• 2.6 kW (3.5 hp) Honda® petrol engine
  • Full gear drive transmission with integral traction differential and traction drive disconnect to ease movement during service / maintenance operations. Interchangeable drum drive gear cases.
  • 46 cm to 66 cm Cutting Width
  • Ground Speed – Mowing: 2 to 3.5 mph; Transport: 0 to 5.3 mph

Toro’s new line of fixed-head walk-behind greensmowers have been completely re-engineered to bring each operator and greensmower into perfect harmony with one another. Multiple innovations – starting with an industry-first telescoping handle – come together to deliver unparalleled cut quality and consistent playability on each and every green. The modular design also makes the Greensmaster 1000 Series mowers easier than ever to maintain, saving significant time and money and lowering the total cost of ownership.

Choose from 3 models, including the Greensmaster 1018, 1021 and 1026 with cutting widths of 46 cm, 53 cm and 66 cm respectively. Detachable cutting unit options with 8, 11, or 14 blade EdgeSeries™ reels are readily available to manicure your turf the way you prefer.


  • Greensmaster® 1018
  • Greensmaster® 1021
  • Greensmaster® e1021 Lithium-Ion Powered
  • Greensmaster® 1026

Proven Honda GX 120 Engine

2.6 kW (3.5 hp) (at 3,600 rpm) Honda engine with ample power for cutting and accessorising.

Telescoping Handle

Engineered to accommodate operators of different heights, for mowing in a natural upright position. Leads to less fatigue and a superior cut. Adjustable to 5 distinct handle positions.

Handle Isolation Mounts

Two rubber grommets eliminate minor oscillations in Height-of-Cut caused by walking strides. Delivers a consistent cutting height on each and every green for optimal playability.

Dual Function Bail

A single bail combines safety and ease-of-operation. Convenient operation allows the mower to slow down or come to a full stop during turn-arounds without disengaging traction to line up for next mowing pass. Also ideal when using turn-around mats to preserve collar health.

Reel Engagement Lever

Convenient, easy to reach location to engage reel from the operator position.

Easy-Reach Adjustable Throttle

All operator controls are within easy reach to perfect the mowing process, improve cut consistency, and enhance control – in normal and tight turn-around situations.

Hi-Lo Clip Rate Knob

Clip frequency can easily be changed in the field to mow the perimeter, collars etc. The quick-change feature also can be locked out for added control.

Standard or Interlaced Grooming

Numerous quick-change options and accessories are available to help customise the cut and aftercut appearance.

Durable Gear Drive Transmission

Provides long life and best-in-class transmission durability. Lubricated for life, no grease points.

Detachable DPA Cutting Units

Change cutting units in just a few minutes! Easily choose between an 8, 11 or 14 blade EdgeSeries™ reel cutting unit configuration. Simply unbolt and replace an entire cutting unit for service or a simple exchange - to avoid costly down time.

Modular Sub-Assembly Design

Make repairs simple and quick. The engine , transmission, drum or cutting unit sub-assemblies can be easily removed for timely and cost effective replacement or repair.

Simple Conversion from Greens to Tees

The innovative swing axle design can quickly convert the machine from a Greens to a Tee mower by keeping the bedknife cutting edge in an optimal position for the respective cutting height and the handle location in the correct ergonomic position.

Traction Release Lever

Disengage the traction with a simple lever twist. Getting around the shop has never been easier!

Onboard Back-Lapping Option

The entire Greensmaster 1000 Series fleet can be back-lapped simultaneously without additional motors or bench tools. (Available on the GR 1021 and 1026 only).

  • Engine
    Honda® petrol engine 2.6 kW (3.5 hp) @ 3,600 rpm
  • Mowing Speed
    2.0 to 3.5 mph
  • Cutting Width
    46 to 66 cm
  • Height of Cut
    1.524 to 31.75 mm
  • Number of Blades
    8-blade, 11-blade, and 14-blade cutting units available
  • Drive System
    Dual position traction drum with positions for contour following or forward weight bias at higher heights of cut.
  • Certification
    Designed in accordance to applicable ANSI and CE specifications.
  • Weight
    95.2 to 108.8 kg
  • Warranty Two-year limited warranty

    For complete product warranty information contact Toro Customer Service