| Ver todos los elementos en Greensmaster® eTriFlex® Series |
The Greensmaster® eTriFlex models carry no hydraulic fluid and utilize all-electric components for traction, steering, lift and cutting. These EnergySmart® models are operationally friendly with noticeable noise reductions, operational cost savings, and other meaningful improvements to complement the ever-important enhancements in cutting performance.
Combining the innovative, Double A-Arm Suspension System with industry-leading Flex technology, the cutting units float freely over any terrain. The new Radius Dependent Speed (RDS™) System, in combination with the Lift-In-Turn cutting unit leveling feature virtually eliminates the effect known as “Triplex-Ring”. This substantially improves both the aesthetics and playability of the green.
Superior cutting performance is only the beginning. The patented Lift-Gate Footrest, Tool-Free QuickChange™ cutting units, Automatic “Slow-in-Turn” during Transport and Auto-Brake on Operator Dismount are just a few of the many new features that provide added versatility, simplified service, and ultimately, more productivity.
= Hybrid Model
| Accesorios opcionales | 3WD Kit, Light Kit, Light Kit - Front Mount Brackets, Rear Light Kit, Seat Kit (Standard or Premium), Left Armrest Kit (Standard), Armrest Kit (Premium), Canopy, Utility Bag Kit, Wireless Hour Meter, Seat Cover |
|---|---|
| Accesorios para unidades de corte | 8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options. |
| Ajuste de la contracuchilla | Dual screw, indexed “click” adjustment to the reel; detents correspond to 0.0007" (0.018 mm) bedknife movement for each position. |
| Altura | 80.8" (205 cm) |
| Altura de Corte | Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed. |
| Anchura de corte | 59" (150 cm) |
| Anchura Total | 70.9" (180 cm) |
| Arranque | Arranque con llave |
| Bastidor principal/chasis | Three tie-down locations (2 side, 1 rear). |
| Batería | 12 V/48 V |
| Cargador |
Off-board high efficiency 1200W smart charger.
|
| Círculo de giro (diámetro) | 69.8" (182 cm) clearance to cutting unit motor |
| Contracuchilla | Replaceable single edged, EdgeMax™ Microcut Bedknife is standard on all cutting units. |
| Controles | Traction Pedal: Forward/Neutral/Reverse; Joystick: Raise/Lower; Function control switch: Neutral, Mow, Transport; Key switch; Steering Arm Lock Pedal; Brake pedal; Parking Brake; InfoCenter; Seat Adjusting Lever; Main Power Connectors |
| Descripción del sistema de dirección | 48V electric steering motor with torque feedback device. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning. |
| Diámetro del molinete | 12.7cm (5") |
| Dirección asistida | Sí |
| Distancia entre ejes | 49.8" (126.5 cm) |
| Distribución del césped | Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
| Elevación/bajada de la unidad de corte | 48V electric linear actuators with fully integrated brushless permanent magnet motor and controller. Fully sealed with splash guard. Center lift actuator drop and raise delay is dependent on machine velocity. |
| Estilo/tipo de cuchilla | Reel |
| Frecuencia de corte/autoafilado | Standard, on-board and adjustable speed from 200–520 RPM |
| Frenos de servicio/estacionamiento | Traction motor regenerative braking; foot pedal service/parking brake, linear-actuated automatic parking brake. |
| Indicadores/Instrumentación | InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control, clip control, calibration of 48V components, advanced machine diagnostics. |
| Longitud | 98" (249 cm) with baskets |
| Luces | Opcional |
| Neumáticos delanteros | 19" x 10.50"-8", 4 lonas, dibujo liso |
| Neumáticos traseros | 19" x 10.50"-8", 4 lonas, dibujo liso |
| Número de cuchillas | 11, 14, 8 |
| Peso | Mow: 1274 lbs (578 kg) Transport: 1,557 lbs (706 kg) |
| Portavasos | De serie |
| Reposabrazos | Opcional |
| Rodillos | Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft. |
| Seguridad del operador | Sound Power: 82 db(A) At Operator's Ear: 66 db(A) |
| Separación del suelo | 3.8" (9.7 cm) |
| Sistema Eléctrico | 48V System for traction motor circuit, steering motor circuit, cutting unit motor circuit and lift / lower actuator circuit. 12V system for primary controls and brake actuator. Energy capacity: 10.77 kWh; 48V nominal. |
| Sistema RDS™ | Radius Dependent Speeds – Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel (patent-pending). Wheel Speed Control: Individual wheel speed control during turns (patent-pending). Lift-In-Turn: Provides level cut from side to side of cutting units regardless of turning angle (patented). |
| Tipo de combustible | Eléctrica |
| Tipo de cuchilla (descripción) | Reels are 5" (13 cm) in diameter, 21" (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375" (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. |
| Tipo/configuración de la unidad de corte | Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) |
| Transmisión de los implementos | Tres motores de molinete de imán permanente sin escobillas, refrigerados por aire, de 48 V (1.1 kW) con controlador separable. |
| Transmisión de tracción | 2WD |
| Transmisión de tracción | Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. Optional 3WD. (patent-pending). |
| Transmisión del molinete/cilindro | Eléctrica |
| Tren de transmisión | Eléctrica |
| Tren de transmisión (Descripción del motor) | Eight Lithium-Ion batteries. |
| Velocidad de avance hacia adelante | 0 - 10 mph (0 - 16 km/h) |
| Velocidad de avance hacia atrás | 0 - 5 mph (0 - 8 km/h) |
| Velocidad de siega | 0 - 5 mph (0 - 8 km/h) |
Seleccione el año de su modelo entre las opciones siguientes para ver piezas y manuales.
**Para más detalles sobre la garantía, póngase en contacto con su concesionario.