección | No-tool quick adjust steering arm position, with arm motion allowing a wide range of operator sizes. Steering cylinder has through shaft design for precise straight line tracking. |
| Detección de fugas | Optional Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid. |
| Diámetro del molinete | 12.7cm (5") |
| Dirección asistida | Sí |
| Distancia entre ejes | 48.6" (123 cm) |
| Distribución del césped | Non-adjustable front shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
| Estilo/tipo de cuchilla | Reel |
| Frecuencia de corte/autoafilado | Adjustable up to 1950 RPM at 2760 engine RPM. Backlapping standard. |
| Frenos de servicio/estacionamiento | Foot activated 6" (15.2 cm) drum type mechanical with rack and pawl lock for parking. |
| Indicadores/Instrumentación | Hour meter and warning light cluster. |
| Longitud | 93.9" (238 cm) with baskets |
| Neumáticos delanteros | 19" x 10.50"-8", 4 lonas, dibujo liso |
| Neumáticos traseros | 19" x 10.50"-8", 4 lonas, dibujo liso |
| Número de cuchillas | 11, 14, 8 |
| Peso | 1,216 lbs. (552 kg) with no fuel & no operator |
| Presión sobre el suelo | 8 - 12 psi (.55 - .83 bar) average at recommended minimum tire pressures, with a 200 lb. operator and cutting units down. |
| Refrigeración del motor | Refrigerado por líquido |
| Rodillos | Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft. |
| Seguridad del operador | Roll Over Protection System standard. Sound level of 84 dBA at operator ear under normal conditions. |
| Sistema Eléctrico | Maintenance-free 12-volt battery with 530 minimum CCA at 0° F. 40 amp alternator, circuit fused at 40 amps. Seat switch. High temperature engine kill override switch. Harness terminals, fuse slot, and console switch location available for optional lights installation. |
| Tipo de combustible | Diésel |
| Tipo de cuchilla (descripción) | Reels are 5" (13 cm) in diameter, 21" (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375" (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. |
| Tipo/configuración de la unidad de corte | Cutting units are completely free-floating, each attaching to the tractor by direct pull links and lifted by a centered lift arm. Baskets are supported by carrier frames that are ground following. Cutting unit floatation is unaffected by basket content. Grass baskets are all interchangeable and accessible from the front of the machine. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) |
| Transmisión de tracción | 2WD |
| Transmisión de tracción | Hydraulic piston pump, closed loop system. 2WD Parallel Hydrostatic or optional 3WD Series Parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
| Transmisión del molinete/cilindro | Hidráulico |
| Tren de transmisión | Diésel |
| Tren de transmisión (Descripción del motor) | Kubota® 902 tier 4i, 3-cylinder liquid-cooled diesel engine. 55.0 cu. in. (902 cc). Full pressure lubrication, oil filter. 24.8 hp (18.5 kW) @ 3600 rpm. Engine governed to 2760 rpm high idle, 1500 rpm low idle (no load). |
| Velocidad de avance hacia adelante | 0-16.1 km/h (0-10 mph) |
| Velocidad de siega | 2 - 5 mph (3.2 - 8 km/h) |
| Título | Documentos |
|---|---|
| GR_AntiBobblingRoller_Sell_Sheet_020723.pdf | PDF - Product Literature-es-MX |
Seleccione el año de su modelo entre las opciones siguientes para ver piezas y manuales.
**Para más detalles sobre la garantía, póngase en contacto con su concesionario.