Toro STX-38 Stump Grinder

  • Model: 23214
  • UPC/EAN: 21038232140
See All Items in STX Stump Grinders
  • Intelli-sweep® automatically adjusts cutting head sweep speed
  • Turn stumps to chips quickly
  • Hydraulically driven cutting head
  • No tire ruts or flat tires

Overview

Toro® STX-38 Stump Grinder is built for outstanding durability in the toughest conditions. Fully hydraulic operation means no chance of expensive belts breaking or slipping and no tension adjustments. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. And with easy-to-use TX-style controls and tracks for maneuverability and stability, the STX-38 is extremely operator-friendly. The STX-38's electronic fuel injection engine provides less maintenance, easier starting, and improved performance. Best of all, ground speeds of 4.5 mph allow you to spend more time grinding — and less time transporting the machine — for greater productivity.

Features

STX26 stump grinding a medium stump
Intelli-sweep®
Intelli-sweep automatically adjusts cutting head sweep speed based on the load on the wheel, so the engine runs efficiently during heavy loads.
STX38 stump grinding in the dirt
Faster and Easier
From pine to oak, the Toro STX hydraulic stump grinder turns stumps to chips quickly and efficiently.
STX38 stump grinding a large stump
Advanced Cutter Head
Hydraulically driven cutting head with hydraulic flow directly to cutter head for maximum performance. Design minimizes maintenance with no belts or pulleys to replace.
ST26 stump grinding with a man wearing a hard hat and shield
Innovative Track System
Low center of gravity and large footprint increases stability on hillsides. Tracks handle soft, wet ground conditions, climb curbs and allow zero-turn capability.

Specifications

Compliance CE and EPA compliant
Cooling System Air Cooled
Cutter Depth - Below Grade 18 in. / 45. 7 cm
Cutter Height - Above Grade 35 in. / 88.9 cm
Engine Horsepower 38 hp
Engine Make Kohler
Engine Model Kohler® Command PRO® ECV980
Fuel Type Gasoline
Head Swing 52" (132 cm) arc length x 60˚ sweep arc
Height 51 in. / 129.5 cm
Hydraulic Pressure 3,000 PSI (207 BAR)
Hydraulics Dual hydrostatic traction drive – 16 cc hydropumps with 15 gpm max flow to each side; 20 gpm gear pump flow to the piston motor driving the cutter head
Length 95 in. / 241. 3 cm
Start Method Electric
Transmission Hydrostatic
Travel Speed - Forward Up to 4.5 mph / 7.2 kph
Weight 1,750 lbs / 794 kg
Wheel 22.25" (56.5 cm) diameter to tooth; 1" (2.5 cm) thick; 16 grinder teeth
Width 34 in. / 86.3 cm

Documents

Title Documents
STX-38 EFI Sell Sheet PDF - Sellsheet-en-CA
Tree Care Equipment Brochure PDF - Brochure-en-CA

 

Warranty

For complete product warranty information contact Toro Customer Service

**See dealer for Warranty details.