Skip to main content

Série 2000 de 122 cm (48 po), 18,3 kW (24,5 cv), 708 cm³

Série 2000 de 122 cm (48 po), 18,3 kW (24,5 cv), 708 cm³

Série 2000 de 122 cm (48 po), 18,3 kW (24,5 cv), 708 cm³

Product Information

  • Model #: 77281
  • Serial #: 417302473 - 418012032
  • Product Type: Riding Products

Search for a part within assembly drawings:

Showing Results

Drawing Title Part Number Description
Title



Air Cleaner Assembly No. 93-2190
Air Cleaner Assembly No. 93-2190
Decal Assembly
Decal Assembly
Deck Assembly
Deck Assembly
Deck Decal Assembly No. 147-7371
Deck Decal Assembly No. 147-7371
Deck Lift Assembly
Deck Lift Assembly
Deck Strut Assembly No. 140-1179
Deck Strut Assembly No. 140-1179
Deflector Assembly No. 144-2635
Deflector Assembly No. 144-2635
Electrical Assembly
Electrical Assembly
Engine, Clutch and Muffler Assembly
Engine, Clutch and Muffler Assembly
Fork and Caster Assembly
Fork and Caster Assembly
Frame Assembly
Frame Assembly
Front Caster Wheel Assembly
Front Caster Wheel Assembly
Fuel Assembly
Fuel Assembly
Hydro Drive Assembly
Hydro Drive Assembly
Idler Arm Assembly No. 139-1087
Idler Arm Assembly No. 139-1087
Left and Right Motion Control Assembly
Left and Right Motion Control Assembly
LH Transaxle Assembly No. 145-8424
LH Transaxle Assembly No. 145-8424
Motion Control Assembly
Motion Control Assembly
Rear Drive Wheel Assembly
Rear Drive Wheel Assembly
RH Transaxle Assembly No. 145-8425
RH Transaxle Assembly No. 145-8425
Roll-Over Protection System Assembly No. 139-8062
Roll-Over Protection System Assembly No. 139-8062
Seat Assembly No. 147-2384
Seat Assembly No. 147-2384
Seat Mount Assembly
Seat Mount Assembly
Spindle Assembly No. 139-2357
Spindle Assembly No. 139-2357
Throttle, Choke and Guards Assembly
Throttle, Choke and Guards Assembly
Wire Harness Assembly No. 147-2363
Wire Harness Assembly No. 147-2363
Download Parts Catalog
Operator's Manual
Service Manual
Parts Catalog
Setup Instructions
Product Warranty
Hypr-Oil™ 500 (quart)
Hypr-Oil™ 500 (quart) (Part # 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Hypr-Oil™ 500 (gallon)
Hypr-Oil™ 500 (gallon) (Part # 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
HYPR-OIL 500-5 GALLON (Part # 114-4715)
Striper Kit (Part # 126-7882)
Riding Mower Jack Kit
Riding Mower Jack Kit (Part # 127-6666)
Ce kit de cric pour tondeuse autoportée d’origine Toro® est conçu pour soulever et soutenir en toute sécurité votre tondeuse autoportée ou à rayon de braquage nul Toro. Vous avez ainsi un accès stable et sécurisé au dessous du tablier, pour changer les lames, remplacer les courroies et effectuer l’entretien courant. C'est l'un des accessoires les plus pratiques à l'achat pour tout nouveau propriétaire de tondeuse : investir dès le départ dans un cric approprié évite les méthodes de levage improvisées qui comportent des risques de blessure et d'endommagement du matériel. Avant de passer commande, vérifiez les numéros de modèle et de série de votre machine.
16.5 Inch Hi-Flow Blade
16.5 Inch Hi-Flow Blade (Part # 133-2137)
Toro 16.5 Inch OEM Hi-Flow blade. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
16.5 Inch Atomic Blade
16.5 Inch Atomic Blade (Part # 133-2160)
Toro 16.5 Inch OEM Atomic blade. The Toro Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
165 Inch Recycler Blade
165 Inch Recycler Blade (Part # 133-2163)
Toro 16.5 Inch OEM Recycler blade. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
16.5 Inch Hi-Flow Blade Pack - 6 Blades
16.5 Inch Hi-Flow Blade Pack - 6 Blades (Part # 133-2176)
Toro16.5 Inch OEM Hi-Flow blade pack. (6) Hi-Flow blades. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
48 Inch Atomic Blade Pack - 6 Blades
48 Inch Atomic Blade Pack - 6 Blades (Part # 133-2182)
Toro 16.5 Inch OEM Atomic blade. (6) blade pack. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Logo des pièces d’origine Toro
Spark Arrestor (Part # 137-8098)
Pièce OEM d'origine 139-3649
Pneus radiaux sans air pour gazon MICHELIN® X® TWEEL® (46 cm/24 po) (Part # 139-3649)
Un pneu radial sans air (non pneumatique) MICHELIN® X® TWEEL® est une unité simple qui remplace l’ensemble pneu et roue actuel. Il n'y a pas besoin d'équipement complexe pour le montage, et une fois le pneu boulonné en place, aucun entretien de la pression de l’air n’est nécessaire. Le transfert d'énergie unique au sein des branches en poly-résine contribue à réduire les "rebonds" associés aux pneumatiques, tout en assurant une maniabilité hors pair. Le pneu radial sans air MICHELIN X TWEEL Turf est une unité monobloc qui remplace l’ensemble pneu et roue conventionnel, éliminant totalement le besoin de pression d'air. Résultat : pas de crevaisons, pas d'immobilisation et pas de kits de réparation. La durée de vie d'un pneu TWEEL est nettement supérieure à celle d'un pneu pneumatique comparable, ce qui réduit la fréquence de remplacement et le coût total de possession au fil du temps. Avant de passer commande, vérifiez les numéros de modèle et de série de votre machine pour confirmer la bonne taille.
48 inch Recycler Kit (GrandStand)
48 inch Recycler Kit (GrandStand) (Part # 139-6650)
Ce kit Recycler® de 122 cm (48 po) d’origine Toro® est conçu spécifiquement pour les tondeuses à conducteur debout Toro GrandStand®. Il transforme le tablier en mode de déchiquetage Recycler® complet. Une fois installé, le système Recycler® breveté coupe les brins d’herbe entre 6 et 8 fois, puis les réinjecte dans la pelouse sous forme de fines particules d’engrais naturel, riche en nutriments. Ainsi, dans la plupart des conditions, il n’y a plus besoin de ramasser ou de ratisser l’herbe coupée. L'une des améliorations les plus populaires lors de l'achat pour les nouveaux propriétaires de GrandStand® qui souhaitent maximiser la valeur de leur machine dès le premier jour. Avant de passer commande, vérifiez les numéros de modèle et de série de votre machine.
Wheel and axle assembly (Z Master )
Wheel and axle assembly (Z Master ) (Part # 140-4896)
Z Master wheel and axel assembly.
24X9.5-12 Rear Riding Mower Wheel and Tire Assembly
24X9.5-12 Rear Riding Mower Wheel and Tire Assembly (Part # 140-7958)
Toro OEM replacement rear tire and steel wheel. This rear mounted tire delivers superior traction on turf and grass. Ideal replacement tire for residential riding lawn mowers and tractors.
TRIMMER MOUNT (Part # 144-2665)
KIT, JACK MOUNT (Part # 144-2676)
HARDTOP SUN CANOPY (Part # 144-3719)
Handle Extension Kit
Handle Extension Kit (Part # 145-3615)
Genuine OEM Part
KIT-SLOPE SENSOR (Part # 145-8442)
MICHELIN® X® TWEEL® Turf Airless Caster Wheels (13
MICHELIN® X® TWEEL® Turf Airless Caster Wheels (13") (Part # 147-6294)
The MICHELIN® X® TWEEL® Turf Caster Wheel is the next “revolution” in commercial mowing. The MICHELIN X TWEEL Turf Caster Wheel has all the qualities you would want in a pneumatic tire but it never needs air. No more flats, downtime, patch kits or replacement tires. And in the area of wear and tear, this “tire” has a wear life that is three times that of a pneumatic.
Bucket Mount Kit, Z Master 2000 or 4000 Series Riding Mower (Part # 147-6345)
Universal Mount Kit, Z Master 2000 or 4000 Series Riding Mower (Part # 147-6346)
Kit-Baffle, Turbo Force 48 (Part # 147-7360)
KIT-ARM REST (Part # 147-7397)
KIT-ELEC DECK LIFT (Part # 147-7867)
KIT-2IN RECIEVER HITCH (Part # 161-2810)
Fuel Pickup with Screen, Kit (Part # 161-6806)
48" CHUTE GATE KIT (Part # 163-4118)
Toro V-Twin Engine Maintenance Kit (Titan HD/ Z Master 2000 Series)
Toro V-Twin Engine Maintenance Kit (Titan HD/ Z Master 2000 Series) (Part # 20295)
Toro maintenance kits contain everything the "do-it-yourselfer" needs to keep a Toro machine running like new. It's an easy and convenient way to ensure your Toro equipment will run its best year after year. All components are approved by Toro engineers for use with the Toro engines on the Toro TimeCutter chassis. Kit includes A fuel filter (#139-0717), an oil filter (#136-7848), an air filter (#108-3811), 2 spark plugs (#21-3250), 2 fuel treatment packets (#130-2393), and 10W30 oil.
BAGGER KIT, Z MASTER 2000 / 4000 (Part # 78439)
Conteneur d'images vide
4000 Series E-Z Vac Blower & Drive Kit for 48" Deck (Part # 78464)
4000 Series E-Z Vac Blower & Drive Kit for 48" Deck - use with 4000 Series Twin Soft Bagger 48 - 60" Deck (#78463)

Model #

77281

Serial #

417302473 - 418012032

Product Name

Série 2000 de 122 cm (48 po), 18,3 kW (24,5 cv), 708 cm³

Product Brand

Toro

Product Type

Riding Products

Product Series

Zero Radius Turn, Commercial 2000 Series

Chassis Type

ZRT - LCE

Swath

48 inch / 122 cm

Discharge

Side Discharge

Engine/Motor Manufacturer

Toro

Engine/Motor Size

24.5 hp

Engine/Motor Type

4 Cycle

Engine Starter

Electric

Transmission Type

Hydrostatic

Traction Type

Rear WD

Engine: Battery

12V 300CCA

Engine: Engine Speed

3600±100 RPM

Engine: Spark Plug Gap

.030"/ .76mm

Chassis: Height of Cut Range

1.5" - 5" (38-127mm)

Drive System: Ground Speed

0-10 mph / 0-16kph

Engine: Ignition Coil Air Gap

0.011in (0.3mm)

Chassis: Tire Pressure

12-14psi (83-97kPa)

Engine: Spark Plug

Champion RN9YC / NGK BPR6ES

Engine: Engine Oil Type

2.5 qts (80 oz. or 2.4L) 10W-30 with filter change

Drive System: Gearbox Lubricant

HYPR-OIL 500 / 20w-50 Synthetic Motor Oil